2007170-1 TE SFP+ Cage Ganged (1 x 6) Connector Through Hole Right Angle
P/N:
2007170-1
Manufacturer:
LINK-PP
Compatible Brand:
TE
Compatible P/N:
2007170-1
- Compatible Brands: TE
- Product Type: Cage
- Data Rate (Gb/s): 16
- EMI Shielding: Elastomeric Gasket
- Lightpipe Options: Without Lightpipe
- PCB Termination: Through Hole - Press-Fit
- Operating Temperature (°C): -55-105
- Number of Ports: 1xN
- Connector Types: SFP+
- P/N: 2007170-1
- Manufacturer: LINK-PP
- Compatible Brand: TE
- Competitor P/N: 2007170-1
Product Specifications
| Part Number | 2007170-1 | Part Status | Active |
| Connector Style | Cage, Ganged (1 x 6) | Connector Type | SFP+ |
| Data Rate (Max)(Gb/s) | 16 | Mounting Type | Through Hole, Right Angle |
| Termination | Press-Fit | Features | EMI Shielded |
| Port Matrix Configuration | 1x6 Ports | Number of Ports | 6 |
| Number of Rear EONs per Port Column | - | Connector Mounting Type | Board Mount |
| Operating Temperature Range | -55 – 105°C | Pluggable I/O Applications | SFP+ Stacked Belly-to-Belly |
| Circuit Application | Signal | EMI Containment Feature Type | Elastomeric Gasket |
| Included Lightpipe | NO | Cage Material | Nickel Silver |
| PCB Thickness (Recommended) | 1.5mm[.059in] | Tail Length | 2.05mm[.081in] |
TE Connectivity 2007170-1 Compatible SFP+ 1x6 Cage Assembly Technical Overview
The TE Connectivity 2007170-1 is a 1x6 ganged SFP+ 6-port cage assembly with a conductive elastomeric EMI gasket designed for TE Connectivity 2007170-1 compatible applications in high-density 10Gb/s Ethernet and 16Gb/s Fibre Channel platforms. Featuring solderless press-fit PCB mounting, a nickel silver body, and belly-to-belly board mounting support, it delivers ultra-dense 6-port I/O consolidation, gapless panel grounding, and structural module retention for enterprise storage arrays, core switches, and telecom infrastructure.
- Mechanical Form Factor: 1x6 Ganged Single-Row 6-Port SFP+ Cage Assembly (Lightpipe-free low-profile footprint).
- Signal Ecosystem Support: Engineered for 10GbE optical transceivers, 16G Fibre Channel modules, and Direct Attach Copper (DAC) cables operating up to 16 Gb/s (SFF-8431).
- Board Mount Technology: Solderless Through-Hole Press-Fit termination with 2.05mm tail length, optimized for standard 1.5mm [.059 in] PCB substrates.
- Alternative Sourcing Option: Multi-source engineering options are available to support secondary sourcing strategies, BOM cost optimization, and supply chain flexibility.
TE Connectivity 2007170-1 SFP+ Cage Assembly Product Overview
TE Connectivity 2007170-1 is a 1x6 ganged SFP+ cage assembly featuring a conductive elastomeric EMI gasket, nickel silver construction, and press-fit PCB mounting. Designed for ultra-dense 6-port line cards in core switches, SAN disk arrays, and belly-to-belly motherboard topologies, this lightpipe-free 6-port assembly provides low transfer impedance grounding, environmental dust sealing, and mechanical transceiver retention across extended operating temperatures (-55°C to +105°C).
Key Benefits of TE Connectivity 2007170-1 SFP+ Cage Assembly
- Ultra-High-Density 1x6 Hex-Port Consolidation: Consolidates six SFP+ ports into a single integrated housing, drastically reducing Pick & Place placement cycles and maximizing front-panel I/O density on 1RU switch line cards.
- Conductive Elastomeric EMI Gasket Shielding: Continuous elastomeric gasket provides a seamless, gap-free perimeter ground seal across the wide 6-port panel cutout, offering superior high-frequency EMI suppression and environmental dust protection.
- Belly-to-Belly PCB Layout Support: Engineered for belly-to-belly board topologies, enabling top-and-bottom PCB mounting to double total chassis port density per slot.
- Standard 1.5mm PCB Substrate Matching: Tailored for standard 1.5mm [.059 in] motherboard thickness with 2.05mm press-fit compliant tails for optimal board retention and pin normal force.
- 16 Gb/s High-Speed Performance: Fully compatible with 10GbE, 8G/16G Fibre Channel (FC), and high-frequency CPRI wireless transport protocols.
- Multi-Source Availability: Industry-standard mechanical design enables secondary sourcing strategies to improve supply chain flexibility, lead-time management, and BOM optimization.
1x6 Ganged SFP+ Hex-Port Architecture & Belly-to-Belly Integration
Engineered in compliance with SFP+ MSA (SFF-8431) mechanical specifications, the TE Connectivity 2007170-1 features a 1x6 ganged (six side-by-side ports) housing matrix. This multi-port architecture establishes uniform port-to-port pitch across the front panel, simplifying chassis bezel cutout alignment while streamlining automated board placement compared to six discrete 1x1 cages.
Belly-to-Belly High-Density Line Card Design
The right-angle board mount geometry and 2.05mm [.081 in] press-fit tail length are optimized for standard 1.5mm [.059 in] thick PCB motherboards in SFP+ Stacked / Belly-to-Belly configurations. Hardware engineers can populate 1x6 cages on both top and bottom sides of a shared circuit board, maximizing aggregated signal bandwidth without exceeding standard 1RU height envelopes.
Conductive Elastomeric EMI Gasket Shielding Design
Operating six adjacent ports at high-frequency 16 Gb/s serial rates requires reliable electromagnetic compatibility (EMC) design to control radiated emissions and prevent inter-port crosstalk.
Seamless Elastomeric Panel Grounding Across 6 Ports
The TE Connectivity 2007170-1 utilizes a conductive elastomeric EMI gasket fitted around the outer perimeter of all six port openings. When compressed against the chassis front panel bezel, the flexible elastomeric material forms a gapless 360-degree ground seal, minimizing RF leakage at high frequencies while providing environmental dust protection.
Corrosion-Resistant Nickel Silver Construction
Formed from high-conductivity nickel silver, the cage housing delivers excellent structural stiffness, high resistance to physical wear, and mechanical stability across an extended temperature range of -55°C to +105°C. This ensures long-term grounding integrity, supporting system-level EMC design requirements for equipment targeting FCC and CE regulatory environments.
Press-Fit SFP+ Cage Features and PCB Assembly Integration
Engineered for automated, high-reliability solderless PCB manufacturing, the 2007170-1 utilizes precision compliant press-fit pin technology.
Solderless Compliant Pin Press-Fit Termination
The cage mounts mechanically into plated through-holes (PTH) on the host PCB using controlled press-fit insertion force. This solderless Through-Hole Technology (THT) eliminates wave soldering operations, protecting high-speed differential signal traces and surface-mount components from thermal reflow stress while enabling straightforward board repairability.
Target Applications: Enterprise Storage, Data Center Switches, and Telecom
Combining SFP+ MSA compliance, 1x6 hex-port density, and elastomeric EMI shielding, the TE Connectivity 2007170-1 supports critical high-speed networking systems:
- Enterprise Storage Area Networks (SAN): Ideal for high-density 16G Fibre Channel director switches, SAN controllers, and high-port-count storage disk arrays.
- Data Center Switching & Routers: Deployed in 10GbE Top-of-Rack (ToR) switches, aggregation routers, and belly-to-belly motherboard line cards.
- Telecom Transport Infrastructure: Suitable for 10G CPRI/eCPRI base station units (BBU), optical transport equipment (OTN), and outdoor edge enclosures.
How to Select and Verify an SFP+ Cage Assembly Replacement
When evaluating or sourcing 1x6 ganged SFP+ hex-port cage assemblies for new line card designs or supply chain diversification, hardware engineers should verify the following core parameters:
- Port Matrix Configuration (1x6 Hex-Port): Confirm that a 1x6 single-row ganged footprint aligns with your front-panel I/O port density targets and PCB trace routing space.
- EMI Shielding Mechanism (Elastomeric Gasket vs External Springs): Confirm whether your chassis bezel cutout design is optimized for conductive elastomeric gaskets (providing continuous gapless grounding across 6 ports) or metallic spring fingers.
- Belly-to-Belly Topology Compatibility: Verify that the cage mechanical pin layout supports dual-sided PCB mounting if deploying belly-to-belly line card architectures.
- Recommended PCB Board Thickness: Ensure the 2.05mm tail length matches your target motherboard thickness (TE 2007170-1 is optimized for standard 1.5mm PCBs).
- Mechanical Drawing Verification: Check elastomeric gasket compression dimensions, press-fit hole layouts, and pin locations against official engineering drawings when qualifying alternative suppliers.
Frequently Asked Questions
What is TE Connectivity 2007170-1?
TE Connectivity 2007170-1 is a 1x6 ganged (6-port side-by-side) SFP+ cage assembly featuring a conductive elastomeric EMI gasket. It supports 10GbE and 16G Fibre Channel optical transceivers in high-density data center switches, SAN arrays, and belly-to-belly line cards.
What are the advantages of a 1x6 ganged SFP+ cage over 1x2 or 1x4 cages?
A 1x6 ganged cage consolidates six SFP+ ports into a single integrated housing. This significantly reduces automated SMT/Press-Fit board assembly insertion cycles, ensures uniform 6-port front-panel pitch, and simplifies panel bezel grounding compared to multiple discrete cages.
What does 'Belly-to-Belly' application mean for TE 2007170-1?
Belly-to-belly application means the cage design allows mounting on both top and bottom surfaces of a shared PCB motherboard. This effectively doubles port density per line card slot (e.g., 12 ports per slot using 1x6 cages on both sides) within standard 1RU height constraints.
What PCB thickness is recommended for TE 2007170-1?
TE Connectivity 2007170-1 is optimized for a recommended PCB thickness of 1.5mm [.059 in]. Its 2.05mm press-fit tails ensure proper mechanical pin compliance and electrical contact retention in standard motherboard substrates.
What are the key mechanical features of TE Connectivity 2007170-1?
Key features include a 1x6 ganged 6-port layout, a conductive elastomeric EMI gasket, solderless press-fit pin termination, belly-to-belly mounting capability, and nickel silver construction rated from -55°C to +105°C.
Are compatible replacement options available for TE Connectivity 2007170-1?
Compatible replacement options may be available from qualified manufacturers. Hardware engineers should verify mechanical drawings, elastomeric gasket compression dimensions, press-fit hole layouts, and EMI requirements before final integration or secondary-source qualification.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































