LP1102NL 10/100 BASE-T Single Port SMD 16 Pin Lan Magnetics Transformer
P/N:
LP1102NL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LP1102NL
- Compatible Brands: LINK-PP
- Data Rate: 10 BASE-T,100 BASE-TX
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP1102NL
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LP1102NL
Packaging Details:
N.W/pCS:
0.001kg
Package:
Reel
SPQ:
750pcs
Qty/carton:
4500pcs
Carton size:
36*35.5*23cm
G.W/carton:
6.3kg
Product Specifications
| LINK-PP Part Number | LP1102NL | Transformer Type | Lan Transformer |
| Part Status | Active | Turns Ratio - Primary: Secondary | 1:1 Transmitter, 1:1 Receiver |
| Construction | OPEN FRAME | Application-Lan | Ethernet(Non-PoE) |
| Number of Ports | Single Port | Speed | 10/100 Base-T |
| Package | Tape & Reel | Cores per Port | 4 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN Number | 16 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.201/5.10 | Package Length (Inches/mm) | 0.504/12.80 |
| Package Width (Inches/mm) | 0.366/9.30 | Temperature | -40℃ TO +85℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
Single-Port 10/100 Base-T 16-Pin LAN Transformer
The LINK-PP LP1102NL is a discrete, single-port LAN transformer listed for 10/100 Base-T Ethernet. The catalog specifies a 16-pin surface-mount package, four cores per port, 1CT:1CT RX/TX turns ratio, T,C,S configuration and Non-PoE operation.
The currently attached PDF identifies LP1102NLE rather than LP1102NL. Confirm the ordered suffix and current drawing before selecting a temperature grade, creating the footprint or qualifying a replacement. The transformer is passive magnetics; AutoMDX behavior belongs to the host Ethernet interface.
Design Positioning and Qualification
The LP1102NL should be selected against the host design's documented mechanical and interface requirements. No additional third-party equivalent or platform qualification is established by this page.
Mechanical and System Integration Considerations
- Suffix control: Put LP1102NL on the BOM and request its own applicable drawing; do not merge NL and NLE documentation without confirmation.
- Temperature grade: Resolve the mismatch between the catalog temperature entry and the attached NLE drawing before thermal qualification.
- Electrical interface: Match TX/RX winding connections and center taps to the host PHY's magnetics requirements.
- Footprint: Confirm terminal pitch, height and recommended pads using the drawing for the exact ordered part.
Procurement and OEM Qualification
For a quotation or sample request, provide the full LP1102NL part number, quantity, target application and required drawing revision. Confirm the selected package, assembly conditions and any required qualification records with LINK-PP. Complete sample evaluation and AVL approval before volume release; request current availability and lead time for the order.
Engineering Verification Checklist
- Identity: Match the full ordered part number and suffix to the drawing and sample.
- Documentation: Resolve the revision-check items above before PCB or system approval.
- Interface: Compare the drawing connections or mechanical interface with the target design.
- Assembly: Verify the footprint, installed envelope and approved manufacturing process.
- Operating conditions: Confirm the applicable component ratings and host environment.
- Production release: Record sample results, required documents and AVL acceptance.
Frequently Asked Questions
Does the attached PDF identify LP1102NL exactly?
Its title block identifies LP1102NLE. Obtain confirmation of the drawing and specifications for LP1102NL before treating the two suffixes as equivalent.
Can the catalog temperature be used for an industrial design?
The catalog and attached drawing are not aligned. Confirm the ordered temperature grade and evaluate the actual component temperature in the system.
Does LP1102NL perform AutoMDX switching?
No. It is passive magnetics. Any automatic pair selection is implemented by the host Ethernet interface.
Is LP1102NL a PoE transformer?
The current table specifies Non-PoE. Do not infer PoE support from its pin count, ratio or Ethernet speed.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































