HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 1(1710293949602).jpg
  • 2(1710293949934).jpg

X Multiple XF-GH-002 Compatible LINK-PP LP7011ANL 10G Base-T Single Port SMD 24 PIN Low Profile PoE Lan Magnetics

P/N:

LP7011ANL

Manufacturer:

LINK-PP

Compatible Brand:

X Multiple

Compatible P/N:

XF-GH-002

  • Compatible Brands: X Multiple
  • Data Rate: 10G BASE-T
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: -40℃ TO +85°C
  • Application -LAN: PoE
  • P/N: LP7011ANL
  • Manufacture: LINK-PP
  • Compatible Brand: X Multiple
  • Compatible P/N: XF-GH-002

Product Specifications

LINK-PP Part Number LP7011ANL X Multiple Part Number XF-GH-002
Part Status Active Transformer Type LAN Transformer
Construction Open Frame Application-LAN Ethernet (PoE)
Number of Ports Single Port Speed 10GBASE-T
Package Tape & Reel Cores per Port 8
AutoMDX Yes Comment Same as NL Version
PIN Number 24 Mounting Type Surface Mount
Package Height (Inches/mm) 0.157 / 4.00 Package Length (Inches/mm) 0.594 / 15.10
Package Width (Inches/mm) 0.394 / 10.00 Temperature -40°C to +85°C
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C, S

X Multiple XF-GH-002 Compatible Single-Port 10GBASE-T Low-Profile LAN Transformer for PoE Applications

The LINK-PP LP7011ANL is a single-port discrete 10GBASE-T LAN transformer module specified for high-speed Ethernet systems with Power over Ethernet (PoE) requirements. Built in an ultra-low-profile 24-pin surface-mount (SMD) open-frame construction, it integrates an 8-core magnetic arrangement with a 1CT:1CT turns ratio (T, C, S configuration) to provide physical-layer isolation and differential signal coupling for 10G Ethernet circuits.

Featuring a 4.00 mm (0.157 inches) package height and a 15.10 mm by 10.00 mm board footprint, the module operates across an extended industrial temperature range of -40°C to +85°C and is supplied in Tape & Reel packaging for automated SMT assembly. It is positioned as a compatible alternative to the X Multiple XF-GH-002 discrete transformer for enterprise routers, set-top boxes, switched-mode power supplies (SMPS), digital cameras, and networked medical equipment interfaces where high-bandwidth 10G signal coupling, low component clearance, and PoE capability are primary design requirements.

Hardware designers should verify the mechanical land pattern, pin assignment, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Interface: 10GBASE-T
Reference Part: X Multiple XF-GH-002
Package Profile: Ultra-Low Profile (4.00 mm Height)
Application: Ethernet (PoE)
Package / Mounting: 24-Pin SMD (Open Frame)
Operating Temperature: -40°C to +85°C Industrial

X Multiple XF-GH-002 Compatible Design Positioning

The LP7011ANL is positioned as a compatible alternative to the X Multiple XF-GH-002 for 10GBASE-T Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and electrical interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

10GBASE-T Signal Transmission and PoE Power Integration

In high-speed Ethernet systems, 10GBASE-T interfaces require careful physical-layer design to preserve signal fidelity across the operating bandwidth. Signal isolation, return loss, and differential trace symmetry must all be accounted for during motherboard routing.

For designs requiring PoE power delivery, the internal transformer center taps are structured to accommodate DC power currents delivered over the network cabling. The magnetic structure maintains required electrical isolation and signal coupling across the extended -40°C to +85°C industrial operating temperature range.

Hardware engineers should evaluate the component in conjunction with the host 10G Ethernet PHY, controlled-impedance differential PCB trace routing, transient protection circuitry, and system-level EMC grounding.

Ultra-Low Profile (4.00 mm) Packaging and Space-Constrained Layouts

Physical height constraints frequently influence component selection in dense electronic assemblies:

  • 4.00 mm Ultra-Low Profile Height: With a package height of 4.00 mm (0.157 inches), the LP7011ANL fits low-profile PCIe cards, mezzanine daughtercards, and shallow enclosure envelopes where standard 5.72 mm SMD transformers exceed vertical clearance limits.
  • Slim 10.00 mm Width Footprint: The compact 15.10 mm by 10.00 mm board footprint preserves horizontal surface area on the host PCB, allowing shorter differential trace routing between the Ethernet PHY and the external connector interface.
  • Tape & Reel SMT Packaging: Supplied in Tape & Reel format, the open-frame component is engineered for automated high-speed pick-and-place equipment and standard surface-mount assembly workflows.

Discrete Transformer vs. Integrated MagJack Solutions

Selecting between a discrete LAN transformer and an integrated MagJack involves several hardware design trade-offs:

  • Layout and Placement Flexibility: Discrete transformers allow engineers to place the magnetics independently on the PCB, optimizing the physical separation between the host PHY and the board edge.
  • Connector Selection Freedom: A discrete transformer architecture allows the design to be paired with a separate RJ45 connector, including standard right-angle jacks, vertical top-entry connectors, multi-port ganged arrays, or specialized enclosure-specific interfaces.
  • Thermal Separation: Separating the transformer from the physical I/O connector helps distribute heat dissipation across the board rather than concentrating thermal load at the front-panel connector cavity.

Architecture Comparison: Low-Profile 10G Transformer vs. Alternative Implementations

Evaluation Metric LP7011ANL
Low-Profile 4.00mm 10G Transformer
LP7019FNL
Standard 5.72mm 10G Transformer
Integrated 10GBASE-T
MagJack
Package Height (Z-Axis) Ultra-Low Profile (4.00 mm / 0.157 in) Standard Profile (5.72 mm / 0.225 in) Standard Connector Height (~13.50 mm)
Ethernet Speed 10GBASE-T 10GBASE-T 10GBASE-T
PoE Capability Specified for PoE applications Specified for PoE+ applications Integrated PoE / PoE+ capability
Operating Temperature -40°C to +85°C (Industrial) 0°C to +70°C Model-dependent
Component Form Factor 24-Pin SMD (Open Frame) 24-Pin SMD (Open Frame) RJ45 connector with integrated magnetics
I/O Connector Selection Independent (Can be paired with a separate RJ45 connector) Independent (Can be paired with a separate RJ45 connector) Fixed by connector assembly
Primary Advantage Ultra-low vertical clearance for thin 10G I/O Standard profile for enterprise routing Consolidates jack and magnetics into one component

Application Considerations for LP7011ANL

Target Application Profile Mounting / Packaging Primary Engineering Consideration
Networked Medical & Diagnostic Interfaces Low-Profile 4.00 mm Height Compact vertical profile fits slim medical diagnostic hardware without compromising 10G physical-layer isolation.
Enterprise Routers & Core Network Gateways 24-Pin SMD / Tape & Reel 10GBASE-T data throughput, PoE support, and automated surface-mount assembly compatibility across -40°C to +85°C.
PCIe 10G Network Interface Cards (NICs) Low-Profile 4.00 mm Height Ultra-low vertical clearance fits low-profile add-in cards and mezzanine modules without exceeding bracket limits.
Switched-Mode Power Supplies (SMPS) & Monitors 24-Pin SMD (-40°C to +85°C) -40°C to +85°C operating temperature range; PoE center-tap current path support.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LP7011ANL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Vertical Clearance: Verify the 4.00 mm height, 15.10 mm length, and 10.00 mm width against enclosure or daughtercard envelope limits.
  • Pinout and Schematic Alignment: Verify the 24-pin terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • PCB Land Pattern: Check solder pad dimensions, pitch, and solder mask clearances on the manufacturer's recommended footprint.
  • PoE Power Circuitry: Ensure PCB copper trace widths connecting transformer center taps to PSE or PD power controllers meet the current requirements of the target PoE architecture.
  • PHY Interface Matching: Ensure controlled-impedance differential trace routing and AutoMDX compatibility with the selected 10G Ethernet PHY.
  • Thermal Operating Environment: Confirm that the operating environment remains within the specified -40°C to +85°C industrial temperature range.
  • SMT Process Compatibility: Verify Tape & Reel feeder setup and SMT placement parameters for the open-frame package.

Frequently Asked Questions

Is the LINK-PP LP7011ANL a compatible alternative to the X Multiple XF-GH-002?

The LP7011ANL is designed as a compatible alternative to the X Multiple XF-GH-002 with a 24-pin SMD open-frame package, ultra-low 4.00 mm profile, 10GBASE-T Ethernet capability, PoE application support, 1CT:1CT turns ratio, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

What is the main design benefit of the 4.00 mm ultra-low profile height?

The 4.00 mm height allows this 10G transformer to be mounted on space-constrained assemblies such as low-profile PCIe network cards, mezzanine daughterboards, medical instrument interfaces, and compact routers where taller standard transformers cannot be accommodated.

How does the LP7011ANL support Power over Ethernet (PoE)?

The LP7011ANL is specified for Ethernet PoE applications, incorporating transformer center-tap terminations structured to carry DC power currents across the differential data pairs while maintaining 10GBASE-T signal isolation across an extended -40°C to +85°C operating range.

When should hardware designers select a discrete LAN transformer instead of an integrated MagJack?

A discrete LAN transformer is typically selected when the board layout requires physical separation between the Ethernet PHY and the board edge, when thermal dissipation needs to be distributed away from the I/O panel, or when the design uses non-standard, vertical, or ruggedized RJ45 connectors.

Does the LP7011ANL support AutoMDX?

Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected PHY interface and complete reference design before production use.

What is the operating temperature range for the LP7011ANL?

The LP7011ANL is rated for an industrial operating temperature range of -40°C to +85°C, making it suitable for outdoor gateways, high-density server environments, power supply systems, and harsh industrial networks.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download