HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP1164NL.jpg
  • LP1164NL1.jpg

X Multiple XTFZ-M-3007A-C-MOA Compatible LINK-PP LP1164NL 10/100 Base-T Quad Port SMD 40PIN Ethernet LAN Magnetic Transformer

P/N:

LP1164NL

Manufacturer:

LINK-PP

Compatible Brand:

X Multiple

Compatible P/N:

XTFZ-M-3007A-C-MOA

  • Compatible Brands: X Multiple
  • Data Rate: 10 BASE-T,100 BASE-TX
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: 0℃ TO +70℃
  • Application -LAN: ETHERNET(Non PoE)
  • P/N: LP1164NL
  • Manufacture: LINK-PP
  • Compatible Brand: X Multiple
  • Compatible P/N: XTFZ-M-3007A-C-MOA

Packaging Details:

N.W/pCS:

0.005kg

Package:

Reel

SPQ:

400pcs

Qty/carton:

1600pcs

Carton size:

36*35.5*23cm

G.W/carton:

7.5kg

Product Specifications

LINK-PP Part Number LP1164NL X Multiple Equivalent XTFZ-M-3007A-C-MOA
Transformer Type LAN Magnetic Transformer Part Status Active
Number of Ports Quad Port (4-Port) Application-LAN Ethernet (Non-PoE)
Speed 10/100BASE-T Mounting Type Surface Mount (SMD)
PIN Count 40 Pins Construction Open Frame
Turns Ratio (RX/TX) 1CT:1CT Configuration (RX/TX) T, C, S
AutoMDX Yes Cores per Port 16
Operating Temperature 0°C to +70°C Packaging Tape & Reel
Package Length (Inches/mm) 1.125 / 28.58 Package Width (Inches/mm) 0.630 / 16.00
Package Height (Inches/mm) 0.260 / 6.60 Standard Compliance IEEE 802.3, UL, RoHS, REACH

Quad-Port 10/100BASE-T Fast Ethernet Discrete LAN Magnetics Module (SMD 40-Pin)

The LINK-PP LP1164NL is a 4-port 10/100BASE-T Fast Ethernet discrete LAN magnetic transformer module manufactured in an open-frame, 40-pin surface-mount (SMD) package. For hardware engineering teams, it provides four independent network channels with a symmetrical 1CT:1CT turns ratio, integrated common-mode chokes, T, C, S configuration, AutoMDX support, and IEEE 802.3-compliant galvanic isolation. For procurement and supply chain managers, the LP1164NL serves as an active, pin-compatible second-source alternative to the X Multiple XTFZ-M-3007A-C-MOA, delivered in Tape & Reel packaging for automated high-volume pick-and-place lines. For OEM and system integration teams, its low 6.60 mm height profile and consolidated quad-port layout optimize vertical space and routing density across industrial PCs (IPCs), machine controllers, satellite communications, and specialized gaming platforms.

Engineered for commercial operating environments (0°C to +70°C), the LP1164NL allows multi-port Ethernet implementations where physical RJ45 connectors need to be decoupled from board-level magnetics. Hardware designers should verify the mechanical drawing, 40-pin land pattern, PHY transceiver application guidelines, and differential routing constraints before finalizing production designs.

Channel Count: Quad-Port (4-Channel) 10/100BASE-T
Package Configuration: 40-Pin SMD (Open Frame)
Direct Cross Reference: X Multiple XTFZ-M-3007A-C-MOA
Turns Ratio: 1CT:1CT (TX & RX)
Packaging Standard: Tape & Reel for Automated SMT
Regulatory Standards: IEEE 802.3, UL, RoHS, REACH

Compatibility and Design Positioning

The LINK-PP LP1164NL is designed as an electrically and mechanically compatible alternative to the X Multiple XTFZ-M-3007A-C-MOA 40-pin quad-port LAN transformer. Both models share matching 1CT:1CT turns ratios across transmit and receive channels, open-frame surface-mount construction, non-PoE operation, and a 4-channel 10/100BASE-T architecture. This alignment allows hardware teams to introduce the LP1164NL into existing BOMs as a qualified second source with minimal layout adjustments. Sourcing and engineering teams should cross-reference pin mapping, pad geometry, and reflow profile requirements against the official LINK-PP technical drawing prior to release.

Quad-Port Discrete Magnetics and High-Density Multi-Channel Routing

Consolidating four Ethernet magnetic circuits into a single surface-mount module offers distinct board-level and enclosure packaging advantages over individual single-port transformers or integrated RJ45 jacks:

  • SMT Placement and BOM Simplification: Replacing four single-port discrete transformers with one 40-pin LP1164NL reduces pick-and-place cycles by 75%, lowering manufacturing assembly time and simplifying BOM management.
  • Connector Independence: Decoupling the magnetic components from the physical I/O jack allows designers to choose non-magnetic modular RJ45 blocks, ruggedized IP67/M12 connectors, optical transceivers, or proprietary interface headers.
  • Symmetrical Multi-Channel Layout: Placing four channels in a compact 28.58 mm × 16.00 mm envelope allows balanced differential pair routing from multi-port PHYs or Ethernet switch ICs, supporting uniform signal timing and EMI behavior.
  • 6.60 mm Low-Profile Clearance: The low vertical profile easily accommodates compact enclosures, 1U rack-mount blades, and space-constrained mezzanine cards where integrated MagJack connectors are too tall.

Internal Magnetics Architecture, 1CT:1CT Turns Ratio, and Signal Integrity

Each channel in the LP1164NL features dedicated 10/100BASE-T magnetics utilizing a 1CT:1CT turns ratio on both transmit (TX) and receive (RX) stages. This ratio ensures broad electrical matching with standard current-mode and voltage-mode Ethernet PHY transceivers.

The internal magnetics incorporate common-mode chokes (CMC) and autotransformer elements in a T, C, S configuration to suppress conducted common-mode noise and maintain high differential signal integrity. The module supports AutoMDX for automatic transmit/receive crossover detection and provides IEEE 802.3-compliant galvanic isolation to protect sensitive host electronics against cable-side voltage surges and ground loop differentials.

Mechanical Envelope and SMT Manufacturing Considerations

When incorporating the 40-pin quad-port surface-mount transformer, hardware layout and production teams should observe the following structural parameters:

1. Package Dimensions and Vertical Clearance

The LP1164NL measures 28.58 mm (1.125 inches) in length, 16.00 mm (0.630 inches) in width, and 6.60 mm (0.260 inches) in height. Its low-profile form factor supports placement beneath daughtercards or within slim chassis.

2. 40-Pin SMD Land Pattern and Coplanarity

The module features 40 gull-wing surface-mount leads distributed across two parallel sides. Accurate solder stencil apertures and pad geometries are necessary to ensure uniform solder volume, lead coplanarity, and minimal bridging risk across adjacent pins during reflow.

3. Open-Frame Construction and Reflow Soldering

The open-frame design reduces overall component mass and ensures uniform thermal distribution during convection reflow. SMT process engineers should verify that lead-free reflow profiles (e.g., SAC305) comply with the temperature and dwell time limits specified in the manufacturer's datasheet.

4. Tape & Reel Packaging for Automated Pick-and-Place

The LP1164NL is packaged in standard Tape & Reel format to integrate into automated surface-mount assembly workflows, minimizing tape-jam downtime and protecting component leads during high-speed feeder operation.

Architecture Comparison: Quad-Port Discrete Transformer vs. Alternative Implementations

Evaluation Metric LP1164NL
Quad-Port SMD Transformer
4× Single-Port Discrete
SMD Transformers
Quad-Port Integrated
RJ45 MagJack (1×4)
Channel Count 4 Channels (Consolidated) 4 Channels (1 Port per package) 4 Channels (Magnetics + Jack combined)
SMT Placements 1 Pick-and-Place Placement 4 Separate Placements 1 Through-Hole / Hybrid Placement
Connector Selection Flexible (RJ45, M12, Headers) Flexible (RJ45, M12, Headers) Fixed (Integrated RJ45 format)
Component Height 6.60 mm (Low Profile) ~5.50 mm – 6.50 mm ~13.50 mm – 25.40 mm
PCB Placement Freedom Centralized inner-board routing Distributed per-channel routing Restricted to PCB edge
Primary Design Focus High-density multi-port discrete layouts Single-channel or modular routing Standardized front-panel RJ45 consolidation

Application Considerations for LP1164NL

Target Application Profile Primary Engineering Consideration
Industrial PCs (IPCs) & Multi-Channel NICs Low 6.60 mm profile allows integration into slim expansion cards and multi-channel embedded controller motherboards.
Factory Automation & Machine Controllers Consolidates four Fast Ethernet channels with 1CT:1CT turns ratio for direct interfacing with multi-port industrial switch silicon.
Satellite & Communication Terminals Enables coupling with custom, ruggedized interface connectors while providing IEEE 802.3 galvanic isolation.
Commercial Gaming & Dedicated Hardware Reduces SMT placement count and provides robust signal isolation in high-reliability multi-port systems.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing procurement using the LP1164NL, engineering teams should verify the following design aspects against official documentation:

  • Pad Pattern and Stencil Design: Check the 40-pin SMD pad pitch, pad length, and stencil aperture dimensions against the official LINK-PP drawing to maintain lead coplanarity and prevent solder bridging.
  • PHY Transceiver Matching: Confirm that the 1CT:1CT turns ratio on both TX and RX lines matches the application circuit requirements of the selected Fast Ethernet PHY.
  • Keep-Out Zone Under Magnetics: Ensure no high-speed digital traces, ground planes, or power planes run underneath the open-frame transformer on the top PCB layer to prevent capacitive coupling and preserve dielectric isolation.
  • Cable-Side Protection Circuitry: Include appropriate Bob Smith termination networks and TVS diode arrays between the transformer outputs and the external connector to suppress electrostatic discharge (ESD) and common-mode transients.
  • Reflow SMT Thermal Profile: Verify that the peak reflow temperature and time-above-liquidus settings match the thermal requirements of the open-frame package construction.
  • Operating Temperature Envelope: Confirm that system operating conditions remain within the specified 0°C to +70°C commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LP1164NL?

The LINK-PP LP1164NL is a quad-port (4-channel) 10/100BASE-T discrete LAN magnetic transformer. It features a 40-pin surface-mount (SMD) open-frame package, 1CT:1CT turns ratio for both transmit and receive, integrated common-mode chokes, AutoMDX support, Tape & Reel packaging, and an operating temperature range of 0°C to +70°C.

Is the LINK-PP LP1164NL compatible with the X Multiple XTFZ-M-3007A-C-MOA?

Yes. The LP1164NL is designed as an electrically and mechanically compatible cross-reference for the X Multiple XTFZ-M-3007A-C-MOA. Both components share a 40-pin SMD open-frame footprint, 1CT:1CT turns ratios, non-PoE 10/100BASE-T performance, and quad-port architectures. SMT footprints and electrical schematics should be verified against official drawings prior to mass production.

What are the main advantages of a quad-port discrete transformer over four individual single-port modules?

A quad-port transformer module consolidates four complete magnetic circuits into a single component, reducing pick-and-place operations from four to one. This shortens SMT assembly time, lowers component handling overhead, simplifies BOM management, and facilitates balanced differential trace lengths between multi-port PHYs and connectors.

Why select a discrete LAN transformer over an integrated RJ45 MagJack?

Discrete LAN transformers provide the flexibility to use custom or ruggedized connectors (such as M12, IP67 circular, or backplane headers) rather than standard RJ45 jacks. Additionally, with a package height of only 6.60 mm, discrete SMD modules fit inside low-profile enclosures and daughterboards where integrated RJ45 jacks would exceed vertical height limits.

Can the LP1164NL be used in Power over Ethernet (PoE) applications?

No. The LP1164NL is specified for non-PoE Ethernet applications. Its internal magnetic windings and chokes are designed for Fast Ethernet differential data transmission and galvanic isolation, and are not rated to handle the DC bias currents required by PoE standards (IEEE 802.3af/at/bt).

What layout guidelines apply to the PCB area underneath the LP1164NL?

A strict copper keep-out zone should be maintained directly under the LP1164NL footprint on the top PCB layer. High-speed signal lines, ground planes, and power planes should not be routed beneath the open-frame magnetics to prevent capacitive noise coupling and ensure proper galvanic isolation between the PHY and cable interfaces.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download