LP11BC02030 SFP+ Cage With Heat Sink EMI Spring Finger Press-Fit Through Hole, Right Angle
P/N:
LP11BC02030
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LP11BC02030
- Compatible Brands: LINK-PP
- Lightpipe Options: Without Lightpipe
- PCB Termination: Through Hole - Press-Fit
- Operating Temperature (°C): -55-85
- Number of Ports: 1x1
- Connector Types: SFP+
- P/N: LP11BC02030
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Competitor P/N: LP11BC02030
Product Specifications
| LINK-PP Part Number | LP11BC02030 | Part Status | Active |
| Connector Style | Cage | Connector Type | SFP+ |
| Cage | COPPER ALLOY,Ni PL ATED | PACKAGING | TRAY PACKAGING |
| Port Matrix Configuration | 1x1 Port | Number of Ports | 1 |
| Operating Temperature Range | -55 – 85°C | Mounting Style | Through Hole, Right Angle |
| Included Lightpipe | - | Termination | Press-Fit |
| Height (Inches/mm) | 14.75/0.581 | Length (Inches/mm) | 49.30/1.941 |
| Width (Inches/mm) | 14.00/0.551 | EMI Containment Feature Type | EMI Springs |
1x1 SFP+ Press-Fit Cage with Heat Sink
The LINK-PP LP11BC02030 is an Active, single-port SFP+ cage assembly with a heat sink, EMI springs and press-fit termination. The supplied specification identifies nickel-plated copper-alloy cage material, tray packaging and a right-angle through-hole mounting style.
This is a mechanical, thermal and shielding assembly. It does not convert optical signals, implement a network protocol or determine the transceiver's data rate. Integration requires a matching host connector, the specified PCB hole pattern, panel geometry and clearance for the module and heat sink.
Design Positioning and Qualification
The LP11BC02030 should be selected against the host design's documented mechanical and interface requirements. No additional third-party equivalent or platform qualification is established by this page.
Mechanical and System Integration Considerations
- Press-fit holes: Use the cage drawing to define hole sizes, locations and board thickness requirements; do not substitute a solder-tail footprint.
- PCB keep-outs: Follow the drawing's separate component, trace and chassis-ground regions instead of applying a blanket copper exclusion rule.
- Thermal clearance: Check the heat-sink envelope and module insertion path with the intended airflow. A component temperature rating does not establish host cooling capacity.
- Panel grounding: Review the spring contact locations, panel cutout and chassis-ground connections as part of the enclosure design.
Procurement and OEM Qualification
For a quotation or sample request, provide the full LP11BC02030 part number, quantity, target application and required drawing revision. Confirm the selected package, assembly conditions and any required qualification records with LINK-PP. Complete sample evaluation and AVL approval before volume release; request current availability and lead time for the order.
Engineering Verification Checklist
- Identity: Match the full ordered part number and suffix to the drawing and sample.
- Documentation: Resolve the revision-check items above before PCB or system approval.
- Interface: Compare the drawing connections or mechanical interface with the target design.
- Assembly: Verify the footprint, installed envelope and approved manufacturing process.
- Operating conditions: Confirm the applicable component ratings and host environment.
- Production release: Record sample results, required documents and AVL acceptance.
Frequently Asked Questions
Is LP11BC02030 an optical transceiver?
No. It is a cage assembly used with a suitable host connector and removable module. Optical and protocol functions belong to the selected transceiver and host electronics.
Can it use a solder-through-hole cage footprint?
Do not assume so. This model lists press-fit termination; hole size, tolerance and mounting requirements must follow its own drawing.
Does the heat sink guarantee a module operating temperature?
No. Check the selected module's power dissipation, airflow, ambient conditions and the installed thermal path on the target system.
Which drawing should be used for board and panel layout?
Use the corresponding LP11BC02030 assembly and recommended PCB configuration sheets. Confirm the catalog dimension units and drawing datums before layout release.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































