Pulse Transformers H5019NL Low Profile Compatible LP5019NL 1000 Base-T Transformers
P/N:
LP5019NL
Manufacturer:
LINK-PP
Compatible Brand:
Pulse
Compatible P/N:
H5019NL
- Compatible Brands: Pulse
- Data Rate: 1000 BASE-T
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: 0℃ TO +70℃
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP5019NL
- Manufacture: LINK-PP
- Compatible Brand: Pulse
- Compatible P/N: H5019NL
Product Specifications
| LINK-PP Part Number | LP5019NL | Pulse Part Number | H5019NL |
| Part Status | Active | Transformer Type | Lan Transformer |
| Construction | OPEN FRAME | Application-Lan | Ethernet(Non PoE) |
| Number of Ports | Single Port | Speed | 10/100/1000 Base-T |
| Package | Tape & Reel | Cores per Port | 12 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN Number | 28 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.100/2.54 | Package Length (Inches/mm) | 0.780/19.81 |
| Package Width (Inches/mm) | 0.782/19.86 | Temperature | 0℃ TO +70℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C, S |
LINK-PP LP5019NL Technical & Compatibility Overview
The LINK-PP LP5019NL is a single-port 28-pin surface-mount (SMD/SMT) 10/100/1000BASE-T Gigabit Ethernet LAN magnetic transformer module featuring an ultra-low-profile package height of 2.54mm (0.100 in). Engineered as a functional and footprint-compatible alternative to the Pulse Electronics H5019NL, it incorporates an enhanced 12-core magnetic assembly (1CT:1CT turns ratio) in an open-frame construction, delivered in Tape & Reel packaging for automated SMT pick-and-place assembly across a commercial operating temperature range of 0°C to +70°C.
- Footprint & Schematic Alignment: Designed for footprint and pinout compatibility with Pulse H5019NL, supporting direct board-level evaluation and secondary sourcing.
- Ultra-Low-Profile 2.54mm Height: Reduced 0.100-inch package height optimizes vertical clearance in low-profile PCIe cards, mezzanine modules, and slim network appliances.
- 12-Core Gigabit Magnetic Matrix: Integrates a 12-core transformer/choke structure across 4 differential pairs to provide superior common-mode noise suppression per IEEE 802.3ab standards.
- 28-Pin SMT Open-Frame Construction: Gull-wing lead layout in Tape & Reel format for automated high-volume SMT reflow soldering.
Key Design Benefits
- Ultra-Thin Vertical Clearance Optimization: The 2.54mm (0.100 in) height profile allows installation in space-constrained embedded mainboards, slim routers, and low-profile NICs.
- 12-Core Magnetic Filtering Topology: Incorporates 12 magnetic cores to optimize signal coupling, common-mode noise filtering, and galvanic isolation across Gigabit Ethernet lines.
- Automated Pick-and-Place Efficiency: Open-frame 28-pin gull-wing lead design packaged in Tape & Reel streamlines high-speed SMT assembly and reflow soldering.
- Galvanic Isolation & Signal Balance: Integrated isolation transformers provide 1.5 kVrms dielectric isolation and 350 µH minimum open-circuit inductance (OCL) to safeguard host PHY transceivers.
- Second-Source Supply Continuity: Offers hardware engineering and procurement teams a pin-compatible alternative to mitigate component lead times and supply chain single-point risks.
Integrated Magnetics & Electrical Architecture
The LP5019NL integrates 10/100/1000BASE-T Gigabit magnetics into a discrete 28-pin SMT module, reducing the need for long differential trace runs to PHY transceivers on the motherboard.
12-Core Gigabit Transformer Matrix
The integrated magnetic assembly utilizes an enhanced 12-core topology across all 4 differential pairs with a 1CT:1CT turns ratio. This structure provides galvanic isolation between PHY transceivers and network media while suppressing common-mode noise across 10/100/1000BASE-T frequencies up to 100 MHz.
Differential Signal Balance
Center-tapped primary and secondary windings maintain balanced differential signaling across all four transmit/receive channels per IEEE 802.3ab specifications, minimizing differential-to-common-mode noise conversion.
Mechanical Specifications & SMT Layout
The LP5019NL features standard package dimensions of 2.54mm (H) x 19.86mm (W) x 19.81mm (L) [0.100 x 0.782 x 0.780 in]. The 28-pin SMT Gull-Wing lead layout is designed for Tape & Reel automated pick-and-place assembly and standard Pb-free reflow soldering profiles.
Target Applications
- Enterprise Routers & Network Switches: High-density 1 Gbps LAN magnetic isolation for commercial routers, enterprise switches, and firewall gateways.
- Server Network Interface Cards (NICs): Low-profile 2.54mm SMT Gigabit transformer for high-density PCIe add-in cards and mezzanine expansion modules.
- Embedded Mainboards & Industrial PCs: Reliable 10/100/1000 Mbps LAN signal isolation for compact single-board computers and IPC mainboards.
Pulse H5019NL Replacement Compatibility Checklist
When evaluating the LINK-PP LP5019NL as an alternative to Pulse Electronics H5019NL, hardware engineers should verify the following parameters against their system specification:
- Schematic & Pinout Alignment: Confirm that your 28-pin SMT Gigabit LAN layout matches the 12-core 1CT:1CT primary/secondary turns ratio and center-tap configuration.
- Package Footprint & Height: Verify that the 28-pin SMT pad layout and 2.54mm package height fit your PCB vertical clearance requirements.
- Non-PoE Requirement: Confirm that your LAN port design utilizes non-PoE Gigabit Ethernet signal magnetics.
- Thermal Class Verification: Confirm that the 0°C to +70°C commercial temperature rating satisfies your operating environment.
Frequently Asked Questions
Is LINK-PP LP5019NL a pin-compatible alternative for Pulse H5019NL in 10/100/1000BASE-T designs?
Yes. The LP5019NL is engineered with matching 28-pin SMT pad layout, 12-core 1CT:1CT Gigabit magnetics configuration, 0°C to +70°C operating temperature rating, and an ultra-low-profile 2.54mm package height to serve as a functional drop-in footprint alternative for Pulse H5019NL.
What is the primary advantage of the LP5019NL's 2.54mm ultra-low package height?
At just 2.54mm (0.100 inches) in height, the LP5019NL is an ultra-thin Gigabit LAN transformer, allowing hardware engineers to maximize vertical clearance in low-profile PCIe NICs, slim routers, and space-constrained embedded mainboards.
What CAD and engineering validation assets are available for Pulse H5019NL cross-reference checking?
LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.
How can procurement and engineering teams request samples or a quotation for LP5019NL as an alternative to Pulse H5019NL?
Procurement and engineering teams can contact LINK-PP to request LP5019NL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support for replacing Pulse H5019NL.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































