LP74801ANL Dual Port 10G Base -T 48 Pin Surface Mount Lan Transformer Magnetic Modules
P/N:
LP74801ANL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LP74801ANL
- Compatible Brands: LINK-PP
- Data Rate: 10G BASE-T
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP74801ANL
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LP74801ANL
Product Specifications
| LINK-PP Part Number | LP74801ANL | Transformer Type | LAN Magnetic Transformer |
| Part Status | Active | Mounting Type | Surface Mount (SMD) |
| Number of Ports | Dual Port (2-Port) | Application-LAN | Ethernet (Non-PoE) |
| Speed | 10GBASE-T | PIN Count | 48 Pins |
| Construction | Open Frame | Cores per Port | 16 |
| Turns Ratio (Primary:Secondary) | 1:1 TX / 1:1 RX (1CT:1CT) | Configuration (RX/TX) | T, C, S |
| AutoMDX | Yes | Operating Temperature | -40°C to +85°C (Industrial) |
| Package Length (Inches/mm) | 1.094 / 27.80 | Package Width (Inches/mm) | 0.598 / 15.20 |
| Package Height (Inches/mm) | 0.284 / 7.21 | Packaging | Tape & Reel |
| Comment | Same as NL Version | Standard Compliance | IEEE 802.3, RoHS, UL |
Dual-Port 10GBASE-T Discrete LAN Transformer
The LINK-PP LP74801ANL is an industrial-grade dual-port 10GBASE-T Ethernet discrete LAN magnetic transformer module in a 48-pin surface-mount (SMD) open-frame configuration. Designed with an internal 16-core-per-port magnetic architecture (32 cores total), 1CT:1CT turns ratio, integrated T, C, S choke and autotransformer structure, and AutoMDX support, the module supports 10 Gbps Ethernet signal isolation and common-mode noise suppression across the specified -40°C to +85°C operating temperature range.
The component features an open-frame surface-mount body measuring 7.21 mm in height, 15.20 mm in width, and 27.80 mm in length, supplied in standard Tape & Reel packaging for automated high-speed SMT assembly. With a non-PoE data architecture and two independent 10G channels, the LP74801ANL provides high-density board-level magnetics suited for enterprise servers, multi-port 10GbE network interface cards (NICs), high-speed switching fabrics, and industrial computing appliances.
Compatibility and Design Positioning
The LP74801ANL can be evaluated as an alternative sourcing option for standard 48-pin SMD dual-port 10GBASE-T LAN transformer modules. It provides direct design relevance for high-speed hardware layouts requiring surface-mount placement, a 1CT:1CT turns ratio on both transmit and receive channels across two 10G ports, open-frame construction, and an industrial -40°C to +85°C operating temperature rating. Engineering teams should cross-reference pin assignments, land pattern dimensions, reflow soldering limits, and PHY transceiver interface guidelines against the official LINK-PP technical drawing before approving component substitution.
Procurement and OEM Qualification
For sourcing teams and OEM engineering programs evaluating the LP74801ANL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, SMT solder pad coplanarity, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.
Dual-Port High-Speed Discrete Topology and Layout Optimization
Implementing dual-port 10GBASE-T magnetics in a discrete surface-mount module provides distinct layout and mechanical packaging advantages for multi-gigabit computing platforms:
- SMT Placement and Board-Space Efficiency: Consolidating two 10G ports into a single 48-pin SMD module reduces pick-and-place machine cycles by 50% compared to deploying two separate single-port transformers, streamlining automated board assembly.
- Connector Selection Freedom: Decoupling the magnetic components from the physical I/O jack allows hardware designers to choose custom connector solutions, such as stacked 2×1 RJ45 blocks, ruggedized circular connectors, or high-density backplane interfaces.
- 7.21 mm Vertical Height: The 7.21 mm component height fits within standard low-profile PCI Express add-in cards, 1U server blades, and space-constrained mezzanine modules where tall integrated connectors cannot be accommodated.
- -40°C to +85°C Industrial Operating Range: The -40°C to +85°C specification defines the stated operating temperature range of the module, supporting reliable link operation in dense server chassis and industrial cabinets subject to elevated internal temperatures.
- Tape & Reel Packaging: Standard Tape & Reel packaging supports automated high-speed SMT feeder workflows, protecting lead coplanarity and preventing manual handling damage during production.
Internal Magnetics Architecture, 10GBASE-T Signaling, and AutoMDX
The LP74801ANL incorporates an internal magnetic architecture utilizing 16 cores per port (32 cores total across the module) to support the high-frequency differential signaling required for 10GBASE-T full-duplex Ethernet transmission. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C, S configuration enables broad interface compatibility with standard voltage-mode and current-mode 10G PHY transceivers.
The internal magnetics combine isolation transformers, common-mode chokes, and autotransformer elements to suppress high-frequency conducted and radiated EMI while maintaining return loss and insertion loss compliance up to 500 MHz. AutoMDX support enables automatic differential pair crossover detection. Electrical isolation complies with IEEE 802.3 specifications as defined in the product documentation, separating PHY circuitry from line-side transients and cable common-mode noise. The non-PoE data architecture is optimized exclusively for differential high-speed data transmission without DC bias heating.
Mechanical Envelope and SMT Manufacturing Considerations
When integrating the LP74801ANL into high-speed multi-layer PCB layouts, engineering teams should observe the following structural and manufacturing guidelines:
1. Package Dimensions and Vertical Clearance
The module body measures 27.80 mm (1.094 inches) in length, 15.20 mm (0.598 inches) in width, and 7.21 mm (0.284 inches) in height. Designers should confirm that PCB component spacing accommodates the 48-pin surface-mount footprint and allows adequate clearance for automated optical inspection (AOI).
2. 48-Pin SMD Land Pattern and Coplanarity
The module features 48 gull-wing leads arranged along two parallel rows. Accurate solder stencil aperture design and precise solder paste volume are critical to ensure uniform solder fillets across all 48 leads, maintain lead coplanarity, and avoid solder bridging between adjacent fine-pitch pins.
3. Open-Frame Construction and Convection Reflow Profile
The open-frame structure minimizes overall component mass and ensures uniform thermal distribution during convection reflow. SMT process engineers should configure the lead-free reflow curve (e.g., SAC305) in accordance with IPC/JEDEC J-STD-020 standards, observing the specified maximum peak temperature and time-above-liquidus limits.
4. Tape & Reel Packaging for Automated Assembly
Supplied in standard Tape & Reel format, the LP74801ANL is designed for automated pick-and-place equipment using standard vacuum nozzles. Proper reel storage and moisture handling according to the product MSL classification prevent solderability degradation during production runs.
Design Consideration Comparison: Dual-Port Discrete Transformer vs. Alternative Implementations
| Design Consideration | LP74801ANL Dual-Port 10G SMD Transformer |
2× Single-Port Discrete 10G Transformers |
Dual-Port Integrated RJ45 MagJack (2×1) |
|---|---|---|---|
| Channel Integration | Two 10G ports in one 48-pin SMD module | Two separate discrete transformer packages | Two 10G ports integrated with RJ45 connector cavity |
| PCB Assembly Operations | Single SMT placement | Two individual SMT placements | Single through-hole / hybrid placement |
| Physical Connector Flexibility | Complete flexibility (RJ45, custom headers, backplanes) | Complete flexibility (RJ45, custom headers, backplanes) | Fixed RJ45 port geometry and front-panel alignment |
| Vertical Height Envelope | 7.21 mm (Low vertical clearance) | ~6.50 mm – 7.50 mm | ~25.40 mm – 28.00 mm (Stacked 2×1 profile) |
| High-Speed PCB Placement | Inner-board placement adjacent to 10G PHY | Distributed placement adjacent to 10G PHY | Restricted to physical board-edge alignment |
| Primary Engineering Focus | High-density dual-port 10G discrete routing | Single-port modular or dispersed layouts | Standardized front-panel RJ45 consolidation |
Application Considerations for LP74801ANL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Enterprise Servers & Multi-Port 10G NICs | Compact 7.21 mm height supports low-profile PCI Express add-in cards; dual-port layout optimizes SMT assembly efficiency. |
| High-Density 10G Ethernet Switches & Routers | Consolidating two ports in one package enables symmetrical differential pair routing to multi-channel 10G PHY transceivers. |
| Industrial Edge Computing & High-Bandwidth Gateways | -40°C to +85°C rating supports reliable 10 Gbps throughput in unconditioned industrial control cabinets. |
| Data Center Top-of-Rack (ToR) Networking | Open-frame SMT format provides thermal dissipation and IEEE 802.3 signal isolation under high-volume data traffic. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials using the LP74801ANL, hardware engineers should confirm the following design parameters against official documentation:
- SMD Footprint and Pad Geometry: Verify 48-pin pad dimensions, pitch spacing, and solder mask expansion against the official LINK-PP LP74801ANL footprint drawing.
- PHY Transceiver Compatibility: Confirm that the 1CT:1CT turns ratio on transmit and receive stages matches the reference schematic of the selected 10GBASE-T PHY.
- Top-Layer PCB Keep-Out Zone: Ensure that an unbroken copper keep-out zone is maintained directly beneath the open-frame module on the top PCB layer to prevent capacitive noise coupling.
- External Connector Protection & Termination: Place Bob Smith termination networks and high-speed TVS diode arrays near the physical RJ45 connector interface to suppress ESD and common-mode transients.
- SMT Reflow Profile Compliance: Verify that the assembly facility's convection reflow thermal profile adheres to standard lead-free soldering thresholds for 48-pin open-frame components.
- Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified -40°C to +85°C industrial temperature range under sustained data traffic.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LP74801ANL?
The LP74801ANL is an industrial-grade dual-port 10GBASE-T discrete LAN magnetic transformer module. It features a 48-pin surface-mount (SMD) open-frame construction, 16 magnetic cores per port (32 cores total), a 1CT:1CT turns ratio for both transmit and receive stages, AutoMDX support, Tape & Reel packaging, and an operating temperature range of -40°C to +85°C.
Can the LP74801ANL be evaluated as an alternative sourcing option in existing designs?
Yes. The LP74801ANL can be evaluated as a second-source or BOM alternative for standard 48-pin SMD dual-port 10GBASE-T LAN transformers. Engineering teams should cross-reference pinout mapping, land pattern dimensions, 1CT:1CT turns ratios, and package dimensions against official manufacturer drawings before approving component substitution.
What are the engineering advantages of a dual-port discrete 10G transformer over two single-port modules?
A dual-port transformer module consolidates two complete 10G magnetic circuits into a single SMD package. This reduces pick-and-place machine operations by 50%, lowers component handling overhead, simplifies bill of materials management, and facilitates balanced differential trace routing between dual-port 10G PHYs and external connectors.
Why choose a discrete 10G transformer instead of an integrated 10G RJ45 MagJack?
Discrete LAN transformers allow hardware designers to place the magnetics directly adjacent to the PHY transceiver for optimal differential signal routing, while retaining complete flexibility in connector selection (such as custom RJ45 blocks, circular IP67 connectors, or backplane headers). Furthermore, with a height of only 7.21 mm, discrete modules fit into low-profile expansion cards where integrated MagJacks are physically too tall.
Is the LP74801ANL suitable for Power over Ethernet (PoE) applications?
No. The LP74801ANL is specified as a Non-PoE module for high-speed differential Ethernet data communication. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required PoE standard and DC current conditions should be selected.
What PCB layout guidelines apply beneath the LP74801ANL footprint?
A strict copper keep-out zone should be maintained directly under the LP74801ANL footprint on the top PCB layer. No high-speed digital traces, ground planes, or power planes should run beneath the open-frame magnetics to prevent capacitive noise coupling and preserve dielectric isolation between PHY-side and cable-side circuits.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































