HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP11AC02000压接脚-有月牙.jpg
  • LP11AC02000压接脚-有月牙2.jpg
  • LP11AC02000压接脚-有月牙4.jpg
  • LP11AC02000压接脚-有月牙1.jpg
  • LP11AC02000压接脚-有月牙3.jpg

LP11AC02000 1x1 Port SFP Cage Press-Fit Through Hole With EMI Spring Finger

P/N:

LP11AC02000

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

LINK-PP

Compatible P/N:

LP11AC02000

  • Compatible Brands: LINK-PP
  • Product Type: Cage
  • EMI Shielding: Internal/External EMI Springs
  • Lightpipe Options: Without Lightpipe
  • PCB Termination: Through Hole - Press-Fit
  • Operating Temperature (°C): -55-85
  • Number of Ports: 1x1
  • Connector Types: SFP
  • P/N: LP11AC02000
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Competitor P/N: LP11AC02000

Product Specifications

LINK-PP Part Number LP11AC02000 Part Status Active
Connector Style Cage Connector Type SFP
Cage COPPER ALLOY,Ni PL ATED PACKAGING TRAY PACKAGING
Port Matrix Configuration 1x1 Port Number of Ports 1
Operating Temperature Range -55 – 85°C Mounting Style Through Hole, Right Angle
Included Lightpipe No Termination Press-Fit
Height (Inches/mm) 9.75/0.384 Length (Inches/mm) 48.75/1.919
Width (Inches/mm) 14.00/0.551 EMI Containment Feature Type EMI Springs

LINK-PP LP11AC02000 1x1 Single-Port SFP Cage Technical Overview

The LINK-PP LP11AC02000 is an industry-standard 1x1 single-port SFP cage assembly featuring solderless press-fit PCB mounting and perimeter metallic EMI spring fingers engineered for 1Gb/s Ethernet, Fast Ethernet, and Fibre Channel networking platforms. Constructed from high-conductivity nickel-plated copper alloy, it provides discrete single-port I/O placement, low transfer impedance chassis EMI grounding, and reliable mechanical transceiver retention for enterprise switches, media converters, and industrial telecom infrastructure.

  • Mechanical Form Factor: 1x1 Single-Port SFP Cage Assembly in a lightpipe-free low-profile footprint (1.919" L x 0.551" W x 0.384" H / 48.75mm L x 14.00mm W x 9.75mm H).
  • Signal Ecosystem Support: Engineered for Gigabit Ethernet (1GbE), Fast Ethernet, 1G/2G/4G Fibre Channel, and SONET/SDH SFP optical transceivers and copper cable assemblies.
  • Board Mount Technology: Solderless Through-Hole Press-Fit termination with nickel-plated copper alloy body for high contact normal force and PCB retention.
  • Cross-Reference Sourcing: Direct footprint-compatible drop-in alternative to industry 1x1 SFP press-fit cages from TE Connectivity, Molex, and Amphenol for supply chain diversification.

LINK-PP LP11AC02000 SFP Cage Product Overview

LINK-PP LP11AC02000 is a 1x1 single-port SFP cage assembly featuring external perimeter metallic EMI spring fingers, nickel-plated copper alloy construction, and press-fit PCB mounting. Designed for discrete I/O interface placement on host system boards, this single-port assembly provides low transfer impedance grounding, structural transceiver retention, and thermal stability across an extended operating temperature range (-55°C to +85°C).

Key Benefits of LINK-PP LP11AC02000 SFP Cage

  • High-Reliability Discrete Single-Port Integration: Standalone 1x1 port matrix layout provides hardware PCB designers maximum trace routing versatility and placement flexibility across line card topologies.
  • 360-Degree External EMI Spring Finger Containment: Perimeter metallic spring fingers establish resilient, low-impedance grounding contact against chassis bezel cutouts for superior electromagnetic containment.
  • Durable Nickel-Plated Copper Alloy Body: Formed from high-conductivity copper alloy with premium nickel plating, offering low transfer contact resistance and high insertion wear resistance over repeated module cycles.
  • Solderless Through-Hole Press-Fit Integration: Precision press-fit compliant pins enable automated board insertion without subjecting sensitive motherboard substrates and adjacent SMT components to solder reflow thermal stress.
  • Extended Temperature Operating Envelope (-55°C to +85°C): Built for long-term electrical and mechanical reliability in demanding enterprise data centers, outdoor telecom cabinets, and industrial networking hubs.
  • Multi-Source Drop-In Compatibility: Standard SFP MSA mechanical footprint enables seamless deployment alongside original OEM equipment for BOM cost optimization and lead-time reduction.

1x1 Single-Port SFP Architecture & PCB Routing Flexibility

Engineered in compliance with SFP MSA (SFF-8472 / INF-8074i) mechanical specifications, the LINK-PP LP11AC02000 features a standalone 1x1 single-port footprint. This discrete architecture allows PCB layout engineers to position individual SFP ports in optimal locations near switching silicon or optical engines, minimizing differential trace lengths and reducing high-speed signal attenuation.

Streamlined Low-Profile Footprint & Press-Fit Board Mounting

The right-angle board mount geometry features an overall height of just 9.75mm [0.384 in] above the PCB, making it ideal for compact 1RU switch faceplates, PCI Express expansion cards, and space-constrained industrial enclosures. Solderless press-fit pins install firmly into plated through-holes (PTH), establishing strong mechanical retention and electrical grounding without requiring secondary wave soldering.

EMI Shielded SFP Cage Design with Copper Alloy Construction

Operating high-speed serial interfaces requires careful electromagnetic compatibility (EMC) design to control radiated emissions and shield internal differential signal traces from ambient electromagnetic interference.

360-Degree Perimeter EMI Spring Fingers

The LINK-PP LP11AC02000 incorporates heavy-duty metallic spring fingers around the entire outer perimeter of the module port opening. When inserted through the chassis bezel, these springs compress against the metallic faceplate cutout, establishing a continuous, low-impedance grounding loop around the transceiver interface.

Corrosion-Resistant Nickel Plated Copper Alloy

Formed from high-conductivity copper alloy with a protective nickel plating, the cage housing delivers high structural rigidity, mechanical wear resistance, and long-term corrosion protection across an operating temperature range of -55°C to +85°C. This supports system-level EMC design requirements for equipment targeting FCC and CE compliance.

Target Applications: Gigabit Ethernet Switches, Industrial Automation, and Telecom

Combining SFP MSA compliance, single-port discrete placement, EMI spring fingers, and press-fit technology, the LINK-PP LP11AC02000 supports various networking and industrial systems:

  • Enterprise Gigabit Ethernet Switches & Routers: Ideal for 1GbE Top-of-Rack (ToR) switches, edge routers, and media converters requiring standalone SFP interfaces.
  • Storage Area Networks (SAN): Deployed in 1G, 2G, and 4G Fibre Channel host bus adapters (HBAs), storage array controllers, and SAN expansion modules.
  • Industrial Automation & Smart Grid: Suitable for extended temperature industrial Ethernet switches, DIN-rail automation hubs, and substation communication nodes.

How to Select and Verify an SFP Cage Assembly Replacement

When evaluating or sourcing discrete 1x1 SFP cage assemblies for new board designs or supply chain diversification, hardware engineers should verify the following core parameters:

  • Interface Speed Generation (SFP vs SFP+): Confirm whether the system interface operates at standard SFP rates (up to 4Gbps for 1GbE / Fibre Channel) or requires higher-frequency SFP+ (10G/16G) cages with tighter EMI tolerances.
  • Port Matrix Configuration (1x1 Discrete): Confirm that a 1x1 single-port discrete footprint matches your motherboard layout and panel bezel cutout constraints.
  • Mechanical Envelope Dimensions: Verify that the 48.75mm length, 14.00mm width, and 9.75mm height envelope fits within your enclosure height and card slot pitch.
  • EMI Shielding Mechanism: Ensure the 360-degree perimeter metallic spring fingers align with your front panel bezel cutout to establish a low-impedance grounding seal.
  • Mechanical Drawing Verification: Check press-fit pin hole layouts, grounding peg positions, and physical tolerances against official engineering drawings.

Frequently Asked Questions

What is LINK-PP LP11AC02000?

LINK-PP LP11AC02000 is a discrete 1x1 single-port SFP cage assembly featuring solderless press-fit PCB mounting, nickel-plated copper alloy construction, and perimeter metallic EMI spring fingers. It supports 1GbE, Fast Ethernet, and 1G-4G Fibre Channel optical transceivers.

What is the difference between SFP and SFP+ cages?

SFP cages (like LP11AC02000) and SFP+ cages share the same physical form factor envelope. However, SFP cages are optimized for data rates up to 4 Gbps (1GbE, 1G-4G FC), whereas SFP+ cages are engineered with tighter internal tolerances and lower transfer impedance to handle 10G/16G signaling rates without crosstalk.

Is LINK-PP LP11AC02000 compatible with TE Connectivity or Molex 1x1 SFP cages?

Yes. LINK-PP LP11AC02000 is engineered in strict compliance with SFP MSA (SFF-8472 / INF-8074i) mechanical footprint specifications, making it a direct physical, mechanical, and electrical drop-in replacement for equivalent 1x1 SFP press-fit cages from major OEMs.

What operating temperature range is supported by LP11AC02000?

LINK-PP LP11AC02000 is rated for an extended operating temperature range of -55°C to +85°C, ensuring reliable mechanical pin contact retention and physical stability in climate-controlled data centers and outdoor industrial enclosures.

What are the key mechanical features of LINK-PP LP11AC02000?

Key features include a discrete 1x1 single-port matrix, solderless press-fit pin termination, 360-degree perimeter metallic EMI spring fingers, nickel-plated copper alloy body, and tray packaging rated for -55°C to +85°C.

Are compatible replacement options available for LINK-PP LP11AC02000?

Compatible replacement options may be available from qualified manufacturers. Hardware engineers should verify mechanical drawings, press-fit hole patterns, physical dimensions, and EMI requirements before final integration or secondary-source qualification.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download