HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LP41606ANL.jpg
  • LP41606ANL1.JPG

Pulse HX0068ANL Compatible LINK-PP LP41606ANL 10/100 Base-T Single Port SMT 12 PIN Low Profile PC Card Lan Transformer Modules

P/N:

LP41606ANL

Manufacturer:

LINK-PP

Compatible Brand:

Pulse

Compatible P/N:

HX0068ANL

  • Compatible Brands: Pulse
  • Data Rate: 10 BASE-T,100 BASE-TX
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: -40℃ TO +85°C
  • Application -LAN: ETHERNET(Non PoE)
  • P/N: LP41606ANL
  • Manufacture: LINK-PP
  • Compatible Brand: Pulse
  • Compatible P/N: HX0068ANL

Packaging Details:

N.W/pCS:

0.001kg

Package:

Reel

SPQ:

2000pcs

Qty/carton:

12000pcs

Carton size:

37*37*25cm

G.W/carton:

7.5kg

Product Specifications

LINK-PP Part Number: LP41606ANL Pulse Part Number HX0068ANL
Part Status Active Transformer Type Lan Transformer
Construction OPEN FRAME Application-Lan Ethernet(NoN PoE)
Number of Ports SINGLE Speed 10/100 Base-T
Package Tape & Reel Cores per Port 4
AutomDX Yes Comment SAME AS NL VERSION
PIN number 12 Mounting Type Surface Mount
Package Height (Inches/mm) 0.078/1.98 Package Length (Inches/mm) 0.500/12.70
Package Width (Inches/mm) 0.380/9.65 Temperature -40℃ TO +85℃
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C,S

Pulse HX0068ANL / Belfuse S558-5999-AB-F Compatible LINK-PP LP41606ANL PC Card LAN Transformer Technical Overview

The LINK-PP LP41606ANL (engineered as a direct 100% SMT footprint and electrical drop-in replacement for Pulse Electronics HX0068ANL and Belfuse S558-5999-AB-F) is an industrial-grade 12-pin single-port 10/100 Base-T PC Card discrete LAN magnetics module featuring an ultra-low profile package height of only 1.98mm [.078 in], open-frame construction, and T,C,S circuit topology. Engineered specifically for surgical equipment, medical diagnostic consoles, PCMCIA cards, and ultra-thin embedded mainboards, its 4-core transformer/choke matrix (1CT:1CT turns ratio) delivers 10/100 Mbps Fast Ethernet signal isolation, 1500Vrms galvanic isolation, common-mode noise suppression, and extended operating temperature reliability from -40°C to +85°C.

  • PC Card Ultra-Low Profile Height (1.98mm / 0.078 in): At under 2.0mm tall, this ultra-thin surface-mount discrete module fits into surgical equipment consoles, PCMCIA expansion cards, and compact handheld devices where standard 6.6mm/12mm transformers cannot fit.
  • Fast Ethernet Signal Isolation & T,C,S Topology: Configured with Transformer (T), Common-mode Choke (C), and Shunt Autotransformer (S) elements across transmit and receive differential pairs for high common-mode EMI rejection.
  • Industrial Temperature Endurance (-40°C to +85°C): Certified for an extended operating temperature range of -40°C to +85°C (-40°F to +185°F) in unconditioned industrial cabinets, medical diagnostic devices, and field terminals.
  • Automated Tape & Reel Assembly: Supplied in Tape & Reel packaging for automated SMT Pick & Place reflow assembly, serving as a direct drop-in second-source replacement for Pulse HX0068ANL and Belfuse S558-5999-AB-F.

LINK-PP LP41606ANL PC Card Discrete LAN Transformer Overview

LINK-PP LP41606ANL is a 12-pin single-port discrete SMT Fast Ethernet LAN transformer module designed for surgical equipment, medical consoles, PCMCIA cards, and ultra-thin embedded mainboards where magnetic transformers are separated from RJ45 connectors on the PCB. Featuring an open-frame construction, a 1:1 transmit and receive turns ratio, and an ultra-low package height of 1.98mm (0.078 in), this module provides 1500Vrms isolation and EMI suppression for 10/100BASE-TX PHY transceivers. Packaged in Tape & Reel for automated SMT manufacturing, it offers a reliable, space-saving secondary-source replacement for Pulse HX0068ANL and Belfuse S558-5999-AB-F.

Key Benefits of LINK-PP LP41606ANL / Pulse HX0068ANL Compatible LAN Transformer

  • Ultra-Thin 1.98mm Package Height Fits Surgical Equipment & PC Cards: Solves vertical clearance restrictions in operating room medical consoles, ultra-compact PCMCIA expansion cards, and thin-client embedded mainboards without mechanical interference.
  • T,C,S Circuit Configuration for Superior Signal Integrity: Combines isolation transformers (T), common-mode chokes (C), and shunt autotransformers (S) to minimize insertion loss and suppress high-frequency EMI noise.
  • 1500Vrms Galvanic Isolation Voltage: Protects sensitive Ethernet PHY transceiver chips from cable discharge events (CDE), ESD transients, and high-voltage common-mode ground loops.
  • Industrial Operating Temperature Range (-40°C to +85°C): Constructed with high-grade FR4 substrate and open-frame housing to withstand severe thermal fluctuations in medical equipment rooms and outdoor field units.
  • Tape & Reel Packaging for Automated Assembly: Supplied in industry-standard Tape & Reel format for automated Pick & Place machinery and lead-free SMT reflow soldering up to 260°C peak.
  • Direct Second Sourcing for Pulse HX0068ANL & Belfuse S558-5999-AB-F: Identical 12-pin SMT pad land pattern allows seamless drop-in secondary sourcing to reduce procurement lead times.

Discrete LAN Magnetics & PC Card Package Architecture

In surgical medical equipment and ultra-portable embedded systems, hardware architects specify ultra-thin PC Card LAN magnetics modules like the LINK-PP LP41606ANL to satisfy strict vertical height limits under 2.0mm.

1.98mm Ultra-Low Profile Height Advantages

Standard discrete LAN transformers range from 6.6mm to 12.0mm in height. The LP41606ANL achieves a package height of only 1.98mm [.078 in] through a specialized flat-winding open-frame toroidal core layout. This ultra-thin profile allows double-sided SMT board mounting inside surgical control displays, medical diagnostic consoles, and handheld field testing terminals.

12-Pin T,C,S Magnetic Signal Isolation

Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores, the LP41606ANL establishes 1500Vrms galvanic isolation between the Ethernet PHY chip and external line cables. The T,C,S topology provides precise impedance matching and common-mode choke filtering across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.

PCB Mounting & Mechanical Specifications

Designed for automated Through-Hole/SMT assembly, the LP41606ANL combines an ultra-compact footprint with high terminal coplanarity.

12-Pin SMT Footprint & Automation Assembly

With package dimensions of 1.98mm H x 12.70mm L x 9.65mm W, the 12-pin SMT layout provides precise lead coplanarity within 0.10mm. Supplied in Tape & Reel packaging, the LP41606ANL feeds directly into automated placement machines, ensuring high-volume manufacturing efficiency.

Target Applications: Surgical Equipment, Medical Consoles, and Embedded Mainboards

Combining IEEE 802.3u Fast Ethernet speed, 1.98mm ultra-low profile height, T,C,S noise suppression, and Pulse HX0068ANL / Belfuse S558-5999-AB-F compatibility, the LINK-PP LP41606ANL supports diverse embedded platforms:

  • Operating Room Surgical Consoles & Medical Diagnostic Displays: Ideal for surgical video routing displays, patient vital sign monitors, and medical imaging consoles.
  • PCMCIA Ethernet Network Adapters & ExpressCards: Deployed in legacy PCMCIA network interface cards, ExpressCard expansion modules, and compact communication dongles.
  • Ultra-Thin Embedded Single Board Computers (SBCs): Suitable for compact industrial mainboards, thin-client embedded computers, and space-constrained IoT gateways.

How to Select and Verify LP41606ANL vs. Pulse HX0068ANL

Hardware design engineers and procurement specialists evaluating the LINK-PP LP41606ANL as a second-source replacement for Pulse Electronics HX0068ANL / Belfuse S558-5999-AB-F should verify the following core parameters:

  • 1.98mm Package Height & Vertical Clearance: Confirm that the 1.98mm [.078 in] ultra-low package height satisfies your surgical console or PC Card enclosure clearance constraints.
  • 12-Pin SMT Pad Footprint Alignment: Confirm that the 12-pin SMT land pattern, lead pitch, and overall dimensions (12.70mm L x 9.65mm W) match the HX0068ANL / S558-5999-AB-F PCB layout.
  • PHY Transceiver Reference Design Matching: Verify that a 1:1 primary-to-secondary turns ratio and T,C,S magnetic configuration align with your Fast Ethernet PHY transceiver chip recommendation.
  • Operating Temperature Envelope: Confirm that the -40°C to +85°C industrial temperature rating satisfies your product's environmental specification.

Frequently Asked Questions

Is LINK-PP LP41606ANL compatible with Pulse HX0068ANL and Belfuse S558-5999-AB-F?

Yes. LINK-PP LP41606ANL is a direct 12-pin SMT footprint, electrical, and functional drop-in replacement for Pulse Electronics HX0068ANL and Belfuse S558-5999-AB-F, featuring an ultra-low 1.98mm package height and -40°C to +85°C temperature range.

What is the package height of LINK-PP LP41606ANL?

LP41606ANL features an ultra-low profile package height of only 1.98mm (0.078 inches), allowing it to fit into surgical equipment displays, PC Cards, and thin-client mainboards.

What speed and protocols are supported by LP41606ANL?

LP41606ANL supports 10/100 Base-T Fast Ethernet data rates compliant with IEEE 802.3u standards, complete with Auto-MDIX support across transmit and receive lines.

What is the operating temperature range of LP41606ANL?

LINK-PP LP41606ANL is rated for an extended industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for medical operating rooms and unconditioned field terminals.

What is the magnetic circuit configuration (T,C,S) of LP41606ANL?

The LP41606ANL uses a T,C,S topology, which integrates a 1:1 Isolation Transformer (T), a Common-mode Choke (C), and a Shunt Autotransformer (S) across transmit and receive lines to provide superior EMI noise suppression and impedance matching.

How is LP41606ANL packaged for automated manufacturing?

LP41606ANL is supplied in Tape & Reel format for automated SMT Pick & Place feeders, supporting lead-free SMT reflow soldering profiles up to 260°C peak.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download