HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP72488ANL.jpg
  • LP72488ANL (2).jpg

LP72488ANL 2.5G Base -T 24 Pin Single Port SMD Transformer Magnetic Modules

P/N:

LP72488ANL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LP72488ANL

  • Compatible Brands: LINK-PP
  • Data Rate: 2.5G BASE-T
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: -40℃ TO +85°C
  • Application -LAN: ETHERNET(Non PoE)
  • P/N: LP72488ANL
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LP72488ANL

Product Specifications

LINK-PP Part Number LP72488ANL Transformer Type Lan Transformer
Part Status Active Turns Ratio - Primary: Secondary 1:1 Transmitter, 1:1 Receiver
Construction OPEN FRAME Application-Lan Ethernet(Non-PoE)
Number of Ports Single Port Speed 2.5G Base-T
Package Tape & Reel Cores per Port 8
AutomDX Yes Comment SAME AS NL VERSION
PIN Number 24 Mounting Type Surface Mount
Package Height (Inches/mm) 0.157/4.0 Package Length (Inches/mm) 0.594/15.10
Package Width (Inches/mm) 0.394/10.0 Temperature -40℃ TO +85℃
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C,S

2.5GBASE-T LAN Transformer

Product Engineering Overview

The LINK-PP LP72488ANL is a 2.5GBASE-T discrete LAN transformer listed for Non-PoE Ethernet applications. Its surface mount configuration has a 24-terminal package and 1.00 mm terminal pitch. Evaluate it within the complete host assembly: the PHY interface, PCB mounting pattern and adjacent component clearance must all fit the intended design.

Use the 2.5GBASE-T model designation when matching the magnetics to the PHY. The nominal turns ratio and terminal count alone do not establish 5GBASE-T or 10GBASE-T qualification.

Interface: 2.5GBASE-T
Power application: Non-PoE
Mounting: Surface Mount
Terminals: 24
Operating temperature: -40℃ TO +85℃
Drawing revision: Rev A

Design Positioning and Qualification

The LP72488ANL can be evaluated for existing 2.5GBASE-T designs using comparable mechanical and electrical requirements. No specific third-party replacement is established on this page. Qualify the actual host board rather than relying on a presumed standard footprint.

Electrical and Mechanical Integration

  • PHY connections: Compare signal pairs, polarity and center-tap connections with the host PHY reference circuit. The passive component does not implement network protocols.
  • PCB layout: Use the model-specific recommended footprint, pin-1 datum and clearances. Follow the manufacturer's copper keep-out and clearance requirements.
  • Assembly envelope: Check component height, land pattern, courtyard and assembly process against the applicable drawing. Package dimensions and PCB pad dimensions serve different purposes.
  • Power and environment: Non-PoE is the listed application. Confirm electrical limits and operating conditions within the complete host design.

Procurement and OEM Qualification

Use LP72488ANL and the agreed drawing revision on the sample request, BOM and purchase documentation. Evaluate samples on the target board, record electrical and assembly results, and complete the approved-vendor review before production release. Confirm quantities, packaging and the delivery schedule for the actual order rather than assuming lifecycle status establishes availability.

Engineering Verification Checklist

  1. Confirm the full part number and drawing revision.
  2. Review all signal pairs, center taps and host PHY connections.
  3. Verify the footprint, terminal numbering and pin-1 orientation.
  4. Check courtyard, assembly height and the specified mounting process.
  5. Confirm Non-PoE application requirements and the component operating range.
  6. Validate samples on the intended board and record the production approval.

Frequently Asked Questions

What is LP72488ANL used for?

The LINK-PP LP72488ANL is a 2.5GBASE-T discrete LAN transformer listed for Non-PoE Ethernet applications. Its surface mount configuration has a 24-terminal package and 1.00 mm terminal pitch.

Can LP72488ANL be treated as a 5G or 10G transformer because it has 24 terminals?

No. This catalog entry and its drawing identify a 2.5GBASE-T component. Select and qualify the magnetics for the required PHY data rate rather than extrapolating from package size or turns ratio.

Does LP72488ANL support Power over Ethernet (PoE)?

The supplied specification identifies LP72488ANL for Non-PoE Ethernet applications. Do not assign a PoE rating to it from the interface or package alone; a powered design requires a documented magnetic and power-path rating for the intended application.

Does LP72488ANL perform AutoMDX switching?

No. It is a passive magnetic component. The AutoMDX field refers to its use with an Ethernet interface supporting AutoMDX operation; pair detection and switching are functions of the host PHY.

What should be supplied when requesting LP72488ANL samples or a quotation?

Provide the complete part number, target quantity, host interface and required drawing revision. Confirm sample configuration, commercial terms and delivery schedule with LINK-PP; this page does not establish stock, MOQ or a fixed lead time.

Does the operating temperature rating qualify the complete host system?

No. The specification lists -40℃ TO +85℃ for this component. Check ambient conditions, assembly heating and the operating limits of the PHY, connector and surrounding electronics on the target equipment.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download