HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP89604PNL-1.jpg
  • LP89604PNL-2.jpg

LP89604PNL High PoE+(850mA) Enabled Transformer 1000 Base-T Quad Port THT 91 Pin Magnetics

P/N:

LP89604PNL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LP89604PNL

  • Compatible Brands: LINK-PP
  • Data Rate: 1000 BASE-T
  • Mounting Type: THT
  • Temperature: 0℃ TO +70℃
  • Application -LAN: PoE+
  • P/N: LP89604PNL
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LP89604PNL

Packaging Details:

N.W/pCS:

0.007 kg

Package:

Reel

SPQ:

600 pcs

Qty/carton:

2400 pcs

Carton size:

37*37*25cm

G.W/carton:

4.2 kg

Product Specifications

LINK-PP Part Number LP89604PNL Transformer Type LAN Transformer
Part Status Active Turns Ratio - Primary:Secondary 1:1 Transmitter, 1:1 Receiver
Construction Open Frame Application-LAN Ethernet (PoE+)
Number of Ports Quad Port Speed 10/100/1000BASE-T
Package Tape & Reel Cores per Port 32
AutoMDX Yes Comment Same as NL Version
PIN Number 91 Mounting Type Through Hole (THT)
Package Height (Inches/mm) 0.622 / 15.80 Package Length (Inches/mm) 1.106 / 28.10
Package Width (Inches/mm) 1.138 / 28.90 Temperature 0°C to +70°C
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C, S

Quad-Port Gigabit 10/100/1000BASE-T Discrete LAN Transformer Module for High-Power PoE+ Applications

The LINK-PP LP89604PNL is a quad-port discrete LAN transformer module engineered for high-density 10/100/1000BASE-T Gigabit Ethernet applications requiring Power over Ethernet Plus (PoE+ / High PoE up to 850 mA). Built in a through-hole technology (THT) open-frame construction, it consolidates four independent Gigabit magnetic channels into a single 28.10 mm by 28.90 mm board footprint.

Featuring a 1:1 transmitter and 1:1 receiver turns ratio (1CT:1CT, T, C, S configuration), the module provides galvanic isolation, differential signal coupling, and common-mode noise suppression across all 16 differential pairs (4 pairs per port). Specified for an operating temperature range of 0°C to +70°C with AutoMDX support, it is suited for multi-port enterprise switches, routers, PoE power sourcing equipment (PSE), and network security appliances.

Hardware engineers should review the mechanical drawing, pin assignment schematic, PCB land pattern, and PHY interface guidelines against system specifications before finalizing board layouts for production.

Port Density: Quad Port (4-Channel Integration)
Ethernet Speed: 10/100/1000BASE-T Gigabit
Power Delivery: PoE+ Capable (Up to 850mA Current)
Mounting Type: Through-Hole Technology (THT)
Construction: Open Frame Package
Operating Temperature: 0°C to +70°C Commercial

Quad-Port Density and High-Current PoE+ Power Integration

High-density multi-port networking equipment requires board architectures that maintain signal integrity while managing substantial DC current distribution across multiple Ethernet channels:

  • Quad-Channel Layout Consolidation: Consolidating four Gigabit channels into a single physical module streamlines routing between quad-port Ethernet PHY transceivers and external RJ45 connectors, minimizing board area congestion and trace length disparities compared to using four discrete single-port transformers.
  • PoE+ Current Handling (Up to 850 mA): Designed for high-power PoE+ architectures, the internal magnetic windings and center taps are structured to accommodate continuous DC current injection up to 850 mA per port. This helps maintain open-circuit inductance (OCL) and low-frequency baseline wander compensation under high DC-bias conditions.
  • Independent I/O Pairing: As a discrete LAN magnetics module, the LP89604PNL allows hardware designers to pair the four magnetic channels with any non-magnetic RJ45 connector configuration, such as 1x4 horizontal ganged jacks, 2x2 stacked connectors, or custom ruggedized I/O interfaces.

Through-Hole (THT) Mounting and Open-Frame Thermal Management

Multi-channel magnetics carrying concurrent high-speed data and PoE power introduce specific mechanical and thermal design considerations:

1. Robust THT Mechanical and Electrical Interconnection

Through-hole pin mounting provides mechanical anchoring into the PCB substrate, resisting thermal stress and vibration in dense multi-port equipment. The through-hole solder joints also provide reliable, low-impedance electrical paths for high-current PoE+ power rails.

2. Open-Frame Convective Heat Dissipation

The open-frame package allows ambient air to circulate directly around the internal magnetic toroids. This convective cooling helps distribute thermal energy generated by combined high-bandwidth packet switching and PoE DC current transmission, avoiding localized heat accumulation.

3. Symmetrical 1CT:1CT Physical-Layer Coupling

The module incorporates a symmetrical 1CT:1CT turns ratio across both transmit (TX) and receive (RX) differential channels (T, C, S configuration), specified for AutoMDX-compatible Gigabit PHY implementations.

Architecture Comparison: Quad-Port THT LAN Transformer vs. Alternative Implementations

Evaluation Metric LP89604PNL
Quad-Port THT Transformer
4 x Single-Port
SMD PoE+ Transformers
Quad-Port Integrated
MagJack (e.g., 2x2 or 1x4)
Channel Integration Quad Port (4 Channels Consolidated) Single channel per component Quad port integrated with RJ45
PoE Current Capability PoE+ Capable (Up to 850 mA) Model-dependent (typically 350–720 mA) Model-dependent
Mounting Technology Through-Hole (THT) Surface Mount (SMD) Through-Hole (THT)
I/O Connector Flexibility Independent (Pairs with any RJ45 style) Independent Fixed by connector assembly
PCB Space & Component Count Reduced — single 4-port module Higher — four individual placements required Consolidates jack and magnetics
Thermal Management Open-frame convective airflow Planar conduction to PCB Enclosed inside connector shield

Application Considerations for LP89604PNL

Target Application Profile Potential Mounting Form Primary Engineering Consideration
Multi-Port Enterprise Switches & Routers Through-Hole (THT) / Open Frame Consolidates four Gigabit channels; supports high-density multi-port front-end architectures.
PoE+ Power Sourcing Equipment (PSE) & Midspans Through-Hole (THT) / Open Frame Accommodates DC current up to 850 mA per port; reliable THT solder joints for high-current power routing.
High-Power IP Surveillance NVRs & Gateways Through-Hole (THT) / Open Frame Reliable 1000BASE-T data transmission combined with high-power PoE distribution for PTZ cameras.
Industrial Communications & Automation Hubs Through-Hole (THT) / Open Frame THT pin anchoring against equipment vibration; open-frame thermal management across 0°C to +70°C.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LP89604PNL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Vertical Clearance: Verify the 15.80 mm height, 28.10 mm length, and 28.90 mm width against enclosure envelope requirements.
  • PCB Land Pattern & Hole Matrix: Confirm through-hole drill diameters, pad annular rings, and pin pitch on the manufacturer's footprint drawing.
  • PoE+ Current & Trace Widths: Ensure PCB copper trace widths connecting transformer center taps to PSE/PD power circuitry can handle up to 850 mA continuous current.
  • Quad-PHY Differential Routing: Verify controlled-impedance differential trace routing, length matching, and isolation barriers across all four Gigabit channels.
  • Thermal Operating Environment: Confirm ambient airflow and validate that the component operating environment remains within the specified 0°C to +70°C range.
  • Soldering Process Compatibility: Verify through-hole wave or selective soldering profiles for the multi-pin open-frame assembly.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LP89604PNL?

The LP89604PNL is a quad-port discrete LAN transformer module supporting 10/100/1000BASE-T Gigabit Ethernet and PoE+ applications up to 850 mA. It features a 1:1 turns ratio (1CT:1CT, T, C, S configuration), through-hole (THT) mounting, open-frame construction, and an operating temperature range of 0°C to +70°C.

What is the advantage of a quad-port LAN transformer over four single-port modules?

A quad-port transformer module integrates four Gigabit magnetic channels into a single 28.10 mm x 28.90 mm footprint. This reduces component placement count, streamlines PCB differential trace routing directly from quad-PHY transceivers, and saves board area compared to four separate single-port transformers.

How does the LP89604PNL support High PoE+ (850 mA) applications?

The LP89604PNL incorporates magnetic windings and center-tap terminations engineered to accommodate DC bias currents up to 850 mA per port, supporting high-power PoE+ architectures while maintaining the required open-circuit inductance (OCL) and Gigabit differential signal performance.

What is the benefit of through-hole (THT) mounting for this module?

Through-hole mounting provides robust mechanical anchoring into the PCB substrate and offers reliable, low-impedance solder connections capable of carrying high continuous DC currents in multi-channel PoE+ power delivery systems.

Why is open-frame construction used for this transformer module?

Open-frame construction allows ambient air to circulate directly around the magnetic toroids, facilitating convective heat dissipation during simultaneous four-port Gigabit traffic and high-current PoE+ power delivery.

Does the LP89604PNL support AutoMDX?

Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected Ethernet PHY interface and reference design guidelines before finalizing production layouts.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download