HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP5004NL.jpg
  • LP5004NL1.jpg

WE 749020010 Compatible LINK-PP LP5004NL 10/100/1000 Base-T Single Port SMD 24PIN Discrete Magnetic Transformer

P/N:

LP5004NL

Manufacturer:

LINK-PP

Compatible Brand:

WE

Compatible P/N:

749020010

  • Compatible Brands: Wurth
  • Data Rate: 1000 BASE-T
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: -40℃ TO +85°C
  • Application -LAN: ETHERNET(Non PoE)
  • P/N: LP5004NL
  • Manufacture: LINK-PP
  • Compatible Brand: WE
  • Compatible P/N: 749020010

Packaging Details:

N.W/pCS:

0.003kg

Package:

Reel

SPQ:

400pcs

Qty/carton:

1600pcs

Carton size:

37*37*25cm

G.W/carton:

5.5kg

Product Specifications

LINK-PP Part Number LP5004NL WE Part Number 749020010
Part Status Active Transformer Type Lan Transformer
Construction OPEN FRAME Application-Lan Ethernet(NoN PoE)
Number of Ports Single Port Speed 10/100/1000 Base-T
Package Tape & Reel Cores per Port 8
AutomDX Yes Comment SAME AS NL VERSION
PIN Number 24 Mounting Type Surface Mount
Package Height (Inches/mm) 0.260/6.60 Package Length (Inches/mm) 0.697/17.70
Package Width (Inches/mm) 0.622/15.80 Temperature -40℃ TO +85℃
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C,S

WE 749020010 / 24SH10410 HF Compatible LINK-PP LP5004NL Gigabit 8-Core SMT LAN Transformer Technical Overview

The LINK-PP LP5004NL (engineered as a direct 100% SMT footprint and electrical drop-in replacement for Würth Elektronik WE 749020010 and 24SH10410 HF) is an industrial-grade 24-pin single-port 10/100/1000 Base-T discrete LAN magnetics module featuring an open-frame SMT construction, a 6.60mm [.260 in] package height, and T,C,S circuit topology. Compliant with IEEE 802.3ab Gigabit Ethernet standards, its 8-core transformer/choke matrix (1CT:1CT turns ratio across 4 differential pairs) delivers 1 Gbps full-duplex data transmission, 1500Vrms isolation, common-mode noise suppression, and extended operating temperature reliability from -40°C to +85°C for embedded mainboards, industrial PCs, automation controllers, and game controllers.

  • Gigabit Ethernet Signal Ecosystem: 24-pin single-port SMT discrete LAN transformer module integrated with an 8-core magnetic matrix (1CT:1CT turns ratio) delivering 1000BASE-T (1 Gbps) full-duplex communication over 4 differential pairs and 1500Vrms isolation.
  • Advanced T,C,S Magnetic Topology: Engineered with Transformer (T), Common-mode Choke (C), and Shunt Autotransformer (S) elements across 4 differential pairs for low insertion loss and high return loss up to 100 MHz.
  • Industrial Temperature Endurance (-40°C to +85°C): Certified for an extended operating temperature range of -40°C to +85°C (-40°F to +185°F) for industrial PCs, embedded mainboards, automation PLCs, and game controllers.
  • Direct Cross-Reference Replacement & Tape & Reel: Fully qualified footprint and electrical drop-in replacement for WE 749020010 and 24SH10410 HF, packaged in Tape & Reel for automated Pick & Place reflow assembly.

LINK-PP LP5004NL Gigabit LAN Transformer Overview

LINK-PP LP5004NL is a 24-pin single-port discrete SMT Gigabit Ethernet LAN transformer module designed for high-density networking hardware where isolation transformers are separated from RJ45 connectors on the PCB. Featuring an open-frame construction, a 1:1 transmit and receive turns ratio, and an 8-core magnetic matrix in a T,C,S topology, this module provides 1500Vrms isolation and EMI suppression for Gigabit PHY transceivers. Packaged in Tape & Reel for automated SMT manufacturing, it serves as a fully qualified secondary-source replacement for WE 749020010 and 24SH10410 HF in embedded mainboards, industrial PCs, I/O controllers, and interactive arcade game controllers.

Key Benefits of LINK-PP LP5004NL / WE 749020010 Compatible SMT LAN Transformer

  • Full 1000BASE-T Gigabit Speed (IEEE 802.3ab): Embeds an 8-core transformer and common-mode choke matrix that isolates and filters 4 differential pairs, ensuring clean 1 Gbps eye diagrams with minimal differential insertion loss.
  • Discrete Magnetics Architecture Provides Layout Flexibility: Placing discrete transformers directly on the motherboard allows hardware engineers to optimize PHY-to-connector trace routing, implement custom surge protection networks, or use non-magnetic RJ45 connectors.
  • Surface Mount (SMT) Open-Frame Design Streamlines Reflow Assembly: Eliminates through-hole wave soldering steps on dual-sided SMT PCBs, supporting 100% automated Pick & Place reflow soldering up to 260°C peak.
  • T,C,S Circuit Configuration for Superior Signal Integrity: Combines isolation transformers (T), common-mode chokes (C), and shunt autotransformers (S) to minimize insertion loss and suppress high-frequency EMI radiation.
  • Industrial Operating Temperature Range (-40°C to +85°C): Constructed with high-grade FR4 substrate and open-frame housing to withstand severe thermal fluctuations in unconditioned outdoor equipment and factory automation cabinets.
  • Direct Second Sourcing for WE 749020010 & 24SH10410 HF: Identical 24-pin SMT pad land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.

Discrete LAN Magnetics & 1000BASE-T Signal Architecture

In high-performance embedded systems, hardware architects specify discrete 1000BASE-T LAN magnetics modules like the LINK-PP LP5004NL to satisfy custom PHY isolation or space-restricted board layouts.

8-Core Gigabit Transformer & Choke Configuration

Featuring a 1CT:1CT transmit and receive turns ratio with 8 magnetic cores per port, the LP5004NL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 8-core layout provides precise impedance matching and common-mode choke filtering across all 4 differential pairs required for 1000BASE-T, suppressing inter-pair crosstalk and common-mode noise.

24-Pin SMT Open Frame Package & Reflow Assembly

The 24-pin open-frame construction provides a package height of 6.60mm [.260 in] while allowing natural air convection around the toroidal ferrite cores. The SMT lead coplanarity is strictly maintained within 0.10mm, ensuring error-free SMT solder paste reflow and high manufacturing yields.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole/SMT assembly, the LP5004NL combines an industry-standard footprint with high terminal coplanarity.

Package Footprint & Automation Assembly

With package dimensions of 6.60mm H x 17.70mm L x 15.80mm W, the 24-pin layout provides precise pin pitch for surface-mount soldering on FR4 PCBs. Supplied in Tape & Reel packaging, the LP5004NL feeds seamlessly into automated placement machines, minimizing manual handling and production costs.

Target Applications: Embedded Mainboards, Industrial PCs, and Game Controllers

Combining IEEE 802.3ab Gigabit compliance, 24-pin SMT open-frame density, T,C,S noise suppression, and WE 749020010 / 24SH10410 HF compatibility, the LINK-PP LP5004NL supports diverse embedded platforms:

  • Embedded Mainboards & Industrial Single Board Computers (SBCs): Ideal for industrial single-board computers, embedded mainboard diagnostic ports, and custom PHY interface cards.
  • Industrial I/O Controllers & Automation PLCs: Deployed in industrial PLC I/O expansion modules, smart building automation controllers, and fieldbus interfaces.
  • Interactive Game Controllers & Arcade Consoles: Suitable for commercial arcade controllers, interactive gaming terminals, and network offload engines.

How to Select and Verify LP5004NL vs. WE 749020010

Hardware design engineers and procurement specialists evaluating the LINK-PP LP5004NL as a second-source replacement for WE 749020010 / 24SH10410 HF should verify the following core parameters:

  • 24-Pin SMT Pad Footprint Alignment: Confirm that the 24-pin SMT land pattern, lead pitch, and overall package dimensions (17.70mm L x 15.80mm W) match the WE 749020010 / 24SH10410 HF PCB layout.
  • 8-Core Gigabit Magnetics Compatibility: Confirm that an 8-core magnetic matrix (4 differential pairs) and a 1CT:1CT turns ratio match your Gigabit Ethernet PHY transceiver reference design.
  • Reflow Thermal Profile Compatibility: Ensure your contract manufacturer's SMT reflow oven temperature profile does not exceed the 260°C peak temperature limit of the LCP/FR4 housing.
  • Operating Temperature Envelope: Confirm that the -40°C to +85°C industrial temperature rating satisfies your product's environmental specification.

Frequently Asked Questions

Is LINK-PP LP5004NL compatible with WE 749020010 and 24SH10410 HF?

Yes. LINK-PP LP5004NL is a direct 24-pin SMT footprint, electrical, and functional drop-in replacement for WE 749020010 and 24SH10410 HF, featuring the same 1000BASE-T Gigabit discrete LAN transformer layout and -40°C to +85°C temperature range.

What is the difference between a discrete LAN transformer and an RJ45 Magjack?

A discrete LAN transformer (like LP5004NL) is a standalone magnetic module placed on the PCB between the PHY chip and a separate RJ45 jack. An RJ45 Magjack integrates these magnetics directly inside the metal RJ45 jack housing. Discrete transformers allow greater board layout flexibility and custom isolation.

What speed and protocols are supported by LP5004NL?

LP5004NL supports 10/100/1000 Base-T Gigabit Ethernet data rates compliant with IEEE 802.3ab standards, complete with Auto-MDIX support across 4 differential pairs.

What is the operating temperature range of LP5004NL?

LINK-PP LP5004NL is rated for an extended industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and factory automation systems.

How is LP5004NL packaged for automated manufacturing?

LP5004NL is supplied in Tape & Reel format for automated SMT Pick & Place feeders, supporting lead-free SMT reflow soldering profiles up to 260°C peak.

Is LP5004NL a Power over Ethernet (PoE) transformer?

No. LP5004NL is a Non-PoE Gigabit discrete LAN transformer designed strictly for Ethernet signal transmission and isolation without DC power delivery.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download