LP82425ANLE Single Port 1000 BASE-T Ethernet Transformer Modules PoE 24 Pin
P/N:
LP82425ANLE
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LP82425ANLE
- Compatible Brands: LINK-PP
- Data Rate: 1000 BASE-T,10 BASE-T,100 BASE-TX
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: PoE
- P/N: LP82425ANLE
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LP82425ANLE
Packaging Details:
N.W/pCS:
0.0025kg
Package:
Reel
SPQ:
350pcs
Qty/carton:
1400pcs
Carton size:
37*37*25cm
G.W/carton:
7kg
Product Specifications
| LINK-PP Part Number: | LP82425ANLE | Transformer Type | Lan Transformer |
| Part Status | Active | Turns Ratio - Primary:Secondary | 1:1 Transmitter, 1:1 Receiver |
| Construction | OPEN FRAME | Application-Lan | Ethernet(PoE) |
| Number of Ports | Single Port | Speed | 10/100/1000 Base-T |
| Package | Tape & Reel | Cores per Port | 8 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN number | 24 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.225/5.72 | Package Length (Inches/mm) | 0.537/13.64 |
| Package Width (Inches/mm) | 0.740/18.8 | Temperature | -40℃ TO +85℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
Product Engineering Overview
The LINK-PP LP82425ANLE is a 10/100/1000BASE-T discrete LAN transformer listed for PoE Ethernet applications. Its surface mount configuration has a 24-terminal package and 5.72 mm listed package height. Review the numbered signal paths and center-tap connections against the host PHY circuit before choosing the PCB footprint.
The mechanical sheet distinguishes the component envelope from the suggested land pattern. Build the footprint from the pad drawing rather than treating the table's 13.64 mm and 18.8 mm dimensions as pad-to-pad distances.
Design Positioning and Qualification
The LP82425ANLE can be evaluated for existing 10/100/1000BASE-T designs using comparable mechanical and electrical requirements. No specific third-party replacement is established on this page. Qualify the actual host board rather than relying on a presumed standard footprint.
Electrical and Mechanical Integration
- PHY connections: Compare signal pairs, polarity and center-tap connections with the host PHY reference circuit. The passive component does not implement network protocols.
- PCB layout: Use the model-specific recommended footprint, pin-1 datum and clearances. Follow the manufacturer's copper keep-out and clearance requirements.
- Assembly envelope: Check component height, land pattern, courtyard and assembly process against the applicable drawing. Package dimensions and PCB pad dimensions serve different purposes.
- Power and environment: PoE is the listed application. Confirm electrical limits and operating conditions within the complete host design.
Procurement and OEM Qualification
Use LP82425ANLE and the agreed drawing revision on the sample request, BOM and purchase documentation. Evaluate samples on the target board, record electrical and assembly results, and complete the approved-vendor review before production release. Confirm quantities, packaging and the delivery schedule for the actual order rather than assuming lifecycle status establishes availability.
Engineering Verification Checklist
- Confirm the full part number and drawing revision.
- Review all signal pairs, center taps and host PHY connections.
- Verify the footprint, terminal numbering and pin-1 orientation.
- Check courtyard, assembly height and the specified mounting process.
- Confirm PoE application requirements and the component operating range.
- Validate samples on the intended board and record the production approval.
Frequently Asked Questions
What is LP82425ANLE used for?
The LINK-PP LP82425ANLE is a 10/100/1000BASE-T discrete LAN transformer listed for PoE Ethernet applications. Its surface mount configuration has a 24-terminal package and 5.72 mm listed package height.
Does LP82425ANLE use the same dimensions for its body and PCB land pattern?
No. The mechanical sheet gives separate component and suggested pad-layout dimensions. Confirm pin 1, pad pitch, row spacing and courtyard from the corresponding views before library release.
Does LP82425ANLE support Power over Ethernet (PoE)?
The supplied specification lists PoE application. This is a component selection attribute, not approval of a complete PSE or PD. Verify the model's documented electrical limits, the intended power mode and the complete host power path before production; do not infer a wattage or power class from the label alone.
Does LP82425ANLE perform AutoMDX switching?
No. It is a passive magnetic component. The AutoMDX field refers to its use with an Ethernet interface supporting AutoMDX operation; pair detection and switching are functions of the host PHY.
What should be supplied when requesting LP82425ANLE samples or a quotation?
Provide the complete part number, target quantity, host interface and required drawing revision. Confirm sample configuration, commercial terms and delivery schedule with LINK-PP; this page does not establish stock, MOQ or a fixed lead time.
Does the operating temperature rating qualify the complete host system?
No. The specification lists -40℃ TO +85℃ for this component. Check ambient conditions, assembly heating and the operating limits of the PHY, connector and surrounding electronics on the target equipment.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































