LP72431ANL 10G Base -T 24 Pin Single Port SMD PoE++ Lan Transformer Modules
P/N:
LP72431ANL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LP72431ANL
- Compatible Brands: LINK-PP
- Data Rate: 10G BASE-T
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: PoE++
- P/N: LP72431ANL
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LP72431ANL
Packaging Details:
N.W/pCS:
0.002kg
Package:
Reel
SPQ:
750pcs
Qty/carton:
4500pcs
Carton size:
37*37*25cm
G.W/carton:
7kg
Product Specifications
| LINK-PP Part Number: | LP72431ANL | Transformer Type | Lan Transformer |
| Part Status | Active | Turns Ratio - Primary: Secondary | 1:1 Transmitter, 1:1 Receiver |
| Construction | OPEN FRAME | Application-Lan | Ethernet(PoE++) |
| Number of Ports | Single Port | Speed | 10G Base-T |
| Package | Tape & Reel | Cores per Port | 8 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN Number | 24 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.236/6.0 | Package Length (Inches/mm) | 0.715/18.15 |
| Package Width (Inches/mm) | 0.630/16.0 | Temperature | -40℃ TO +85℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
Product Engineering Overview
The LINK-PP LP72431ANL is a 10GBASE-T discrete LAN transformer listed for PoE++ Ethernet applications. Identify the full LP72431ANL part number and its drawing revision in an RFQ or sample request so that the evaluated component and ordered variant refer to the same configuration. Its surface mount configuration has a 24-terminal package and a four-pair schematic.
Review all four differential pairs and their center taps together. The drawing's PoE++ application notes do not replace qualification of the host PSE or PD, connector current path, cable configuration and thermal limits. Keep the approved sample, drawing and host-board review together when considering AVL admission or a production order.
Design Positioning and Qualification
The LP72431ANL can be evaluated for existing 10GBASE-T designs using comparable mechanical and electrical requirements. No specific third-party replacement is established on this page. Qualify the actual host board rather than relying on a presumed standard footprint.
Electrical and Mechanical Integration
- PHY connections: Compare signal pairs, polarity and center-tap connections with the host PHY reference circuit. The passive component does not implement network protocols.
- PCB layout: Use the model-specific recommended footprint, pin-1 datum and clearances. Follow the manufacturer's copper keep-out and clearance requirements.
- Assembly envelope: Check component height, land pattern, courtyard and assembly process against the applicable drawing. Package dimensions and PCB pad dimensions serve different purposes.
- Power and environment: PoE++ is the listed application. Confirm electrical limits and operating conditions within the complete host design.
Procurement and OEM Qualification
Use LP72431ANL and the agreed drawing revision on the sample request, BOM and purchase documentation. Evaluate samples on the target board, record electrical and assembly results, and complete the approved-vendor review before production release. Confirm quantities, packaging and the delivery schedule for the actual order rather than assuming lifecycle status establishes availability.
Engineering Verification Checklist
- Confirm the full part number and drawing revision.
- Review all signal pairs, center taps and host PHY connections.
- Verify the footprint, terminal numbering and pin-1 orientation.
- Check courtyard, assembly height and the specified mounting process.
- Confirm PoE++ application requirements and the component operating range.
- Validate samples on the intended board and record the production approval.
Frequently Asked Questions
What is LP72431ANL used for?
The LINK-PP LP72431ANL is a 10GBASE-T discrete LAN transformer listed for PoE++ Ethernet applications. Its surface mount configuration has a 24-terminal package and a four-pair schematic.
Is the LP72431ANL label sufficient to approve a complete PoE++ Ethernet port?
No. It identifies the component application. Match the exact drawing and ratings to the intended power mode, then qualify the host controller, connector, PCB current path and thermal design as a complete port.
Does LP72431ANL support Power over Ethernet (PoE)?
The supplied specification lists PoE++ application. This is a component selection attribute, not approval of a complete PSE or PD. Verify the model's documented electrical limits, the intended power mode and the complete host power path before production; do not infer a wattage or power class from the label alone.
Does LP72431ANL perform AutoMDX switching?
No. It is a passive magnetic component. The AutoMDX field refers to its use with an Ethernet interface supporting AutoMDX operation; pair detection and switching are functions of the host PHY.
What should be supplied when requesting LP72431ANL samples or a quotation?
Provide the complete part number, target quantity, host interface and required drawing revision. Confirm sample configuration, commercial terms and delivery schedule with LINK-PP; this page does not establish stock, MOQ or a fixed lead time.
Does the operating temperature rating qualify the complete host system?
No. The specification lists -40℃ TO +85℃ for this component. Check ambient conditions, assembly heating and the operating limits of the PHY, connector and surrounding electronics on the target equipment.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































