HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP7008FN.webp

Pulse H7008FNL Compatible LINK-PP LP7008FNL 10G Base-T Single Port SMD 24 PIN Lan Transformer Modules

P/N:

LP7008FNL

Manufacturer:

LINK-PP

Compatible Brand:

Pulse

Compatible P/N:

LP7008FNL

  • Compatible Brands: Pulse
  • Data Rate: 10G BASE-T
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: 0℃ TO +70℃
  • Application -LAN: ETHERNET(Non PoE)
  • P/N: LP7008FNL
  • Manufacture: LINK-PP
  • Compatible Brand: Pulse
  • Compatible P/N: LP7008FNL

Packaging Details:

N.W/pCS:

0.002kg

Package:

Reel

SPQ:

800pcs

Qty/carton:

4800pcs

Carton size:

37*37*25cm

G.W/carton:

7.2kg

Product Specifications

LINK-PP Part Number LP7008FNL Pulse Part Number H7008FNL
Part Status Active Transformer Type LAN Transformer
Construction Open Frame Application-LAN Ethernet (Non-PoE)
Number of Ports Single Port Speed 10GBASE-T
Package Tape & Reel Cores per Port 8
AutoMDX Yes Comment Same as NL Version
PIN Number 24 Mounting Type Surface Mount
Package Height (Inches/mm) 0.225 / 5.72 Package Length (Inches/mm) 0.540 / 13.72
Package Width (Inches/mm) 0.600 / 15.24 Temperature 0°C to +70°C
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C, S

Pulse H7008FNL Compatible 10GBASE-T LAN Transformer for Non-PoE Applications

The LINK-PP LP7008FNL is a single-port discrete 10GBASE-T LAN transformer module specified for high-speed Ethernet systems in non-PoE network architectures. Built in a 24-pin surface-mount (SMD) open-frame construction, it integrates an 8-core magnetic arrangement with a 1CT:1CT turns ratio (T, C, S configuration) to provide physical-layer isolation and differential signal coupling for 10G Ethernet circuits.

Featuring a 5.72 mm package height and a 13.72 mm by 15.24 mm board footprint, the module operates across a commercial temperature range of 0°C to +70°C and is supplied in Tape & Reel packaging for automated SMT assembly. It is positioned as a compatible alternative to the Pulse H7008FNL discrete transformer for enterprise routers, network appliances, signal generators, and embedded communication systems where non-PoE 10G physical-layer signal coupling is required.

Hardware designers should verify the mechanical land pattern, pin assignment, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Interface: 10GBASE-T
Reference Part: Pulse H7008FNL
Application: Ethernet (Non-PoE)
Package / Mounting: 24-Pin SMD (Open Frame)
Operating Temperature: 0°C to +70°C
Turns Ratio: 1CT:1CT (T, C, S)

Pulse H7008FNL Compatible Design Positioning

The LP7008FNL is positioned as a compatible alternative to the Pulse H7008FNL for 10GBASE-T Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package and interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

10GBASE-T Signal Transmission and Discrete Magnetics

In high-speed Ethernet systems, 10GBASE-T interfaces require careful physical-layer design to preserve signal fidelity across the operating bandwidth. Signal isolation, return loss, and differential trace symmetry must all be accounted for during motherboard routing.

Because the LP7008FNL is engineered specifically for non-PoE architectures, the internal magnetic structure is dedicated entirely to differential data transmission without incorporating high-current DC power paths. Discrete LAN magnetics provide the transformer and coupling functions between the host 10G PHY transceiver and the external cable interface.

Hardware engineers should evaluate the component in conjunction with the selected Ethernet PHY, controlled-impedance PCB routing, transient protection circuitry, and system-level EMC grounding.

Mechanical and PCB Considerations

Physical mounting and board layout are critical factors when implementing discrete surface-mount LAN magnetics:

1. 24-Pin Open-Frame Package

The open-frame construction provides a vertical height of 5.72 mm (0.225 inches) with a footprint of 13.72 mm by 15.24 mm. This low-profile form factor suits board designs with restricted vertical clearance, such as add-in cards and space-constrained network assemblies.

2. Tape & Reel Packaging for SMT Assembly

Supplied in Tape & Reel format, the LP7008FNL is engineered for automated pick-and-place equipment and standard surface-mount assembly workflows.

3. PCB Land Pattern and Pinout Verification

The module incorporates a 24-pin SMD footprint. Because pin arrangements and internal schematic connections can differ between manufacturers, engineers should confirm the land pattern, pin pitch, and schematic against official product drawings prior to finalizing board artwork.

Discrete Transformer vs. Integrated MagJack

Selecting between a discrete LAN transformer and an integrated MagJack involves several hardware design trade-offs:

  • Layout and Placement Flexibility: Discrete transformers allow engineers to place the magnetics independently on the PCB, optimizing the physical separation between the host PHY and the board edge.
  • Connector Selection Freedom: A discrete transformer architecture allows the design to be paired with a separate RJ45 connector, including standard right-angle jacks, vertical top-entry connectors, multi-port ganged arrays, or specialized enclosure-specific interfaces.
  • Thermal Separation: Separating the transformer from the physical I/O connector helps distribute heat dissipation across the board rather than concentrating thermal load at the front-panel connector cavity.

Architecture Comparison: Discrete 10G LAN Transformer vs. Alternative Implementations

Evaluation Metric LP7008FNL
10GBASE-T Non-PoE Transformer
LP7019FNL
10GBASE-T PoE+ Transformer
Integrated 10GBASE-T MagJack
Ethernet Speed 10GBASE-T 10GBASE-T 10GBASE-T
PoE Capability Non-PoE (Data only) Specified for PoE+ applications Integrated PoE / PoE+ capability
Component Form Factor 24-Pin SMD (Open Frame) 24-Pin SMD (Open Frame) RJ45 connector with integrated magnetics
I/O Connector Selection Independent (Can be paired with a separate RJ45 connector) Independent (Can be paired with a separate RJ45 connector) Fixed by connector assembly
Layout Placement Independent PCB placement Independent PCB placement Restricted to PCB board edge
Primary Application Data-only 10G routers, NICs, test I/O PoE+ enabled 10G hardware Standard front-panel Ethernet ports

Application Considerations for LP7008FNL

Target Application Profile Potential Configuration Primary Engineering Consideration
Enterprise Routers & 10G Core Switches 24-Pin SMD / Tape & Reel 10GBASE-T data throughput in data-only architectures, automated surface-mount assembly compatibility.
PCIe 10G Network Interface Cards (NICs) Low-Profile 5.72 mm Height Compact vertical profile suited to standard and low-profile expansion card envelopes.
Signal Generators & Test Instrumentation 24-Pin SMD High-frequency differential signal isolation and common-mode filtering across 10G operational bandwidths.
Commercial Network Hardware & Handheld Units 24-Pin SMD 0°C to +70°C operating temperature envelope, standard SMT assembly compatibility.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LP7008FNL, hardware engineers should confirm the following design parameters against the official datasheet:

  • Pinout and Schematic Alignment: Verify the 24-pin terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • PCB Land Pattern: Check pad dimensions, solder mask clearances, and pitch against the manufacturer's recommended footprint.
  • Package Clearances: Confirm the 5.72 mm package height and 13.72 mm x 15.24 mm footprint within the enclosure or card envelope.
  • PHY Interface Matching: Ensure controlled-impedance differential trace routing and AutoMDX compatibility with the selected 10G Ethernet PHY.
  • Thermal Conditions: Validate that the component operating environment remains within the specified 0°C to +70°C range.
  • SMT Process Compatibility: Verify Tape & Reel feeder setup and SMT placement parameters for the open-frame package.

Frequently Asked Questions

Is the LINK-PP LP7008FNL a compatible alternative to the Pulse H7008FNL?

The LP7008FNL is designed as a compatible alternative to the Pulse H7008FNL with a 24-pin SMD open-frame package, 10GBASE-T Ethernet capability, non-PoE data routing, and 1CT:1CT turns ratio. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the difference between the LP7008FNL and PoE-rated 10G transformers?

The LP7008FNL is specified as a Non-PoE transformer optimized solely for 10GBASE-T differential data communication. PoE-rated transformers (such as the LP7019FNL) include dedicated center-tap current-carrying paths structured to accommodate DC power delivery alongside data signals.

When should hardware designers select a discrete 10G LAN transformer instead of an integrated MagJack?

A discrete LAN transformer is typically selected when the board layout requires physical separation between the Ethernet PHY and the board edge, when thermal dissipation needs to be distributed away from the I/O panel, or when the design uses non-standard, vertical, or ruggedized RJ45 connectors.

How does the open-frame 24-pin package support automated manufacturing?

The 24-pin open-frame surface-mount package features a low-profile 5.72 mm height and is supplied in Tape & Reel format for automated SMT assembly workflows.

Does the LP7008FNL support AutoMDX?

Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected PHY interface and complete reference design before production use.

What is the operating temperature range for the LP7008FNL?

The LP7008FNL is rated for a commercial operating temperature range of 0°C to +70°C, suited for enterprise networking equipment, routers, test instrumentation, and commercial hardware.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download