HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 2110487-1 QSFP+ Cage(1710490260943).jpg

TE 2110487-1 Compatible LINK-PP LP11DC01000 QSFP 1x1 Cage With Internal/External EMI Springs

P/N:

LP11DC01000

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

TE

Compatible P/N:

2110487-1

  • Compatible Brands: TE
  • Product Type: Cage
  • EMI Shielding: Internal/External EMI Springs
  • PCB Termination: Through Hole - Press-Fit
  • Operating Temperature (°C): -40-85
  • Number of Ports: 1x1
  • Connector Types: QSFP
  • P/N: LP11DC01000
  • Manufacturer: LINK-PP
  • Compatible Brand: TE
  • Competitor P/N: 2110487-1

Product Specifications

LINK-PP Part Number LP11DC01000 TE Part Number 2110487-1
Connector Style Cage Connector Type QSFP
Number of Positions - Mounting Type Through Hole, Right Angle
Termination Press-Fit Features EMI Shielded
Port Matrix Configuration 1x1 Ports Number of Ports 1
THICKNESS 0.25mm Operating Temperature Range -40 – 85°C
Cage Material COPPER ALLOY EMI Containment Feature Type Internal/External EMI Springs
Length (Inches/mm) 2.312/58.73 Width (Inches/mm) 0.821/20.85
Height (Inches/mm) 0.434/11.02    

TE Connectivity 2110487-1 Compatible LINK-PP LP11DC01000 QSFP 1x1 Cage with Internal/External EMI Springs Technical Overview

The LINK-PP LP11DC01000 (fully compatible replacement for TE Connectivity 2110487-1) is an industrial-grade 1x1 single-port QSFP cage assembly featuring dual internal and external EMI springs, copper alloy construction (0.25mm thickness), and solderless right-angle press-fit PCB mounting. Engineered for 40Gb/s Ethernet, Fibre Channel, and InfiniBand high-speed networking equipment, it provides 360-degree panel bezel EMI grounding, low transfer contact impedance, solder-free mechanical retention, and an operating temperature range of -40°C to +85°C for enterprise core routers, ToR switches, and storage arrays.

  • Mechanical Form Factor: Single-Port (1x1) Right-Angle QSFP Cage Assembly with dual-zone internal and external EMI spring fingers for continuous panel-to-cage grounding.
  • Signal Ecosystem Support: Engineered for multi-lane serial architectures compliant with SFF-8436, IEEE 802.3ba 40G Ethernet, and InfiniBand QDR/FDR specifications (up to 14 Gb/s per lane).
  • Board Mount Technology: Solderless Through-Hole Press-Fit termination avoiding reflow thermal degradation, optimized for standard motherboard substrates.
  • Alternative Sourcing Option: Direct 100% drop-in footprint alternative from LINK-PP to support multi-source procurement strategies and supply chain flexibility without PCB layout changes.

TE Connectivity 2110487-1 Compatible LINK-PP LP11DC01000 QSFP Cage Assembly Product Overview

LINK-PP LP11DC01000 is a 1x1 single-port QSFP cage assembly designed as a functional and footprint drop-in replacement for TE Connectivity 2110487-1. Featuring precision-stamped 0.25mm copper alloy sheet metal, dual-zone internal/external EMI spring fingers, and right-angle press-fit board mounting, this assembly ensures maximum electromagnetic interference (EMI) containment and mechanical reliability across an industrial operating temperature range of -40°C to +85°C.

Key Benefits of LINK-PP LP11DC01000 / TE 2110487-1 QSFP Cage Assembly

  • 360-Degree Dual-Zone EMI Containment: Features external spring fingers for continuous bezel contact and internal spring fingers that wipe against transceiver housings, delivering superior low transfer impedance and suppression of high-frequency radiated emissions.
  • High-Reliability Solderless Press-Fit Termination: Compliant press-fit pins allow mechanical insertion into plated through-holes (PTH), avoiding PCB reflow thermal stress and simplifying board-level reworkability.
  • 0.25mm Copper Alloy Structural Rigidity: Formed from high-tensile copper alloy sheet metal (0.25mm thickness) to maintain mechanical spring retention and structural envelope integrity across 100+ module mating cycles.
  • Industrial Operating Temperature Range: Rated from -40°C to +85°C, ensuring reliable mechanical pin pressure and stable signal integrity in harsh telecom edge enclosures and data center environments.
  • SFF-8436 MSA Specification Compliance: Fully compliant with standard QSFP mechanical envelope dimensions (58.73mm L x 20.85mm W x 11.02mm H) for seamless front-panel bezel integration.
  • Multi-Source Procurement Flexibility: Identical footprint allows seamless second-sourcing alongside TE Connectivity 2110487-1 for BOM cost reduction and supply chain resilience.

1x1 QSFP Architecture & Signal Integrity Compliance

Engineered in compliance with QSFP MSA (SFF-8436) mechanical specifications, the LINK-PP LP11DC01000 features a single-port 1x1 right-angle cage geometry designed to house standard 40G QSFP+ transceivers, active optical cables (AOC), and direct attach copper cables (DAC).

Internal and External EMI Spring Containment Mechanics

High-speed data transmission at 10 Gb/s to 14 Gb/s per channel generates harmonic radiated noise that requires rigorous chassis grounding. The LP11DC01000 incorporates dual-zone spring fingers:

  • External EMI Springs: Compress against the inner perimeter of the chassis front bezel cutout, creating a low-impedance ground loop between the cage frame and chassis ground.
  • Internal EMI Springs: Wipe against the zinc die-cast housing of inserted transceivers, establishing a short ground return path that prevents RF leakage from the insertion window.

Press-Fit Assembly Features & Structural Reliability

To support automated, high-reliability SMT assembly lines, the LP11DC01000 utilizes precision compliant press-fit pins for solderless board insertion.

Solderless Compliant Pin Board Integration

The compliant press-fit pin geometry allows mechanical insertion into plated through-holes on the motherboard. This solderless Through-Hole Technology (THT) avoids secondary solder reflow exposure, preventing thermal warping of multi-layer PCBs and eliminating solder fatigue under continuous vibration.

Target Applications: 40GbE Enterprise Switches, Routers, and SAN Storage

Combining SFF-8436 compliance, 1x1 single-port density, dual EMI spring shielding, and press-fit mounting, the LP11DC01000 / TE 2110487-1 supports diverse high-speed hardware platforms:

  • 40GbE ToR Switches & Core Routers: High-density I/O interfaces requiring reliable 360-degree front panel grounding and low insertion loss.
  • Storage Area Networks (SAN) & Host Bus Adapters: High-speed Fibre Channel and InfiniBand host bus adapters requiring industrial-temperature mechanical retention.
  • Telecom & Edge Compute Enclosures: Wireless baseband units and outdoor edge servers operating across severe -40°C to +85°C environments.

How to Select and Verify a QSFP Cage Assembly Replacement

Hardware design engineers evaluating the LINK-PP LP11DC01000 as a drop-in second-source replacement for TE Connectivity 2110487-1 should verify the following core parameters:

  • Bezel Grounding Mechanism: Confirm that your chassis front panel bezel cutout matches the external spring finger perimeter dimensions (20.85mm W x 11.02mm H).
  • PCB Land Pattern Alignment: Ensure press-fit plated through-hole diameters and pin pitch align with standard SFF-8436 right-angle board footprints.
  • Operating Temperature Requirements: Verify that the -40°C to +85°C industrial temperature envelope satisfies your system thermal spec.
  • Mechanical Tolerance Check: Review 3D STEP models and mechanical engineering drawings against host PCB component clearance rules.

Frequently Asked Questions

Is LINK-PP LP11DC01000 fully compatible with TE Connectivity 2110487-1?

Yes. LINK-PP LP11DC01000 is a 100% functional, mechanical, and footprint drop-in replacement for TE Connectivity 2110487-1. It matches the same 1x1 QSFP port configuration, 0.25mm copper alloy material, right-angle press-fit pin pattern, and dual internal/external EMI spring features.

What is the function of internal and external EMI springs on the LP11DC01000?

External EMI springs compress against the chassis front bezel cutout to establish a 360-degree continuous chassis ground loop. Internal EMI springs wipe against the die-cast housing of inserted QSFP optical modules to suppress high-frequency electromagnetic leakage.

Does the LP11DC01000 require soldering during PCB assembly?

No. The LP11DC01000 utilizes compliant press-fit pins for Through-Hole Technology (THT) insertion. It is mechanically pressed into plated through-holes on the PCB without reflow soldering.

What data rates and standards are supported by this 1x1 QSFP cage?

The cage supports data rates up to 14 Gbps per channel across 4 high-speed lanes, delivering aggregate throughputs compliant with SFF-8436, 40G Ethernet (IEEE 802.3ba), and InfiniBand QDR/FDR standards.

What is the operating temperature range for LP11DC01000?

The LP11DC01000 is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned edge deployment environments.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Download