LP21669NL 10/100 Base-T Single Port SMT 16 PIN LAN Magnetic Transformer Modules
P/N:
LP21669NL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LP21669NL
- Compatible Brands: LINK-PP
- Data Rate: 10 BASE-T,100 BASE-TX
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: 0℃ TO +70℃
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP21669NL
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LP21669NL
Packaging Details:
N.W/pCS:
0.002kg
Package:
Reel
SPQ:
750pcs
Qty/carton:
4500pcs
Carton size:
37*37*25cm
G.W/carton:
7kg
Product Specifications
| LINK-PP Part Number: | LP21669NL | Transformer Type | Lan Transformer |
| Part Status | Active | Turns Ratio - Primary:Secondary | 1:1.22 Transmitter, 1:1.22 Receiver |
| Construction | OPEN FRAME | Application-Lan | Ethernet(Non-PoE) |
| Number of Ports | Single Port | Speed | 10/100 Base-T |
| Package | Tape & Reel | Cores per Port | 4 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN number | 16 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.222/5.65 | Package Length (Inches/mm) | 0.504/12.80 |
| Package Width (Inches/mm) | 0.272/6.90 | Temperature | 0℃ TO +70℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
Ethernet magnetics for board-level integration
LINK-PP LP21669NL is a surface-mount passive Ethernet magnetic module. Its product record lists 10/100 Base-T and Non-PoE; the module works with a separately selected PHY and connector.
The record lists a 0°C to +70°C component range and 6.90 × 12.80 × 5.65 mm package dimensions. Confirm the PCB land pattern, pin assignments and the applicable revision before laying out the board.
Design Positioning and Qualification
No third-party equivalent is identified in the existing record. Compare electrical requirements and the complete board footprint when evaluating a replacement.
Procurement and OEM Qualification
Request samples with the LINK-PP part number and drawing revision. Confirm packaging, lead time and revision before AVL approval; test the sample with the intended PHY, PCB and power architecture.
Electrical and PCB Integration
- Pinout: Match transformer connections and center taps to the applicable schematic.
- Footprint: Check the complete surface-mount land pattern and fabrication tolerances.
- Placement: Follow the manufacturer's recommended copper keep-out and clearance requirements.
- Power: The record specifies Non-PoE. Select suitably rated magnetics when power over Ethernet is required.
- Validation: Verify isolation and signal characteristics against the applicable documentation.
Design Consideration Comparison
| Architecture | Engineering consideration |
|---|---|
| Discrete Ethernet magnetics | Magnetics and connector are placed separately; routing and footprint depend on the selected parts. |
| Integrated magnetics connector | The connector and magnetics share an assembly; check its complete pinout and panel geometry. |
Application Considerations
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Ethernet equipment using discrete magnetics | Verify PHY pinout, isolation and PCB routing. |
| OEM board integration | Qualify the component with the selected connector, power design and host environment. |
Engineering Verification Checklist
- Resolve any title and specification-table differences.
- Compare magnetic pin assignments and PHY connections.
- Check the surface-mount footprint against the drawing.
- Verify isolation and signal performance in the assembled system.
- Confirm power-path rating where PoE is required.
- Validate temperature and manufacturing process against the applicable documentation.
Frequently Asked Questions
What is LP21669NL?
It is a surface-mount passive Ethernet magnetic module, not an RJ45 connector or data-processing IC.
How should a replacement be evaluated?
No third-party equivalent is identified in the existing record. Compare electrical requirements and the complete board footprint when evaluating a replacement.
What should be checked in the PCB layout?
Compare the complete land pattern and magnetic pinout with the applicable drawing, and follow the manufacturer's clearance recommendations.
What temperature range is listed?
The component record lists 0°C to +70°C; the finished equipment must be assessed separately.
Does LP21669NL support PoE?
The record specifies Non-PoE. Select suitably rated magnetics when power over Ethernet is required.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































