HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP1164NL.jpg
  • LP1164NL1.jpg

LP1164NL Quad Port 10/100 BASE-T 40 Pin SMD Ethernet Power Transformer Price

P/N:

LP1164NL

Manufacturer:

LINK-PP

Compatible Brand:

LINK-PP

Compatible P/N:

LP1164NL

  • Compatible Brands: X Multiple
  • Data Rate: 10 BASE-T,100 BASE-TX
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: 0℃ TO +70℃
  • Application -LAN: ETHERNET(Non PoE)
  • P/N: LP1164NL
  • Manufacture: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LP1164NL

Packaging Details:

N.W/pCS:

0.005kg

Package:

Reel

SPQ:

400pcs

Qty/carton:

1600pcs

Carton size:

36*35.5*23cm

G.W/carton:

7.5kg

Product Specifications

LINK-PP Part Number LP1164NL Transformer Type LAN Transformer
Part Status Active Turns Ratio - Primary: Secondary 1:1 Transmitter, 1:1 Receiver
Construction Open Frame Application-LAN Ethernet (Non-PoE)
Number of Ports Quad Port Speed 10/100BASE-T
Package Tape & Reel Cores per Port 16
AutoMDX Yes Comment Same as NL Version
PIN Number 40 Mounting Type Surface Mount
Package Height (Inches/mm) 0.260 / 6.60 Package Length (Inches/mm) 1.125 / 28.58
Package Width (Inches/mm) 0.630 / 16.00 Temperature 0°C to +70°C
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C, S

Quad-Port 10/100BASE-T Surface-Mount Discrete LAN Transformer Module for Non-PoE Applications

The LINK-PP LP1164NL is a quad-port discrete 10/100BASE-T Fast Ethernet LAN transformer module specified for non-PoE network hardware. For hardware engineers, it consolidates four independent Fast Ethernet channels into a single 40-pin surface-mount package, featuring a 1CT:1CT turns ratio (T, C, S configuration), AutoMDX support, and physical-layer electrical isolation. For OEM and procurement teams, the LP1164NL provides a consolidated discrete magnetic sourcing option that reduces SMT pick-and-place component count on multi-port network boards while offering standard Tape & Reel packaging.

Featuring an open-frame construction, a 6.60 mm package height, and an operating temperature range of 0°C to +70°C, the module is suited for multi-port hubs, SOHO switches, LAN-on-Motherboard (LOM) designs, and embedded communication systems. Engineering and procurement teams should verify the mechanical drawing, pin assignment, PCB land pattern, and selected PHY documentation before production release.

Ethernet Interface: 10/100BASE-T Fast Ethernet
Port Density: Quad Port (4 Channels Consolidated)
Turns Ratio: 1CT:1CT (1:1 TX / 1:1 RX)
Package / Mounting: 40-Pin SMD (Open Frame)
Operating Temperature: 0°C to +70°C Commercial
Packaging Format: Tape & Reel

Compatibility and Design Positioning

The LP1164NL can be evaluated as an alternative sourcing option for quad-port 10/100BASE-T Fast Ethernet discrete magnetics designs where the required package dimensions, pinout footprint, turns ratio, and electrical isolation characteristics match the target design. Engineering and procurement teams should cross-reference the official mechanical drawing and electrical documentation before production release.

Quad-Port Density and 10/100BASE-T Physical Layer Coupling

Consolidating multiple Fast Ethernet channels into a single surface-mount module provides layout and routing advantages for multi-port networking equipment:

  • Four-Channel Integration: Consolidating four Fast Ethernet channels into one physical 28.58 mm by 16.00 mm package streamlines routing between multi-port PHY transceivers and external RJ45 connectors, reducing component placement area compared to using four separate single-port modules.
  • Non-PoE Data Architecture: The module is specified for non-PoE 10/100BASE-T applications, dedicating the internal magnetic layout entirely to differential data transmission without high-current DC power paths.
  • Symmetrical Coupling & AutoMDX: Incorporates a symmetrical 1CT:1CT turns ratio across transmit and receive channels with T, C, S configuration, supporting AutoMDX-compatible Fast Ethernet PHY implementations.

Mechanical and PCB Surface-Mount Considerations

Physical mounting and board layout are critical factors when implementing multi-channel discrete LAN magnetics:

1. 40-Pin Open-Frame Package

The open-frame construction provides a vertical height of 6.60 mm (0.260 inches) with a footprint of 28.58 mm by 16.00 mm. This surface-mount package provides accessible lead inspection after reflow soldering.

2. Tape & Reel Packaging for SMT Assembly

Supplied in Tape & Reel format, the LP1164NL is engineered for automated high-speed pick-and-place equipment and standard surface-mount assembly workflows.

3. PCB Land Pattern and Pinout Verification

The module incorporates a 40-pin SMD footprint. Because pin arrangements and internal schematic connections can differ between manufacturers, engineers should confirm the land pattern, pin pitch, and schematic against official product drawings prior to finalizing board artwork.

Discrete Transformer vs. Integrated MagJack Solutions

Selecting between a discrete LAN transformer and an integrated MagJack involves several hardware design trade-offs:

  • Layout and Placement Flexibility: Discrete transformers allow engineers to place the magnetics independently on the PCB, optimizing the physical separation between the host PHY and the board edge.
  • Connector Selection Freedom: A discrete transformer architecture allows the design to be paired with separate RJ45 connectors, including 1x4 horizontal ganged jacks, 2x2 stacked connectors, or specialized enclosure-specific interfaces.
  • Thermal Separation: Separating the transformer from the physical I/O connector helps distribute heat dissipation across the board rather than concentrating thermal load at the front-panel connector cavity.

Architecture Comparison: Quad-Port Fast Ethernet Transformer vs. Alternative Implementations

Evaluation Metric LP1164NL
Quad-Port 10/100 SMD Transformer
4 x Single-Port
10/100 SMD Transformers
Quad-Port Integrated
10/100 MagJack
Channel Integration Quad Port (4 Channels Consolidated) Single channel per component Quad port integrated with RJ45
Ethernet Data Rate 10/100BASE-T (Fast Ethernet) 10/100BASE-T (Fast Ethernet) 10/100BASE-T
Mounting Technology Surface Mount (40-Pin SMD) Surface Mount (SMD) Through-Hole (THT)
Operating Temperature 0°C to +70°C Model-dependent Model-dependent
I/O Connector Selection Independent (Can be paired with separate RJ45 connectors) Independent Fixed by connector assembly
Primary Design Focus Consolidates four 10/100 channels for SMT assembly Higher placement area required Consolidates jack and magnetics into one component

Application Considerations for LP1164NL

Target Application Profile Primary Engineering Consideration
Multi-Port SOHO Switches & Network Hubs Consolidates four Fast Ethernet channels, simplifying multi-port board routing and SMT assembly.
LAN-on-Motherboard (LOM) Architectures Provides physical-layer galvanic isolation and signal coupling directly on multi-channel embedded mainboards.
ADSL Modems & Broadband Gateways 40-pin surface-mount package fits multi-port home and commercial gateway layouts.
Embedded Multi-Channel Controllers Independent placement allows optimized trace routing between quad-PHY transceivers and front-panel I/O.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LP1164NL, hardware engineers should confirm the following design parameters against the official datasheet:

  • Package Dimensions & Vertical Clearance: Verify the 6.60 mm height, 28.58 mm length, and 16.00 mm width against enclosure or card envelope limits.
  • Pinout and Schematic Alignment: Verify the 40-pin terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • PCB Land Pattern: Check pad dimensions, pitch, and solder mask clearances for the 40-pin footprint on the manufacturer's recommended layout.
  • Quad-PHY Differential Routing: Ensure controlled-impedance differential trace routing and AutoMDX compatibility across all four Fast Ethernet channels.
  • Thermal Operating Environment: Confirm that the component operating environment remains within the specified 0°C to +70°C range.
  • SMT Process Compatibility: Verify Tape & Reel feeder setup and convection reflow profiles for the open-frame package.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LP1164NL?

The LP1164NL is a quad-port discrete 10/100BASE-T Fast Ethernet LAN transformer module. It features a 40-pin SMD open-frame package, 1CT:1CT turns ratio (1:1 TX / 1:1 RX), T, C, S configuration, non-PoE data routing, and an operating temperature range of 0°C to +70°C, supplied in Tape & Reel format.

What is the design advantage of a quad-port discrete LAN transformer?

A quad-port discrete transformer consolidates four Fast Ethernet magnetic channels into a single 28.58 mm x 16.00 mm footprint. This reduces component placement count, streamlines PCB differential trace routing directly from multi-port PHY transceivers, and preserves board area compared to four separate single-port modules.

What turns ratio and internal configuration does this transformer use?

The module features a symmetrical 1CT:1CT turns ratio across transmit and receive channels with a T, C, S internal configuration, compatible with standard Fast Ethernet PHY transceiver specifications.

Is the LP1164NL suitable for Power over Ethernet (PoE)?

No. The LP1164NL is specified as a Non-PoE transformer optimized solely for 10/100BASE-T differential data communication. For systems requiring PoE power delivery, a transformer with dedicated PoE-rated center-tap power paths should be selected.

Does the LP1164NL support AutoMDX?

Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected PHY interface and complete reference design before production use.

What is the operating temperature range for the LP1164NL?

The LP1164NL is rated for a commercial operating temperature range of 0°C to +70°C, suited for enterprise networking equipment, hubs, SOHO switches, and standard commercial hardware.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download