Pulse HX1224CNL Compatible LINK-PP LP42430ANL 10/100 Base-T High Isolation 4KV REINFORCED Single Port 24 PIN POE Lan Transformers
P/N:
LP42430ANL
Manufacturer:
LINK-PP
Compatible Brand:
Pulse
Compatible P/N:
HX1224CNL
- Compatible Brands: Pulse
- Data Rate: 10 BASE-T,100 BASE-TX
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: PoE
- P/N: LP42430ANL
- Manufacture: LINK-PP
- Compatible Brand: Pulse
- Compatible P/N: HX1224CNL
Packaging Details:
N.W/pCS:
0.005 kg
Package:
Reel
SPQ:
350 pcs
Qty/carton:
1400 pcs
Carton size:
37*37*25cm
G.W/carton:
7 kg
Product Specifications
| LINK-PP Part Number | LP42430ANL | Pulse Part Number | HX1224CNL |
| Part Status | Active | Transformer Type | Lan Transformer |
| Construction | OPEN FRAME | Application-Lan | Ethernet(PoE) |
| Number of Ports | Single Port | Speed | 10/100 Base-T High Isolation |
| Package | Tape & Reel | Cores per Port | 4 |
| AutomDX | Yes | Hi-POT RATING | 4KV REINFORCED |
| PIN Number | 24 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.245/6.22 | Package Length (Inches/mm) | 0.537/13.64 |
| Package Width (Inches/mm) | 0.590/14.99 | Temperature | -40℃ TO +85℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
LINK-PP LP42430ANL Technical & Compatibility Overview
The LINK-PP LP42430ANL is a single-port 24-pin surface-mount (SMD/SMT) 10/100BASE-TX Fast Ethernet LAN magnetic transformer module with 4KV reinforced high isolation and Power over Ethernet (PoE / IEEE 802.3af) compliance. Engineered as a functional and footprint-compatible alternative to the Pulse Electronics HX1224CNL, it incorporates a 4-core magnetic assembly (1CT:1CT turns ratio) rated for 4000Vrms reinforced dielectric insulation, delivered in Tape & Reel packaging for automated SMT pick-and-place assembly across an extended industrial operating temperature range of -40°C to +85°C.
- Footprint & Schematic Alignment: Designed for footprint and pinout compatibility with Pulse HX1224CNL, supporting direct board-level evaluation and secondary sourcing.
- 4KV Reinforced Galvanic Isolation: 4000Vrms Hi-Pot rating provides reinforced insulation compliance for surgical medical consoles, patient care devices, and high-voltage industrial controllers.
- PoE (IEEE 802.3af) Power Support: Engineered to carry balanced DC line currents up to 350mA/port (15.4W) without magnetic core saturation.
- 24-Pin SMT Open-Frame Construction: Standard 6.22mm (0.245 in) package height in Tape & Reel format for automated high-volume SMT reflow soldering.
Key Design Benefits
- 4000Vrms High-Isolation Safety: Reinforced dielectric insulation protects sensitive surgical instruments, patient-connected circuits, and industrial PCs from high-voltage transients and ground loops.
- PoE Power Delivery Capability: Complies with IEEE 802.3af specifications, enabling simultaneous 10/100 Mbps Fast Ethernet data transmission and DC power feeding to remote powered devices (PDs).
- Extended Industrial Thermal Range: Operates reliably across -40°C to +85°C, making it suitable for outdoor automation panels, fieldbus gateways, and power controllers.
- 4-Core Fast Ethernet Signal Balance: Integrated isolation transformers and common-mode chokes provide galvanic isolation and attenuate common-mode EMI noise across differential pairs.
- Second-Source Supply Continuity: Offers hardware engineering and procurement teams a pin-compatible alternative to mitigate component lead times and supply chain single-point risks.
Integrated Magnetics & Electrical Architecture
The LP42430ANL integrates 10/100BASE-TX Fast Ethernet magnetics into a discrete 24-pin SMT module, reducing the need for long differential trace runs to PHY transceivers on the motherboard.
4-Core Fast Ethernet Transformer Matrix
The integrated magnetic assembly utilizes a 4-core topology with a 1CT:1CT turns ratio across transmit and receive lines. This structure provides 4KVrms reinforced galvanic isolation between PHY transceivers and network media while suppressing common-mode noise across 10/100BASE-TX lines.
PoE DC Current Handling
Transformer windings and center-tap nodes are rated to carry balanced DC bias currents up to 350mA continuous per port without magnetic core saturation, ensuring signal integrity under IEEE 802.3af PoE power loading.
Mechanical Specifications & SMT Layout
The LP42430ANL features package dimensions of 6.22mm (H) x 14.99mm (W) x 13.64mm (L) [0.245 x 0.590 x 0.537 in]. The 24-pin SMT Gull-Wing lead layout is designed for Tape & Reel automated pick-and-place assembly and standard Pb-free reflow soldering profiles.
Target Applications
- Surgical Equipment & Medical Consoles: High-isolation (4KV reinforced) 10/100 Mbps PoE LAN magnetic module for surgical consoles, patient monitoring systems, and bedside diagnostic hardware.
- Industrial PCs & Automation Gateways: Industrial-grade (-40°C to +85°C) 24-pin SMT Fast Ethernet transformer for PLC controllers, fieldbus modules, and factory automation panels.
- Network Firewalls & Security Routers: High-isolation signal and power delivery for enterprise security appliances, digital cameras, and smart meters.
Pulse HX1224CNL Replacement Compatibility Checklist
When evaluating the LINK-PP LP42430ANL as an alternative to Pulse Electronics HX1224CNL, hardware engineers should verify the following parameters against their system specification:
- Schematic & Pinout Alignment: Confirm that your 24-pin SMT Fast Ethernet LAN layout matches the 1CT:1CT primary/secondary turns ratio and center-tap configuration.
- 4KV Reinforced Isolation Requirement: Verify that your system safety specification requires a 4000Vrms reinforced high-isolation dielectric rating.
- PoE Power Specification: Confirm that your circuit design requires IEEE 802.3af PoE (350mA) DC current capability across differential pairs.
- Package Footprint & Height: Verify that the 24-pin SMT pad layout and 6.22mm package height fit your PCB SMT clearance requirements.
Frequently Asked Questions
Is LINK-PP LP42430ANL a pin-compatible alternative for Pulse HX1224CNL in 10/100BASE-T high-isolation PoE designs?
Yes. The LP42430ANL is engineered with matching 24-pin SMT pad layout, 4-core 1CT:1CT Fast Ethernet magnetics configuration, 4KV reinforced isolation voltage, IEEE 802.3af PoE power compliance, -40°C to +85°C industrial temperature rating, and 6.22mm package height to serve as a functional drop-in footprint alternative for Pulse HX1224CNL.
What is the advantage of 4KV reinforced dielectric isolation on the LP42430ANL?
A 4KVrms reinforced isolation rating provides enhanced electrical safety and surge immunity, preventing high-voltage transients in surgical equipment, patient monitoring consoles, and industrial automation hardware from damaging sensitive Ethernet PHY transceivers.
What CAD and engineering validation assets are available for Pulse HX1224CNL cross-reference checking?
LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.
How can procurement and engineering teams request samples or a quotation for LP42430ANL as an alternative to Pulse HX1224CNL?
Procurement and engineering teams can contact LINK-PP to request LP42430ANL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support for replacing Pulse HX1224CNL.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































