2-2170705-9 ZQSFP+ Cage with Heat Sink Connector TE Pluggable Connectors
P/N:
2-2170705-9
Manufacturer:
LINK-PP
Compatible Brand:
TE
Compatible P/N:
2-2170705-9
- Compatible Brands: TE
- Product Type: Cage Assembly
- Data Rate (Gb/s): 28
- EMI Shielding: Internal/External EMI Springs
- Lightpipe Options: With Lightpipe
- PCB Termination: Through Hole - Press-Fit
- Operating Temperature (°C): -40-85
- Connector Types: zQSFP+
- P/N: 2-2170705-9
- Manufacturer: LINK-PP
- Compatible Brand: TE
- Competitor P/N: 2-2170705-9
Product Specifications
| Part Number | 2-2170705-9 | Part Status | Active |
| Connector Style | Cage with Heat Sink | Connector Type | ZQSFP+ |
| Cage Type | Single | Mounting Type | Through Hole, Right Angle |
| Pluggable I/O Product Type | Cage Assembly | Thermal Accessory Type Included | Heat Sink |
| Termination | Press-Fit | Features | EMI Shielded |
| Port Matrix Configuration | 1x1 Ports | Number of Ports | 1 |
| Number of Rear EONs per Port Column | 1 | Connector Mounting Type | Board Mount |
| Data Rate (Max)(Gb/s) | 28 | Cage Material | Nickel Silver |
| Heat Sink Style | Pin | Heat Sink Height | 13.5mm[.531in] |
| Operating Temperature Range | -40 – 85°C | Pluggable I/O Applications | SFP+ Stacked Belly-to-Belly |
| Circuit Application | Signal | EMI Containment Feature Type | Internal/External EMI Springs |
| Included Lightpipe | Yes | Tail Length | 2.05mm[.081in] |
| PCB Thickness (Recommended) | 1.57mm[.062in] |
zQSFP+ 1x1 Cage Assembly with Heat Sink & Lightpipe
The TE Connectivity 2-2170705-9, identified in manufacturer documentation under base part number 2-2170705-9, is a single-port 1×1 zQSFP+ / QSFP28 pluggable I/O cage assembly designed for high-speed networking and telecommunications hardware. As a mechanical, thermal, and optical support interface for QSFP28 transceivers and copper cable assemblies, the component supports data rates up to 28 Gb/s. It is constructed from stamped nickel silver alloy with compliant pin press-fit termination, internal and external EMI springs, an integrated lightpipe, and an included 13.5 mm pin-style heat sink.
Engineered for board-mount applications with a 1×1 port matrix, the cage features a 2.05 mm tail length optimized for a 1.57 mm [.062 in] recommended PCB thickness and operates across a temperature range of -40°C to +85°C. The 2-2170705-9 serves as an industry-standard mechanical interface component in system designs such as 100G Ethernet switches, high-speed routers, server network adapters, and enterprise storage platforms.
Engineering Reference and Compatibility Considerations
The TE Connectivity 2-2170705-9 is widely deployed across telecommunications and enterprise networking platforms. When hardware engineering and sourcing teams evaluate alternative cage assemblies or second-source options for this footprint, several critical mechanical and physical parameters must be verified against official documentation:
- Port Matrix and Outer Envelope: Ensure the 1×1 port matrix and overall physical cage dimensions match the front-panel bezel and surrounding board-edge layout.
- Press-Fit Pin Pattern and Drill Schedule: Verify compliant pin locations, tail lengths (2.05 mm), recommended board thickness (1.57 mm), and plated-through-hole (PTH) drill diameters against manufacturer drawings.
- Heat Sink Profile and Retention: Confirm that the 13.5 mm pin-style heat sink height, retention clip mechanism, and vertical headroom align with system enclosure clearance and airflow requirements.
- EMI Spring Configuration: Check internal and external EMI spring geometries to confirm consistent contact with both the inserted module and the front-panel cutout.
- Lightpipe Placement: Verify lightpipe entry and exit coordinates relative to host board status LEDs and front bezel display windows.
- Transceiver Insertion Clearance: Confirm that internal stop depths, latch points, and module mechanical clearances comply with QSFP28 MSA physical specifications.
Engineering teams must cross-reference official manufacturer drawings and mechanical tolerance specifications before approving any second-source or alternative cage component.
Procurement and OEM Qualification
For sourcing teams and OEM hardware programs qualifying the 2-2170705-9 or reviewing manufacturing readiness, key qualification parameters center on mechanical accuracy, assembly compatibility, and thermal management:
Qualification requires review of the official customer drawing to confirm PCB drill hole tolerances, copper plating requirements, and press-fit pin seating specifications. Manufacturing lines must evaluate press-fit assembly capability and verify that appropriate press-fit seating tooling is available to apply insertion force without deforming the cage structure. OEM programs should also evaluate physical engineering samples to verify lightpipe optical alignment with host board LEDs, check EMI spring engagement against the chassis bezel, review thermal dissipation performance under system airflow, and establish volume delivery schedules for AVL qualification and production planning.
Single-Port 1x1 Cage Topology and Board Integration
Deploying a single-port zQSFP+ cage with an integrated pin-style heat sink provides specific mechanical and layout characteristics for high-bandwidth board designs:
- 1×1 Modular Board Placement: Allows flexible single-port placement along the board edge on PCIe expansion cards, network adapters, or edge controllers where ganged multi-port cages cannot be physically routed.
- 13.5 mm Pin-Style Heat Sink: The included 13.5 mm (.531 in) pin-style heat sink provides convective surface area to support heat dissipation from installed QSFP28 transceivers under system airflow.
- -40°C to +85°C Operating Temperature Range: The specified operating temperature range defines the verified environmental bounds of the cage assembly and its mechanical springs.
- Integrated Lightpipe Assembly: A built-in optical lightpipe routes indicator light from LEDs on the host PCB toward the front panel, eliminating the need for a separate light guide assembly.
- Press-Fit Board Termination: Compliant press-fit pins with a 2.05 mm tail length provide solderless mechanical and electrical connection to 1.57 mm recommended thickness boards.
Thermal Management, EMI Containment, and Lightpipe Integration
The 2-2170705-9 is designed to provide the physical, thermal, shielding, and optical interface structure for pluggable QSFP28 ports supporting data rates up to 28 Gb/s:
The cage body is stamped from nickel silver alloy, providing structural rigidity and shielding. To support EMI containment at the equipment front panel, the assembly incorporates internal and external EMI springs. The external springs establish electrical grounding contact between the cage and the chassis or bezel cutout, while the internal springs maintain grounding contact around the perimeter of the inserted pluggable optical module.
Thermal management is supported by a 13.5 mm pin-style heat sink held by a retention clip over the cage, transferring heat from the transceiver top surface into the system airflow stream. Heat sink clearance and airflow requirements should be verified against system thermal models. The integrated lightpipe assembly routes indicator light from LEDs on the host PCB toward the front panel, maintaining port link and activity visibility.
Mechanical Envelope and PCB Layout Considerations
When incorporating the 2-2170705-9 into host hardware layouts, engineering teams should observe the following structural and assembly parameters:
1. Package Dimensions and Enclosure Headroom
The 1×1 cage requires a standardized rectangular front-panel opening sized to allow deflection of the external EMI springs. Enclosure designers should confirm that vertical headroom inside the chassis accommodates the 13.5 mm heat sink profile under system airflow.
2. Press-Fit Compliant Pin Layout and PCB Drill Tolerances
The assembly utilizes press-fit compliant tails with a 2.05 mm (.081 in) length designed for 1.57 mm [.062 in] recommended PCB thickness. Plated-through-hole (PTH) drill diameters, copper plating thickness, and finished hole sizes must adhere strictly to the TE product drawing to ensure proper retention force without damaging internal board layers.
3. Heat Sink Airflow Path and Thermal Design
The assembly features a dedicated 13.5 mm pin-style heat sink held by a retention clip. System airflow should be directed across the pin array to maintain transceiver operating temperatures within manufacturer specifications.
4. Integrated Lightpipe and Host PCB LED Placement
The integrated lightpipe terminates directly above the port opening on the front bezel. Host PCB layout designers should position surface-mount indicator LEDs directly under the lightpipe entry points to ensure clear optical transmission. Appropriate press-fit seating tooling must be utilized during assembly.
Design Consideration Comparison: Single-Port zQSFP+ Cage vs. Alternative Configurations
| Design Consideration | 2-2170705-9 Single-Port 1×1 zQSFP+ Cage |
Ganged 1×N zQSFP+ Cage Assembly |
Stacked 2×N zQSFP+ Cage Assembly |
|---|---|---|---|
| Port Count & Matrix | 1×1 (Single Port) | Ganged 1×N (Single-row multi-port) | Stacked 2×N (Dual-row multi-port) |
| PCB Placement Flexibility | Modular; independent placement along board edge | Fixed multi-port block | Fixed multi-port block |
| Front-Panel Cutout | Single-port cutout opening | Continuous multi-port bezel opening | Dual-row rectangular opening |
| PCB Routing Channels | Direct breakout routing around cage perimeter | Concentrated routing between adjacent ports | Multi-layer breakout routing beneath upper/lower ports |
| Thermal Management Configuration | Included 13.5 mm pin-style heat sink | Configuration-dependent (individual or ganged heat sinks) | Configuration-dependent (integrated dual-height or ducting) |
| EMI Containment Feature | Internal and external EMI springs | Configuration-dependent (springs or elastomeric gasket) | Configuration-dependent (springs or elastomeric gasket) |
| PCB Insertion Tooling | Single 1×1 press-fit cycle | Multi-port press-fit tooling | Dual-row high-force press-fit tooling |
| Primary Design Focus | Modular single-port I/O & dedicated thermal relief | High-density horizontal faceplate layout | Maximum vertical port density |
Application Considerations for 2-2170705-9
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| 100G Ethernet Switching & Routing Platforms | Provides a modular 1×1 cage interface supporting platform designs using QSFP28 pluggable transceivers and cables up to 28 Gb/s. |
| Network Interface Cards (NICs) & Host Bus Adapters | Modular 1×1 footprint enables single-port QSFP28 I/O on expansion cards where space permits a 13.5 mm heat sink. |
| Enterprise Storage & SAN Equipment | Internal and external EMI springs assist with port-level shielding containment across equipment faceplates. |
| High-Performance Computing (HPC) Interconnect Systems | Supports platform designs utilizing QSFP28 interfaces across an operating temperature range of -40°C to +85°C. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing procurement orders for the 2-2170705-9, hardware engineers should confirm the following technical parameters:
- Plated Hole Drill Schedule: Verify recommended drill sizes, finished plated-through-hole diameters, and plating thicknesses against the official TE product drawing.
- Board Thickness Compliance: Confirm host PCB thickness aligns with the recommended 1.57 mm [.062 in] dimension for 2.05 mm press-fit pin tails.
- Bezel Cutout & EMI Spring Deflection: Check front-panel sheet metal cutout dimensions to ensure proper contact and compression of internal and external EMI springs.
- Heat Sink Vertical Clearance: Verify enclosure headroom to accommodate the 13.5 mm pin heat sink and ensure unobstructed system airflow.
- Lightpipe Optical Alignment: Check host PCB layout to ensure surface-mount indicator LEDs align accurately with the lightpipe ingress locations.
- Press-Fit Tooling Selection: Ensure the manufacturing line uses appropriate press-fit seating tooling to apply uniform force and prevent cage damage during insertion.
Frequently Asked Questions
What are the primary specifications of the TE 2-2170705-9 cage assembly?
The TE Connectivity 2-2170705-9, also identified by TE as 2-2170705-9, is a single-port 1×1 QSFP28 cage assembly for pluggable I/O applications. It supports a maximum data rate of 28 Gb/s, uses through-hole press-fit PCB termination, and includes a 13.5 mm pin-style heat sink and integrated lightpipe. The cage is made of nickel silver and includes internal and external EMI springs. The recommended PCB thickness is 1.57 mm, with an operating temperature range of -40°C to +85°C.
Is TE 2-2170705-9 the same part as TE 2-2170705-9?
TE Connectivity documentation identifies the full part number as 2-2170705-9, while 2-2170705-9 is also commonly used as the base part-number reference. Both references correspond to the same TE QSFP28 1×1 cage assembly configuration. When purchasing or qualifying the component, engineering and procurement teams should use the exact part-number format shown on the applicable TE product documentation and purchasing record.
What type of heat sink is included with the TE 2-2170705-9?
The TE 2-2170705-9 includes a 13.5 mm (.531 in) pin-style heat sink. The heat sink is supplied as part of the cage assembly and is intended to provide a thermal interface for the installed QSFP28 transceiver. Its height, retention method, and surrounding mechanical clearance should be checked against the host system enclosure and airflow design.
What EMI shielding features are included in the TE 2-2170705-9 cage?
The TE 2-2170705-9 incorporates internal and external EMI springs. The external springs provide electrical contact between the cage and the host chassis or panel, while the internal springs provide contact around the inserted pluggable module. These features help maintain EMI containment at the QSFP28 port and should be evaluated together with the host PCB, bezel, chassis grounding, and system-level shielding design.
What PCB thickness and termination method does TE 2-2170705-9 require?
The TE 2-2170705-9 uses through-hole press-fit termination for PCB mounting. TE specifies a recommended PCB thickness of 1.57 mm (.062 in) and a termination tail length of 2.05 mm (.081 in). The host PCB footprint and plated-through-hole dimensions should be verified against the latest TE product drawing before production tooling or board release.
How does the integrated lightpipe work with the host PCB?
The TE 2-2170705-9 includes an integrated lightpipe that routes indicator light from LEDs on the host PCB toward the front panel. This allows link, activity, or other port-status indicators to remain visible when the QSFP28 transceiver is installed behind the cage and front bezel.
What QSFP28 transceivers can be used with the TE 2-2170705-9 cage?
The TE 2-2170705-9 is designed for QSFP28 MSA-compatible pluggable transceivers and QSFP28 cable assemblies. The cage provides the mechanical enclosure, EMI containment, thermal interface, and optical indication structure; transceiver selection must still be matched to the host system's electrical interface, optical requirements, thermal design, and applicable QSFP28 implementation.
What PCB press-fit and drill requirements should engineers verify before production?
Engineers must verify the finished plated-through-hole (PTH) diameters, drill sizes, and copper plating thicknesses specified in the official TE product drawing for 2-2170705-9. The cage uses compliant press-fit pins with a 2.05 mm tail length optimized for 1.57 mm nominal board thickness. Proper hole tolerances and the use of appropriate press-fit seating tooling are critical to ensure reliable retention and avoid damage to internal PCB traces.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































