HX5224CNL Compatible LINK-PP LP5224CNL 1000 Base-T 4KV REINFORCED High Isolation PoE+ Lan Transformer Single Port 24PIN
P/N:
LP5224CNL
Manufacturer:
LINK-PP
Compatible Brand:
Pulse
Compatible P/N:
HX5224CNL
- Compatible Brands: Pulse
- Data Rate: 1000 BASE-T
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: PoE+
- P/N: LP5224CNL
- Manufacture: LINK-PP
- Compatible Brand: Pulse
- Compatible P/N: HX5224CNL
Packaging Details:
N.W/pCS:
0.004 kg
Package:
Reel
SPQ:
400 pcs
Qty/carton:
1600 pcs
Carton size:
36*35.5*23cm
G.W/carton:
5.9 kg
Product Specifications
| LINK-PP Part Number | LP5224CNL | Pulse Part Number | HX5224CNL |
| Part Status | Active | Transformer Type | Lan Transformer |
| Construction | OPEN FRAME | Application-Lan | Ethernet(PoE+) |
| Number of Ports | Single Port | Speed | 1000 Base-T High Isolation |
| Package | Tape & Reel | Cores per Port | 8 |
| AutomDX | Yes | Hi-POT RATING | 4KV REINFORCED |
| PIN Number | 24 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.385/9.77 | Package Length (Inches/mm) | 0.728/18.50 |
| Package Width (Inches/mm) | 0.628/15.94 | Temperature | -40℃ TO +85℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
LINK-PP LP5224CNL Technical & Compatibility Overview
The LINK-PP LP5224CNL is a single-port 24-pin surface-mount (SMD/SMT) 10/100/1000BASE-T Gigabit Ethernet LAN magnetic transformer module with 4KV reinforced isolation and PoE+ (IEEE 802.3at) compliance. Engineered as a functional and footprint-compatible alternative to the Pulse Electronics HX5224CNL, it incorporates an 8-core magnetic assembly (1CT:1CT turns ratio) rated for 4000Vrms reinforced dielectric insulation, delivered in Tape & Reel packaging for automated SMT pick-and-place assembly across an extended industrial operating temperature range of -40°C to +85°C.
- Footprint & Schematic Alignment: Designed for footprint and pinout compatibility with Pulse HX5224CNL, supporting direct board-level evaluation and secondary sourcing.
- 4KV Reinforced Galvanic Isolation: 4000Vrms Hi-Pot rating provides reinforced insulation compliance for high-voltage industrial I/O controllers and medical equipment interfaces.
- PoE+ (IEEE 802.3at) Power Support: Engineered to carry balanced DC line currents up to 600mA/port (30W) without magnetic core saturation.
- 24-Pin SMT Open-Frame Construction: Standard 9.77mm (0.385 in) package height in Tape & Reel format for automated high-volume SMT reflow soldering.
Key Design Benefits
- 4000Vrms High-Isolation Safety: Reinforced dielectric insulation protects sensitive I/O controllers, embedded mainboards, and industrial PCs from severe ground loops and high-voltage electrical surges.
- PoE+ Power Delivery Capability: Complies with IEEE 802.3at specifications, enabling simultaneous 1 Gbps Gigabit data transmission and DC power delivery to powered edge devices.
- Extended Industrial Thermal Range: Operates reliably across -40°C to +85°C, making it suitable for outdoor automation panels, fieldbus gateways, and power controllers.
- 8-Core Gigabit Noise Suppression: Integrated isolation transformers and common-mode chokes provide galvanic isolation and attenuate common-mode EMI noise across differential pairs.
- Second-Source Supply Continuity: Offers hardware engineering and procurement teams a pin-compatible alternative to mitigate component lead times and supply chain single-point risks.
Integrated Magnetics & Electrical Architecture
The LP5224CNL integrates 10/100/1000BASE-T Gigabit magnetics into a discrete 24-pin SMT module, reducing the need for long differential trace runs to PHY transceivers on the motherboard.
8-Core Gigabit Transformer Matrix
The integrated magnetic assembly utilizes an 8-core topology across all 4 differential pairs with a 1CT:1CT turns ratio. This structure provides 4KVrms reinforced galvanic isolation between PHY transceivers and network media, maintaining differential signal balance across 10/100/1000BASE-T frequencies.
PoE+ DC Current Handling
Transformer windings and center-tap nodes are rated to carry balanced DC bias currents up to 600mA continuous per port without magnetic core saturation, ensuring signal integrity under PoE+ power loading.
Mechanical Specifications & SMT Layout
The LP5224CNL features package dimensions of 9.77mm (H) x 15.94mm (W) x 18.50mm (L) [0.385 x 0.628 x 0.728 in]. The 24-pin SMT Gull-Wing lead layout is designed for Tape & Reel automated pick-and-place assembly and standard Pb-free reflow soldering profiles.
Target Applications
- Industrial I/O Controllers & Automation: High-isolation (4KV reinforced) 1 Gbps LAN magnetic module for PLC controllers, fieldbus gateways, and factory automation hardware.
- Industrial PCs & Embedded Mainboards: Industrial-grade (-40°C to +85°C) 24-pin SMT Gigabit transformer for ruggedized embedded single-board computers.
- Medical Equipment & Power Systems: High-dielectric 4000Vrms isolation for medical diagnostic controllers, SMPS monitoring boards, and industrial power equipment.
Pulse HX5224CNL Replacement Compatibility Checklist
When evaluating the LINK-PP LP5224CNL as an alternative to Pulse Electronics HX5224CNL, hardware engineers should verify the following parameters against their system specification:
- Schematic & Pinout Alignment: Confirm that your 24-pin SMT Gigabit LAN layout matches the 1CT:1CT primary/secondary turns ratio and center-tap configuration.
- 4KV Reinforced Isolation Requirement: Verify that your system safety specification requires a 4000Vrms high-isolation dielectric rating.
- PoE+ Power Specification: Confirm that your circuit design requires IEEE 802.3at PoE+ (600mA) DC current capability across differential pairs.
- Package Footprint & Height: Verify that the 24-pin SMT pad layout and 9.77mm package height fit your PCB SMT clearance requirements.
Frequently Asked Questions
Is LINK-PP LP5224CNL a pin-compatible alternative for Pulse HX5224CNL in 10/100/1000BASE-T high-isolation designs?
Yes. The LP5224CNL is engineered with matching 24-pin SMT pad layout, 8-core 1CT:1CT Gigabit magnetics configuration, 4KV reinforced isolation voltage, IEEE 802.3at PoE+ power compliance, -40°C to +85°C industrial temperature rating, and 9.77mm package height to serve as a functional drop-in footprint alternative for Pulse HX5224CNL.
What is the advantage of 4KV reinforced dielectric isolation on the LP5224CNL?
A 4KVrms reinforced isolation rating provides enhanced electrical safety and surge immunity, preventing high-voltage transients in industrial I/O controllers and medical equipment from damaging sensitive Ethernet PHY transceivers.
What CAD and engineering validation assets are available for Pulse HX5224CNL cross-reference checking?
LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.
How can procurement and engineering teams request samples or a quotation for LP5224CNL as an alternative to Pulse HX5224CNL?
Procurement and engineering teams can contact LINK-PP to request LP5224CNL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support for replacing Pulse HX5224CNL.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































