HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 96.jpg

LP79604PNL 2.5G Base-T High PoE++ Ethernet Transformer Quad Port Surface Mount Magnetics

P/N:

LP79604PNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LP79604PNL

  • Compatible Brands: LINK-PP
  • Data Rate: 2.5G BASE-T
  • Mounting Type: Surface Mount
  • Temperature: 0℃ TO +70℃
  • Application -LAN: PoE++
  • P/N: LP79604PNL
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LP79604PNL

Product Specifications

LINK-PP Part Number LP79604PNL Transformer Type LAN Transformer
Part Status Active Turns Ratio - Primary:Secondary 1:1 Transmitter, 1:1 Receiver
Construction Open Frame Application-LAN Ethernet (PoE++)
Number of Ports Quad Port Speed 2.5GBASE-T
Package Tape & Reel Cores per Port 32
AutoMDX Yes Comment Same as NL Version
PIN Number 96 Mounting Type Surface Mount
Package Height (Inches/mm) 0.650 / 16.50 Package Length (Inches/mm) 1.110 / 28.20
Package Width (Inches/mm) 1.138 / 28.90 Temperature 0°C to +70°C
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C, S

Quad-Port 2.5GBASE-T Surface-Mount Discrete LAN Transformer Module for PoE++ Applications

The LINK-PP LP79604PNL is a quad-port discrete 2.5GBASE-T LAN transformer module specified for multi-gigabit Ethernet systems with Power over Ethernet Plus Plus (PoE++) requirements. Built in a 96-pin surface-mount (SMD) open-frame construction, it consolidates four independent 2.5G magnetic channels into a single 28.20 mm by 28.90 mm board footprint.

Featuring a 1:1 transmitter and 1:1 receiver turns ratio (1CT:1CT, T, C, S configuration), the module provides physical-layer isolation and differential signal coupling across all 16 differential pairs (4 pairs per port). Specified for an operating temperature range of 0°C to +70°C and supplied in Tape & Reel packaging for automated SMT assembly, it is suited for multi-port enterprise switches, Wi-Fi 6/7 multi-gigabit access point hubs, high-power PoE midspans, and network security appliances.

Hardware designers should verify the mechanical land pattern, pin assignment, PCB copper trace geometries, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Interface: 2.5GBASE-T Multi-Gigabit
Port Density: Quad Port (4 Channels Consolidated)
Power Delivery: Ethernet (PoE++) Application
Package / Mounting: 96-Pin SMD (Open Frame)
Operating Temperature: 0°C to +70°C Commercial
Turns Ratio: 1CT:1CT (T, C, S)

Quad-Port 2.5GBASE-T Signal Transmission and PoE++ Power Integration

High-density multi-gigabit networking hardware requires magnetic assemblies that balance multi-channel high-speed differential signal coupling with high-power DC current delivery:

  • Quad-Channel Layout Consolidation: Consolidating four 2.5GBASE-T channels into a single physical component streamlines routing between multi-port Ethernet PHY transceivers and external RJ45 connectors, reducing board congestion and trace length disparities compared to using four separate single-port modules.
  • PoE++ Current Path Support: Specified for Ethernet PoE++ applications, the internal transformer center-tap terminations and pin paths are structured to carry DC power currents across the network cabling, supporting higher-power powered devices (PD) and power sourcing equipment (PSE).
  • Magnetic Stability: The magnetic structure is designed to maintain open-circuit inductance (OCL) and low-frequency baseline wander compensation under operational DC bias conditions across the 0°C to +70°C temperature range.

96-Pin SMD Open-Frame Packaging and High-Density Board Routing

Surface-mount quad-port magnetics introduce specific mechanical and manufacturing considerations for multi-layer networking boards:

1. 96-Pin Surface-Mount Footprint

The 96-pin SMD configuration provides dedicated solder pads for all differential data lines, center taps, and termination connections across the four ports. The 28.20 mm by 28.90 mm footprint with a 16.50 mm height allows efficient component placement on dense switch line cards.

2. Open-Frame Convective Thermal Management

The open-frame package allows ambient air to circulate directly around the internal magnetic toroids, assisting convective heat dissipation during simultaneous four-port 2.5G traffic and PoE++ power delivery.

3. Tape & Reel SMT Packaging

Supplied in Tape & Reel format, the LP79604PNL is compatible with automated high-speed pick-and-place equipment and standard surface-mount assembly workflows.

Discrete Transformer vs. Integrated MagJack Solutions

Selecting between a discrete LAN transformer and an integrated MagJack involves several hardware design trade-offs:

  • Layout and Placement Flexibility: Discrete transformers allow engineers to place the magnetics independently on the PCB, optimizing the physical separation between the host PHY and the board edge.
  • Connector Selection Freedom: A discrete transformer architecture allows the design to be paired with separate RJ45 connectors, including standard right-angle jacks, vertical top-entry connectors, multi-port ganged arrays, or specialized enclosure-specific interfaces.
  • Thermal Separation: Separating the transformer from the physical I/O connector helps distribute heat dissipation across the board rather than concentrating thermal load at the front-panel connector cavity.

Architecture Comparison: Quad-Port 2.5G PoE++ Transformer vs. Alternative Implementations

Evaluation Metric LP79604PNL
Quad-Port 2.5G PoE++ Transformer
4 x Single-Port
2.5G PoE+ Transformers
Quad-Port Integrated
2.5G MagJack
Channel Integration Quad Port (4 Channels Consolidated) Single channel per component Quad port integrated with RJ45
Ethernet Data Rate 2.5GBASE-T 2.5GBASE-T 2.5GBASE-T
PoE Classification Ethernet (PoE++) Application Typically PoE+ (Model-dependent) PoE+ or PoE++ (Model-dependent)
Mounting Technology Surface Mount (96-Pin SMD) Surface Mount (SMD) Through-Hole (THT)
I/O Connector Selection Independent (Can be paired with separate RJ45 connectors) Independent Fixed by connector assembly
Primary Advantage Consolidates four 2.5G PoE++ channels for SMT assembly Higher placement area required Single component for jack and magnetics

Application Considerations for LP79604PNL

Target Application Profile Mounting / Packaging Primary Engineering Consideration
Multi-Port 2.5G Enterprise Switches & Routers 96-Pin SMD / Tape & Reel Consolidates four 2.5GBASE-T channels; supports high-density multi-port front-end architectures.
Wi-Fi 6/6E/7 Multi-Gigabit Access Point Hubs 96-Pin SMD (Open Frame) 2.5G multi-gigabit throughput combined with PoE++ power feeding for high-performance wireless infrastructure.
High-Power PoE Network Security Appliances 96-Pin SMD Accommodates DC power currents across center taps; SMT assembly compatibility for automated production.
Multi-Port Embedded Carrier Boards & Gateways 96-Pin SMD Freedom to pair with specialized non-magnetic RJ45 connectors or enclosure-specific external ports.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LP79604PNL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Vertical Clearance: Verify the 16.50 mm height, 28.20 mm length, and 28.90 mm width against enclosure envelope limits.
  • PCB Land Pattern & Solder Mask: Check pad dimensions, pitch, and solder mask clearances for the 96-pin surface-mount footprint on the manufacturer's drawing.
  • PoE++ Trace Current Capacity: Ensure PCB copper trace widths connecting transformer center taps to PSE or PD power controllers are dimensioned for high-current PoE++ delivery.
  • Quad-PHY Differential Routing: Verify controlled-impedance differential trace routing, length matching, and isolation boundaries across all four 2.5G channels.
  • Thermal Operating Environment: Confirm ambient airflow and validate that the component operating environment remains within the specified 0°C to +70°C range.
  • SMT Process Compatibility: Verify Tape & Reel feeder setup and convection reflow profiles for the open-frame package.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LP79604PNL?

The LP79604PNL is a quad-port discrete LAN transformer module supporting 2.5GBASE-T Ethernet and PoE++ applications. It features a 96-pin surface-mount (SMD) open-frame package, 1CT:1CT turns ratio (T, C, S configuration), and an operating temperature range of 0°C to +70°C, supplied in Tape & Reel format.

What is the design advantage of a quad-port discrete 2.5G LAN transformer?

A quad-port discrete transformer consolidates four 2.5GBASE-T channels into a single 28.20 mm x 28.90 mm footprint. This reduces component placement count, streamlines PCB differential trace routing directly from multi-port PHY transceivers, and preserves board area compared to four separate single-port modules.

How does the LP79604PNL support PoE++ applications?

The LP79604PNL is specified for Ethernet PoE++ applications, incorporating internal transformer center-tap terminations structured to carry elevated DC power currents across the differential data pairs while maintaining 2.5GBASE-T signal isolation across the 0°C to +70°C operating range.

What are the advantages of using a discrete LAN transformer over an integrated MagJack?

A discrete LAN transformer allows hardware designers to place the magnetics independently on the PCB, optimizing thermal dissipation away from the I/O edge and enabling pairing with any separate RJ45 connector style, such as vertical top-entry, multi-port ganged, or ruggedized modular jacks.

Does the LP79604PNL support AutoMDX?

Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected Ethernet PHY interface and reference design guidelines before finalizing production layouts.

What is the operating temperature range for the LP79604PNL?

The LP79604PNL is rated for a commercial operating temperature range of 0°C to +70°C, suited for enterprise switches, multi-port routers, wireless access point controllers, and commercial networking equipment.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Product Drawing