Pulse H7019FNL Compatible LINK-PP LP7019FNL 10G Base-T Single Port SMD 24 PIN POE+ Ethernet Transformer
P/N:
LP7019FNL
Manufacturer:
LINK-PP
Compatible Brand:
Pulse
Compatible P/N:
H7019FNL
- Compatible Brands: Pulse
- Data Rate: 5G BASE-T
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: 0℃ TO +70℃
- Application -LAN: PoE+
- P/N: LP7019FNL
- Manufacture: LINK-PP
- Compatible Brand: Pulse
- Compatible P/N: H7019FNL
Packaging Details:
N.W/pCS:
0.002kg
Package:
Reel
SPQ:
800pcs
Qty/carton:
4800pcs
Carton size:
37*37*25cm
G.W/carton:
7.2kg
Product Specifications
| LINK-PP Part Number: | LP7019FNL | Pulse Part Number | H7019FNL |
| Part Status | Active | Transformer Type | Lan Transformer |
| Construction | OPEN FRAME | Application-Lan | Ethernet(PoE+) |
| Number of Ports | SINGLE | Speed | 10G Base-T |
| Package | Tape & Reel | Cores per Port | 8 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN Number | 24 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.225/5.72 | Package Length (Inches/mm) | 0.540/13.72 |
| Package Width (Inches/mm) | 0.600/15.24 | Temperature | 0℃ TO +70℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
Pulse H7019FNL Compatible 10GBASE-T LAN Transformer for PoE+ Applications
The LINK-PP LP7019FNL is a single-port discrete 10GBASE-T LAN transformer module specified for high-speed Ethernet systems with Power over Ethernet Plus (PoE+) requirements. Built in a 24-pin surface-mount (SMD) open-frame construction, it integrates an 8-core magnetic arrangement with a 1CT:1CT turns ratio (T, C, S configuration) to provide physical-layer isolation and signal coupling for 10G Ethernet circuits.
Featuring a 5.72 mm package height and a 13.72 mm by 15.24 mm board footprint, the module operates across a commercial temperature range of 0°C to +70°C and is supplied in Tape & Reel packaging for automated SMT assembly. It is positioned as a compatible alternative to the Pulse H7019FNL discrete transformer for networking hardware, including router platforms and embedded communication systems where the specified electrical and mechanical requirements are met.
Hardware designers should verify the mechanical land pattern, pin assignment, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.
Pulse H7019FNL Compatible Design Positioning
The LP7019FNL is positioned as a compatible alternative to the Pulse H7019FNL for 10GBASE-T Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package and interface characteristics.
To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.
10GBASE-T Signal Transmission and Discrete Magnetics
In high-speed Ethernet systems, 10GBASE-T interfaces require careful physical-layer design to preserve signal fidelity across the operating bandwidth. Signal isolation, return loss, and differential trace symmetry must all be accounted for during motherboard routing.
For designs requiring PoE+ power delivery, the magnetic interface must also accommodate the DC current paths associated with the power architecture. Discrete LAN magnetics like the LP7019FNL provide the transformer and coupling functions between the host 10G PHY transceiver and the external cable interface.
Hardware engineers should evaluate the component in conjunction with the selected Ethernet PHY, controlled-impedance PCB routing, transient protection circuitry, and system-level EMC grounding.
Mechanical and PCB Considerations
Physical mounting and board layout are critical factors when implementing discrete surface-mount LAN magnetics:
1. 24-Pin Open-Frame Package
The open-frame construction provides a vertical height of 5.72 mm (0.225 inches) with a footprint of 13.72 mm by 15.24 mm. This low-profile form factor suits board designs with restricted vertical clearance, such as add-in cards and space-constrained network assemblies.
2. Tape & Reel Packaging for SMT Assembly
Supplied in Tape & Reel format, the LP7019FNL is engineered for automated pick-and-place equipment and standard surface-mount assembly workflows.
3. PCB Land Pattern and Pinout Verification
The module incorporates a 24-pin SMD footprint. Because pin arrangements and internal schematic connections can differ between manufacturers, engineers should confirm the land pattern, pin pitch, and schematic against official product drawings prior to finalizing board artwork.
Discrete Transformer vs. Integrated MagJack
Selecting between a discrete LAN transformer and an integrated MagJack involves several hardware design trade-offs:
- Layout and Placement Flexibility: Discrete transformers allow engineers to place the magnetics independently on the PCB, optimizing the physical separation between the host PHY and the board edge.
- Connector Selection Freedom: A discrete transformer architecture allows the design to be paired with a separate RJ45 connector, including standard right-angle jacks, vertical top-entry connectors, multi-port ganged arrays, or specialized enclosure-specific interfaces.
- Thermal Separation: Separating the transformer from the physical I/O connector helps distribute heat dissipation across the board rather than concentrating thermal load at the front-panel connector cavity.
Architecture Comparison: Discrete 10G LAN Transformer vs. Alternative Implementations
| Evaluation Metric | LP7019FNL 10GBASE-T SMD Transformer |
Integrated 10GBASE-T MagJack | Discrete 1GBASE-T Transformer |
|---|---|---|---|
| Ethernet Speed | 10GBASE-T | 10GBASE-T | Typically up to 1000BASE-T only |
| PoE Capability | Specified for PoE+ applications | Integrated PoE / PoE+ capability | Model-dependent |
| Component Form Factor | 24-Pin SMD (Open Frame) | RJ45 connector with integrated magnetics | SMD or through-hole module |
| I/O Connector Selection | Independent (Can be paired with a separate RJ45 connector) | Fixed by connector assembly | Independent |
| Layout Placement | Independent PCB placement | Restricted to PCB board edge | Independent PCB placement |
| Primary Application | Routers, NICs, custom I/O designs | Standard front-panel Ethernet ports | Standard 1G networking hardware |
Application Considerations for LP7019FNL
| Target Application Profile | Potential Configuration | Primary Engineering Consideration |
|---|---|---|
| Enterprise Routers & Network Appliances | 24-Pin SMD / Tape & Reel | 10GBASE-T data throughput, PoE+ support, and automated surface-mount assembly compatibility. |
| PCIe Network Interface Cards (NICs) | Low-Profile 5.72 mm Height | Compact vertical profile suited to standard and low-profile expansion card envelopes. |
| Embedded Computing & Industrial Hardware | 24-Pin SMD | Flexibility to pair with specialized non-magnetic RJ45 jacks or enclosure-specific external connectors. |
| Commercial Networked Systems | 24-Pin SMD | 0°C to +70°C operating temperature envelope, standard SMT assembly compatibility. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LP7019FNL, hardware engineers should confirm the following design parameters against the official datasheet:
- Pinout and Schematic Alignment: Verify the 24-pin terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
- PCB Land Pattern: Check pad dimensions, solder mask clearances, and pitch against the manufacturer's recommended footprint.
- Package Clearances: Confirm the 5.72 mm package height and 13.72 mm x 15.24 mm footprint within the enclosure or card envelope.
- PoE Implementation: Ensure board trace widths for center-tap power lines meet the current requirements of the target PoE+ architecture.
- Thermal Conditions: Validate that the component operating environment remains within the specified 0°C to +70°C range.
- SMT Process Compatibility: Verify Tape & Reel feeder setup and SMT placement parameters for the open-frame package.
Frequently Asked Questions
Is the LINK-PP LP7019FNL a compatible alternative to the Pulse H7019FNL?
The LP7019FNL is designed as a compatible alternative to the Pulse H7019FNL with a 24-pin SMD open-frame package, 10GBASE-T Ethernet capability, PoE+ application support, and 1CT:1CT turns ratio. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.
When should hardware designers select a discrete LAN transformer instead of an integrated MagJack?
A discrete LAN transformer is typically selected when the board layout requires physical separation between the Ethernet PHY and the board edge, when thermal dissipation needs to be distributed away from the I/O panel, or when the design uses non-standard, vertical, or ruggedized RJ45 connectors.
What should be evaluated when implementing PoE+ with this transformer?
The LP7019FNL is specified for Ethernet PoE+ applications. Designers should validate the complete system implementation, including PSE or PD controller selection, PCB trace current capacity, thermal conditions, and compliance with applicable IEEE PoE standards within the 0°C to +70°C operating range.
How does the open-frame 24-pin package support automated manufacturing?
The 24-pin open-frame surface-mount package features a low-profile 5.72 mm height and is supplied in Tape & Reel format for automated SMT assembly workflows.
Does the LP7019FNL support AutoMDX?
Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected PHY interface and complete reference design before production use.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































