TE 2057042-6 QSFP+ 1x3 Cage Assembly with Heat Sink Included Lightpipe 14 Gb/s
P/N:
2057042-6
Manufacturer:
LINK-PP
Compatible Brand:
TE
Compatible P/N:
2057042-6
- Compatible Brands: TE
- Product Type: Cage Assembly
- Lightpipe Options: With Lightpipe
- PCB Termination: Through Hole - Press-Fit
- Operating Temperature (°C): -55-105
- Number of Ports: 1xN
- Connector Types: QSFP+,QSFP
- P/N: 2057042-6
- Manufacturer: LINK-PP
- Compatible Brand: TE
- Competitor P/N: 2057042-6
Product Specifications
| Part Number | 2057042-6 | Part Status | Active |
| Connector Style | Cage, Ganged (1 × 3) with Heat Sink | Connector Type | QSFP+ / QSFP |
| Port Matrix Configuration | 1×3 Ports | Number of Ports | 3 |
| Mounting Type | Through Hole, Right Angle | Termination | Press-Fit (Compliant Pin) |
| Data Rate (Max) | 14 Gb/s per Channel | Features | EMI Shielded |
| Included Lightpipe | Yes (Integrated Assembly) | EMI Containment Feature Type | Customer Applied Gasket |
| Heat Sink Height | 4.2 mm [.165 in] (PCI Height) | Heat Sink Style | Pin Fin |
| Cage Material | Nickel Silver | Circuit Application | Signal |
| Operating Temperature Range | -55°C to +105°C | Tail Length | 2.2 mm [.086 in] |
| PCB Thickness (Recommended) | 1.45 mm [.057 in] | Rear EONs per Port Column | 1 |
QSFP+ 1x3 Cage Assembly with Heat Sink & Lightpipe
The TE 2057042-6 is an industrial-grade 1×3 ganged QSFP/QSFP+ optical and copper cage assembly designed for high-density, high-speed board-edge interconnects up to 14 Gb/s per channel. Fabricated from robust nickel silver alloy with press-fit compliant pin terminations, integrated 4.2 mm pin fin heat sinks, and pre-installed lightpipes, the assembly supports multi-channel signal transmission across an extended operating temperature range of -55°C to +105°C.
The mechanical structure incorporates a 1-row by 3-port matrix, customer-applied gasket EMI containment, and a 2.2 mm tail length optimized for 1.45 mm minimum PCB thicknesses. Delivering reliable mechanical retention and thermal dissipation within a low 4.2 mm heat sink profile, the 2057042-6 provides a standardized cage interface suited for top-of-rack switches, enterprise routers, PCIe host bus adapters (HBAs), and high-performance computing clusters.
Compatibility and Design Positioning
The 2057042-6 is positioned as a cross-reference and alternative sourcing option for the TE Connectivity 2057042-6 1×3 QSFP+ ganged cage assembly. The two assemblies share key mechanical and physical characteristics including a 1×3 ganged port matrix, press-fit through-hole termination, integrated 4.2 mm pin fin heat sinks, included lightpipe assemblies, nickel silver alloy construction, and an operating temperature range of -55°C to +105°C. Engineering teams should verify PCB footprint drill patterns, press-fit pin dimensions, front-panel bezel cutouts, and thermal clearance tolerances against the applicable official drawings before approving component substitution.
Procurement and OEM Qualification
For sourcing teams and OEM engineering programs evaluating the 2057042-6 as a second-source or BOM alternative, key qualification parameters include PCB press-fit drill geometry, insertion and retention force limits, lightpipe optical alignment, thermal dissipation performance under airflow, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.
Ganged 1x3 Cage Topology and Front-Panel High-Density Optimization
Consolidating three QSFP+ ports into a single ganged cage assembly delivers significant layout and thermal packaging advantages for high-bandwidth networking hardware:
- 1×3 Port Matrix Consolidation: Accommodates three independent QSFP/QSFP+ optical transceivers or direct attach copper (DAC) cables within a unified housing, optimizing front-panel space compared to placing three discrete 1×1 cages.
- 4.2 mm Pin Fin Heat Sink: The 4.2 mm (.165 in) PCI-height pin fin heat sink provides effective convective cooling for 40GbE and 14 Gb/s FDR transceivers while complying with standard PCIe card profile constraints.
- -55°C to +105°C Extended Operating Range: The wide operating temperature envelope ensures mechanical spring resilience, structural stability, and contact reliability in demanding enterprise data centers and unconditioned industrial environments.
- Integrated Lightpipe Assembly: Built-in optical lightpipes channel visual port status and activity indicators from PCB-mounted surface-mount LEDs to the front panel, eliminating separate lightpipe assemblies.
- Press-Fit Board Retention: Compliant press-fit pins with a 2.2 mm tail length provide gas-tight, solderless mechanical anchoring into 1.45 mm (.057 in) nominal PCB substrates, simplifying multi-layer board manufacturing.
Thermal Dissipation, EMI Shielding, and Signal Integrity
The 2057042-6 is engineered to manage the strict thermal and electromagnetic challenges of high-speed multi-gigabit interfaces:
The cage body is stamped from high-grade nickel silver, offering natural corrosion resistance, mechanical strength, and high-frequency shielding effectiveness. To ensure robust containment of radiated emissions at 14 Gb/s signaling rates, the front perimeter is designed for integration with customer-applied conductive or elastomeric gaskets that compress firmly against the equipment chassis bezel.
Thermal management is supported by individual pin fin heat sinks secured by spring clips over each port cavity. This configuration ensures consistent downward mechanical pressure onto inserted transceivers, maximizing thermal conduction from the transceiver top surface into the heat sink pin matrix under system airflow.
Mechanical Envelope and PCB Layout Considerations
When integrating the 2057042-6 into high-speed line card designs, engineering teams should observe the following structural and manufacturing guidelines:
1. Package Dimensions and Front-Panel Bezel Cutout
The 1×3 ganged cage requires a continuous rectangular front-panel opening engineered to provide uniform compression on customer-applied EMI gaskets. Enclosure designers should confirm vertical clearance above the cage to accommodate the 4.2 mm heat sink profile under forced airflow.
2. Press-Fit Compliant Pin Layout and PCB Drill Tolerances
The assembly utilizes press-fit compliant tails with a 2.2 mm (.086 in) length designed for 1.45 mm [.057 in] minimum PCB thickness. Plated through-hole (PTH) diameters, copper plating thickness, and drill tolerances must adhere to official manufacturing drawings to guarantee proper insertion force and contact resistance.
3. Heat Sink Pin Fin Clamping and Airflow Path
Each port features a dedicated pin fin heat sink held by a retention clip. System airflow should be directed longitudinally along the card surface through the heat sink array to maintain transceiver operating temperatures within manufacturer specifications.
4. Lightpipe Alignment and Host PCB LED Placement
The integrated lightpipes terminate directly above the transceiver port openings. Host board layout designers should place reverse-mount or top-firing surface-mount LEDs precisely under the lightpipe entry points to maximize light transmission efficiency.
Design Consideration Comparison: Ganged 1x3 Cage vs. Alternative Cage Topologies
| Design Consideration | 2057042-6 Ganged 1×3 QSFP+ Cage |
3× Individual Single-Port (1×1) QSFP+ Cages |
Stacked 2×3 QSFP+ Cage Assembly |
|---|---|---|---|
| Port Density & Matrix | Ganged single-row 1×3 matrix (3 ports) | Three separate single-port cages | Dual-row stacked matrix (6 ports) |
| PCB Assembly Operations | Single press-fit insertion cycle | Three independent press-fit insertion cycles | Single high-force press-fit cycle |
| Front-Panel Cutout Design | Single continuous 1×3 bezel cutout | Three individual cutouts with web spacing | Tall dual-row rectangular opening |
| Integrated Thermal Management | Pre-installed 4.2 mm pin fin heat sinks | Requires separate heat sinks per cage | Dual-height heat sinks or integrated airflow |
| Card Profile Compatibility | Standard 1U and PCIe bracket compatible | Standard 1U and PCIe bracket compatible | Requires 2U or full-height custom chassis |
| Primary Engineering Focus | High-density 1U single-row port aggregation | Dispersed or modular port placement | Maximum vertical port density |
Application Considerations for 2057042-6
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Top-of-Rack (ToR) Switches & Aggregation | Consolidates three 40GbE or FDR InfiniBand ports in a unified single-row front-panel layout. |
| Enterprise Storage Arrays & SAN Directors | Customer-applied gasket design supports EMI containment across high-density storage controller bezels. |
| PCIe Host Bus Adapters (HBA) & SmartNICs | Low 4.2 mm pin fin heat sink satisfies PCIe bracket height restrictions while providing thermal dissipation. |
| High-Performance Computing (HPC) Clusters | -55°C to +105°C operating range maintains mechanical spring integrity under extreme thermal operating cycles. |
Engineering Verification Checklist
Before releasing a board layout or finalizing procurement orders for the 2057042-6, hardware engineers should confirm the following technical parameters:
- Plated Hole Drill Schedule: Verify that finished hole diameters, drill sizes, and copper plating thicknesses match the press-fit specification on the official TE 2057042-6 drawing.
- PCB Thickness Verification: Ensure host PCB nominal thickness meets or exceeds the recommended 1.45 mm (.057 in) dimension for proper 2.2 mm pin tail retention.
- Bezel Cutout and Gasket Tolerances: Confirm front-panel sheet metal cutout dimensions to ensure uniform compression of customer-applied EMI gaskets.
- Lightpipe LED Alignment: Verify SMT LED placement coordinates on the host PCB layer to ensure optical alignment with the lightpipe ingress ports.
- Press-Fit Seating Tooling: Confirm that manufacturing assembly lines possess suitable flat-rock or custom press-fit connector seating tools to avoid cage deformation during installation.
- Thermal Airflow Direction: Confirm chassis airflow direction runs parallel to the heat sink pin rows to ensure optimal forced convection cooling for inserted transceivers.
Frequently Asked Questions
What are the primary specifications of the TE 2057042-6 cage assembly?
The TE 2057042-6 is a 1×3 ganged QSFP/QSFP+ cage assembly designed for data rates up to 14 Gb/s per channel. It features press-fit through-hole mounting, nickel silver alloy construction, pre-installed 4.2 mm pin fin heat sinks, integrated lightpipe assemblies, customer-applied gasket EMI shielding, and an operating temperature range of -55°C to +105°C.
Is the TE 2057042-6 compatible with the TE Connectivity 2057042-6?
The LINK-PP 2057042-6 is positioned as a cross-reference and alternative sourcing option for the TE Connectivity 2057042-6. Both assemblies share matching 1×3 ganged port footprints, press-fit compliant pin configurations, 4.2 mm pin heat sink styles, lightpipe integration, and mechanical envelopes. Engineering teams should cross-reference official product drawings before volume changeovers.
What is the function of the included 4.2 mm pin fin heat sink?
The included 4.2 mm (.165 in) pin fin heat sink is mounted via a spring clip to apply downward pressure on inserted optical transceivers. It conducts heat away from the transceiver casing and dissipates it into the chassis airflow path while remaining within low-profile PCIe card height constraints.
What PCB thickness and termination method are required for this cage?
The 2057042-6 utilizes compliant press-fit pins with a 2.2 mm (.086 in) tail length, designed for solderless installation into plated through-holes on PCBs with a recommended thickness of 1.45 mm (.057 in) or greater.
How does the customer-applied gasket provide EMI containment?
The front perimeter of the cage assembly is designed to interface with customer-applied conductive elastomeric or metal gaskets. When the board is installed in an enclosure, the gasket compresses against the chassis bezel, establishing a 360-degree conductive seal that prevents electromagnetic emissions at 14 Gb/s frequencies.
How do the integrated lightpipes function with host board LEDs?
The pre-installed clear optical lightpipes extend from the rear of the cage over the port cavities to the front bezel. They capture light emitted by surface-mount LEDs placed on the host PCB and guide it to the front panel to provide visible port link and activity status.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































