H1601CG 10/100BASE-T SMD Transformer Modules Compatible LINK-PP LP1188NL 16PIN LAN Magnetics
P/N:
LP1188NL
Manufacturer:
LINK-PP
Compatible Brand:
MNC
Compatible P/N:
H1601CG
- Data Rate: 10 BASE-T,100 BASE-TX
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: 0℃ TO +70℃
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP1188NL
- Manufacture: LINK-PP
- Compatible Brand: MNC
- Compatible P/N: H1601CG
Packaging Details:
N.W/pCS:
0.002kg
Package:
Reel
SPQ:
750pcs
Qty/carton:
4500pcs
Carton size:
36*35.5*23cm
G.W/carton:
6.3kg
Product Specifications
| LINK-PP Part Number: | LP1188NL | MNC Part Number | H1601CG |
| Part Status | Active | Transformer Type | Lan Transformer |
| Construction | OPEN FRAME | Application-Lan | Ethernet(Non-PoE) |
| Number of Ports | Single Port | Speed | 10/100 Base-T |
| Package | Tape & Reel | Cores per Port | 4 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN Number | 16 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.201/5.10 | Package Length (Inches/mm) | 0.504/12.80 |
| Package Width (Inches/mm) | 0.366/9.30 | Temperature | 0℃ TO +70℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
Single-Port 10/100 Base-T 16-Pin SMD LAN Transformer
The LINK-PP LP1188NL is a discrete, single-port LAN transformer listed for 10/100 Base-T, Non-PoE Ethernet interfaces. Its catalog specification identifies a 16-pin surface-mount package, four cores per port, a 1CT:1CT turns ratio and T,C,S configuration, supplied in tape and reel.
H1601CG is the stated cross-reference. That reference does not establish a shared footprint or pinout: compare the TX/RX winding connections, center taps and pad geometry in both drawings. The host PHY and system layout remain part of the electrical qualification.
Compatibility and Design Positioning
The LINK-PP LP1188NL is presented as an alternative-sourcing option with the stated H1601CG cross-reference. This is a catalog positioning statement; compare both official drawings and validate the target assembly before substitution.
Mechanical and System Integration Considerations
- TX/RX mapping: Verify the winding and center-tap assignments independently; equal pin count does not prove identical connectivity.
- Surface-mount assembly: Review the recommended pads, terminal geometry and board assembly process against the exact package drawing.
- PHY matching: Evaluate the magnetics with the host PHY, termination network and routed differential pairs.
- Variant documentation: Retain the table comment SAME AS NL VERSION in the record, but confirm the exact ordered part and drawing revision before release.
Procurement and OEM Qualification
For a quotation or sample request, provide the full LP1188NL part number, quantity, target application and required drawing revision. Confirm the selected package, assembly conditions and any required qualification records with LINK-PP. Complete sample evaluation and AVL approval before volume release; request current availability and lead time for the order.
Engineering Verification Checklist
- Identity: Match the full ordered part number and suffix to the drawing and sample.
- Documentation: Resolve the revision-check items above before PCB or system approval.
- Interface: Compare the drawing connections or mechanical interface with the target design.
- Assembly: Verify the footprint, installed envelope and approved manufacturing process.
- Operating conditions: Confirm the applicable component ratings and host environment.
- Production release: Record sample results, required documents and AVL acceptance.
Frequently Asked Questions
Is LP1188NL an integrated RJ45 connector?
No. It is discrete passive LAN magnetics. The host design also needs an appropriate connector, PHY and interface circuitry.
Is H1601CG a verified drop-in replacement?
No direct substitution is established here. Compare the official pin mapping, winding configuration, footprint and electrical requirements before qualification.
Which temperature and package height apply?
The current table and attached drawing differ. Confirm the exact ordered variant and current drawing before relying on either value for production.
Does LP1188NL support PoE?
The table specifies Non-PoE. Select magnetics with explicit ratings for the intended PoE design rather than inferring support from the turns ratio.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































