SFP+ Cages & Connectors
TE
2X1 SFP+ Cage & Connectors
LP21BC01101
TE 2170409-5 Compatible LINK-PP LP21BC01101 SFP+ 2x1 Port Cage Connector With Outer/Inner LightPipe
TE
1X1 SFP+ Cage
2291634-3
2291634-3 TE Compatible LP11BC02060 SFP+ Cage With Heat Sink 16 Gb/s External Springs
SFP+ Cages & Connectors
Explore SFP+ cages and host connectors for single-port, ganged and stacked designs. Compare port layouts, PCB mounting methods, EMI shielding, heat sink and lightpipe options. Check the product drawing and included components before selecting a part.
SFP+ Cage and Connector Selection
SFP+ cages and host connectors provide the mechanical and electrical interface between an SFP+ module and the host board. The cage guides and retains the module and can contribute to EMI shielding at the front panel. The host connector provides the electrical connection between the module and the PCB.
Browse single-port, ganged and stacked SFP+ cage configurations for switches, servers, network interface cards and other equipment. Depending on the part number, a product may be a cage only, a separate host connector, or an assembly that combines the cage and connector.
Choose an SFP+ Cage by Port Configuration
Start with the number of module ports and the space available on the front panel and PCB. Then check the connector arrangement, mounting method and thermal requirements for the selected product.
- 1x1 SFP+ cage: A single-port housing for one module position. Check whether the host connector is included or must be selected separately.
- 1xN ganged SFP+ cage: Multiple ports arranged in one horizontal row, including 1x2, 1x4 and 1x6 configurations.
- 2xN stacked SFP+ cage: Two rows of ports for designs that need higher front-panel port density. Check the connector arrangement, lightpipe positions and assembly height for the specific part.
Explore the 1x1 SFP+ cage, 1x2 SFP+ cage, 1x4 SFP+ cage and 2x4 SFP+ cage and connector categories.
Key Factors When Selecting an SFP+ Cage
- Product type: Confirm whether the part is a cage only, a host connector, or an integrated cage-and-connector assembly.
- Port layout: Match the 1x1, ganged or stacked configuration to the PCB layout and front-panel opening.
- PCB mounting: Check the mounting method of each component. A press-fit metal cage may be used with a separately mounted SMT host connector; the exact arrangement depends on the part.
- EMI shielding: Compare the spring fingers or other shielding features with the enclosure opening, grounding design and assembly tolerances.
- Heat sink and airflow: If a heat sink is required, verify its installed height, module contact, airflow direction and available clearance.
- Lightpipe and LED alignment: Where lightpipes are included, compare their position and length with the PCB LEDs and front-panel openings.
- Electrical performance: Review the host connector rating and the requirements of the complete module-to-PCB channel for the intended application.
- Environmental requirements: Confirm the operating temperature and other applicable limits in the selected product specifications.
Press-Fit Cage and SMT Host Connector
In some SFP+ designs, the metal cage and electrical host connector are separate parts. The host connector may be surface-mounted to the PCB, while the cage uses press-fit compliant pins or solder tails. Other products combine the cage and connector in one assembly.
Before releasing the PCB layout, compare the cage hole pattern, connector land pattern and locating features. Also review board thickness, insertion tooling, front-panel clearance and any under-board component restrictions against the specific product drawing and installation instructions.
SFP+ Cage Cross-Reference and Replacement
A matching port count does not establish that two SFP+ cage assemblies are interchangeable. For an existing PCB, compare the complete original part number and drawing with the candidate part. Review the mounting holes, connector position, EMI interface, lightpipe locations, heat sink clearance and operating conditions.
For examples of drawing-based comparison, see the SFP+ and QSFP28 cage cross-reference . Replacement candidates should be qualified for the intended application before production use.
Frequently Asked Questions
What is the difference between an SFP+ cage and an SFP+ host connector?
The cage provides the mechanical housing for the module and can contribute to EMI shielding. The host connector provides the electrical interface between the module and the PCB. They may be separate components or combined in one assembly, depending on the product.
What is the difference between ganged and stacked SFP+ cages?
A ganged cage places multiple ports side by side in one row. A stacked assembly uses two rows. Compare the PCB footprint, front panel, connector arrangement, airflow and available height before choosing a layout.
Does a press-fit SFP+ cage require a press-fit host connector?
Not necessarily. Some designs use a press-fit metal cage with a separate SMT host connector. Other assemblies use different termination arrangements. Check the mounting method and drawing for each selected component.
Can an SFP+ cage be used with an SFP28 module?
Mechanical fit alone does not establish support for an SFP28 application. Check the cage and host connector specifications, the module interface, PCB channel performance and host requirements. Select and qualify the complete assembly for the intended data rate.
Do I need a heat sink on every SFP+ cage?
No single configuration suits every design. The decision depends on module power, ambient temperature, airflow, port density and the module and system thermal limits. Check the selected module and cage assembly under the intended operating conditions.
Can an SFP+ module be replaced while the equipment is running?
Hot-plug support depends on the module, host hardware and system instructions. Removing a module interrupts its active link and may affect services using that connection. Follow the host equipment manufacturer's replacement procedure.
Request SFP+ Cage and Connector Support
For product selection or a cross-reference request, send your port configuration, cage or connector type, PCB mounting requirements and available drawings. For an existing design, include the original manufacturer's full part number and drawing revision.
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications



























