HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
AI / HPC CLUSTER NETWORKING

AI & HPC Cluster Networking with 400G and 800G Interconnects

LINK-PP provides high-speed optical and electrical interconnects for GPU clusters, AI training fabrics and HPC networks, including OSFP, QSFP-DD and QSFP112 transceivers, DAC, AEC and AOC assemblies for server-to-leaf, leaf-to-spine and rack-to-rack connectivity.

AI COMPUTE FABRIC SPINE 01 SPINE 02 LEAF 01 LEAF 02 LEAF 03 400G / 800G FABRIC LINKS GPU SERVER NIC / HCA GPU SERVER NIC / HCA GPU SERVER NIC / HCA 200G / 400G / 800G SERVER LINKS SCALE-OUT GPU / HPC NETWORK
GPU → NIC/HCA → LEAF → SPINE DAC · AEC · AOC · OPTICS
Server-facing links Leaf-spine fabric

Quick answer: AI cluster networking connects GPU servers, accelerators, NICs or HCAs, leaf switches and spine switches through a high-bandwidth, low-latency scale-out fabric. Modern deployments increasingly use 200G, 400G and 800G interconnects, with the physical media selected according to port type, topology, cable reach, power budget, thermal limits and platform compatibility.

Network Role
GPU Scale-Out Fabric
Link Speeds
200G · 400G · 800G
Form Factors
OSFP · QSFP-DD · QSFP112
Media
DAC · AEC · AOC · Fiber
AI FABRIC REQUIREMENTS

Why AI Clusters Place Different Demands on the Network

Distributed AI training and HPC workloads create intensive east-west communication between compute nodes. The interconnect must therefore be designed around bandwidth, latency, topology, reach and operational scale rather than link speed alone.

01 · Bandwidth

High East-West Traffic

Distributed workloads exchange large volumes of data between accelerators, making server-to-leaf and leaf-to-spine bandwidth a critical design constraint.

02 · Latency

Low-Latency Data Movement

Interconnect latency affects collective communication and distributed workload efficiency, especially as cluster size and synchronization requirements increase.

03 · Density

High Port Density

Large GPU clusters require hundreds or thousands of high-speed links, increasing pressure on switch radix, cable routing, connector density and rack-level thermal design.

04 · Reliability

Predictable Link Operation

Physical-layer stability, thermal margins and platform compatibility become increasingly important when the fabric contains large numbers of identical high-speed links.

AI CLUSTER ARCHITECTURE

Where High-Speed Interconnects Fit in a GPU Cluster

A scale-out AI fabric commonly connects GPU servers through NICs or HCAs to leaf switches, with leaf switches connected through a spine layer. Physical connectivity requirements vary between server, rack and fabric tiers.

SPINE LAYER SPINE SWITCH SPINE SWITCH 400G / 800G LEAF-SPINE LINKS LEAF 01 LEAF 02 LEAF 03 SERVER-TO-LEAF LINKS GPU SERVER NIC / HCA GPU SERVER NIC / HCA GPU SERVER NIC / HCA PHYSICAL INTERCONNECT OPTIONS DAC · AEC · AOC · OSFP · QSFP-DD · QSFP112

Fabric Link Implementations

  • SERVER → LEAFGPU Server → LeafTypically the most numerous links in the cluster. Selection depends on NIC/HCA port type, switch port type, rack layout, reach and cable-management requirements.
  • FABRICLeaf → SpineHigh-bandwidth fabric links may use 400G or 800G optical interconnects depending on switch generation, radix and network topology.
  • RACK CONNECTIVITYRack → RackAs physical distance increases, AOC or pluggable optical transceivers become increasingly relevant compared with short-reach copper interconnects.
  • BREAKOUTBreakout ConnectivityHigh-density ports may support breakout architectures such as 800G to 2×400G or 400G to lower-speed interfaces where supported by the host platform.
FABRIC SPEED

400G and 800G Connectivity for AI Fabrics

The required link rate depends on GPU generation, NIC or HCA capability, switch architecture, oversubscription target and the scale of the compute fabric.

200G

HPC and Previous-Generation AI Fabrics

200G remains relevant in existing HPC, HDR InfiniBand and earlier-generation accelerated computing environments.

QSFP56HDRPAM4
400G

High-Density GPU Cluster Connectivity

400G links are widely used for server-facing and fabric connectivity in modern accelerated computing networks.

QSFP-DDOSFPQSFP112
800G

Next-Generation AI Scale-Out Fabrics

800G increases per-port bandwidth and enables high-radix fabric designs for dense GPU clusters and AI infrastructure.

OSFPQSFP-DD800800G Ethernet
INTERCONNECT SELECTION

DAC vs AEC vs AOC vs Optical Transceivers

The best interconnect is determined by more than speed. Reach, power, cable bulk, serviceability, thermal conditions and host compatibility all affect the final choice.

Media
Typical Reach
Where It Fits
Engineering Considerations
Passive DAC
Very Short Reach
Same-rack server-to-leaf links
Lowest electronics overhead, but reach and cable bulk become limiting factors at higher speeds.
AEC
Short Reach
Dense rack-level high-speed links
Active electrical equalization extends copper reach but introduces power and platform-compatibility considerations.
AOC
Short / Medium Reach
Rack-to-rack or dense intra-data-center links
Lower cable weight and improved routing compared with copper, but optical engines are permanently attached.
Optical Transceiver
Medium / Long Reach
Leaf-spine, rack-to-rack and longer fabric links
Supports structured fiber cabling and field-replaceable optics. Wavelength, fiber type and connector architecture must match the link.
FORM FACTOR

OSFP, QSFP-DD and QSFP112 in AI Networking

OSFP

High-Power 400G / 800G Platforms

OSFP provides a larger thermal envelope and is commonly used in high-bandwidth AI and HPC platforms. Actual compatibility depends on the switch, NIC or HCA port implementation.

QSFP-DD

High-Density Pluggable Optics

QSFP-DD supports high-density 400G and 800G optical implementations and is used across multiple generations of data-center switching platforms.

QSFP112

4-Lane 112G Electrical Architecture

QSFP112 uses four high-speed electrical lanes and is relevant to 400G Ethernet and NDR-class connectivity in compatible networking platforms.

FABRIC CONTEXT

Ethernet and InfiniBand AI Cluster Connectivity

The physical interconnect must be selected in the context of the host platform and network architecture. Ethernet and InfiniBand can use similar high-speed pluggable form factors, but protocol, firmware, port configuration and compatibility requirements remain platform-specific.

ETHERNET AI FABRIC

High-Speed Ethernet / RoCE

Ethernet-based AI fabrics may use RoCE and other congestion-management technologies to support high-bandwidth GPU communication while maintaining compatibility with Ethernet networking ecosystems.

200GbE400GbE800GbERoCE
INFINIBAND FABRIC

HDR / NDR-Class Connectivity

InfiniBand remains widely deployed in HPC and accelerated computing environments. Optical modules and cables must be validated against the target HCA and switch platform rather than selected by mechanical form factor alone.

HDRNDRQSFP56OSFP
REACH PLANNING

Select AI Cluster Interconnects by Link Distance

Distance is one of the fastest ways to narrow the physical interconnect options, but final selection still requires verification against the actual product specification and host platform.

Very Short

Inside the Rack

Passive DAC where supported by speed, port and cable-routing requirements.

Short

Rack-Level Links

AEC or short-reach active cable assemblies where passive copper is insufficient.

≈50–100 m

Short-Reach Optical

Multimode AOC or SR-class optical links depending on the platform and cabling architecture.

≈500 m–2 km

Single-Mode Fabric

DR/FR-class optical architectures for structured single-mode fiber deployments.

Up to ~10 km

Longer Data Center Links

LR-class optical solutions where longer single-mode reach is required.

PLATFORM COMPATIBILITY

Compatibility Matters Beyond the Form Factor

An OSFP or QSFP-DD module that mechanically fits a port is not automatically suitable for that platform. EEPROM coding, firmware behavior, electrical mode, breakout configuration, power class and thermal implementation must also be verified.

NVIDIA Platforms

Validate switch or NIC/HCA generation, port mode, OSFP implementation, breakout requirements and firmware behavior.

Arista Platforms

Verify port speed, transceiver type, EOS support and required breakout configuration for the target switch.

Cisco Platforms

Confirm platform-specific optics support, port capabilities, software release and DOM or EEPROM requirements.

Other AI / HPC Platforms

Compatibility validation should use the exact switch, adapter and firmware combination rather than brand name alone.

CONNECTIVITY PORTFOLIO

LINK-PP Interconnects for AI & HPC Clusters

Select the product family according to fabric speed, host form factor, media type and required reach.

800G

800G Optical Transceivers

High-bandwidth OSFP and QSFP-DD800 optical modules for next-generation AI fabric connectivity.

OSFPQSFP-DD800SR8DR82×FR42×LR4
Explore 800G Optics →
400G

400G Optical Transceivers

400G pluggable optics for server-facing, leaf-spine and data-center fabric links.

QSFP-DDOSFPDR4FR4LR4
Explore 400G Optics →
ELECTRICAL

DAC & AEC Assemblies

Short-reach electrical interconnects for dense rack-level GPU server and switch connectivity.

200G400G800GBreakout
Explore High-Speed Cables →
OPTICAL CABLE

AOC Assemblies

Active optical cables for short and medium data-center connections where lower cable weight and simplified optical deployment are required.

200G400G800G
Explore AOC →
ENGINEERING RFQ

What to Send for an AI Cluster Interconnect Recommendation

A useful recommendation requires the actual network architecture. Sending only “800G module required” leaves rather a lot for everyone to guess.

Host Platform

  • Switch manufacturer and model
  • NIC / HCA manufacturer and model
  • Port form factor
  • Software / firmware version where relevant

Link Requirements

  • 200G / 400G / 800G link rate
  • Required cable distance
  • Fiber type or copper preference
  • Straight or breakout configuration

Deployment Requirements

  • Number of GPU nodes
  • Links per node
  • Leaf / spine topology
  • Estimated deployment volume
ENGINEERING RESOURCES

AI & HPC Networking Technical References

Use the technical guides below to move from architecture selection to specific interconnect and compatibility decisions.

FAQ

AI Cluster Networking Questions

What network speeds are commonly used in AI clusters?

Modern AI and HPC clusters can use 100G, 200G, 400G and 800G links depending on GPU density, NIC or HCA capabilities, switch architecture and workload requirements. The appropriate speed should be determined from the actual compute and network architecture rather than selected independently.

When should an AI cluster use DAC, AEC, AOC or optical transceivers?

Passive DAC is generally considered for very short electrical links. AEC can extend short electrical connectivity where active equalization is appropriate. AOC provides lightweight short-reach optical connectivity, while pluggable optical transceivers are better suited to structured fiber systems and longer rack-to-rack or switch-to-switch links.

What is the difference between OSFP and QSFP-DD for AI networking?

Both are high-density pluggable form factors used for high-speed data-center networking. OSFP provides a larger mechanical and thermal envelope, while QSFP-DD provides a compact high-density architecture. The correct choice is determined by the actual host port rather than by the network application alone.

Can 800G ports be broken out into 400G links?

Some platforms support configurations such as 800G to 2×400G. However, breakout capability depends on the switch or adapter, electrical lane mapping, transceiver or cable assembly, firmware and port configuration. The exact host platform must therefore be verified before selecting a breakout solution.

Are Ethernet and InfiniBand optical modules interchangeable?

Not automatically. Even when modules use the same mechanical form factor, Ethernet and InfiniBand platforms may have different electrical modes, firmware expectations, EEPROM requirements and supported optical specifications. Compatibility must be verified against the exact switch and NIC or HCA.

NEXT STEP

Turn Your AI Fabric Topology Into an Interconnect BOM

Provide the switch, NIC/HCA, speed, topology and reach. LINK-PP can help map each physical link to an appropriate optical or electrical interconnect option.

For Network Architects

Review the Fabric

Send the leaf-spine topology, host adapters and required link rates for interconnect mapping.

Contact Engineering →
For Procurement

Request AI Cluster Pricing

Provide the required part numbers, quantities and deployment schedule for pricing, MOQ and lead-time review.

Request a Quote →
For OEM / Integrators

Submit Your Cluster BOM

Submit the switch-to-server and switch-to-switch connectivity BOM for compatible optics, DAC, AEC and AOC alternatives.

Submit BOM →