HR681686 Compatible LINK-PP LP41604ANL 10/100 Base-T Single Port Low Profile Ethernet Transformer Modules
P/N:
LP41604ANL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
HR681686
- Data Rate: 10 BASE-T,100 BASE-TX
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: ETHERNET(Non PoE)
- P/N: LP41604ANL
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: HR681686
Packaging Details:
N.W/pCS:
0.001kg
Package:
Reel
SPQ:
2000pcs
Qty/carton:
12000pcs
Carton size:
36*35.5*23cm
G.W/carton:
6.3kg
Product Specifications
| LINK-PP Part Number: | LP41604ANL | Part Number | HR681686 |
| Part Status | Active | Transformer Type | Lan Transformer |
| Construction | OPEN FRAME | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | SINGLE | Speed | 10/100 Base-T |
| Package | Tape & Reel | Cores per Port | 4 |
| AutomDX | Yes | Comment | SAME AS NL VERSION |
| PIN number | 12 | Mounting Type | Surface Mount |
| Package Height (Inches/mm) | 0.090/2.29 | Package Length (Inches/mm) | 0.380/9.65 |
| Package Width (Inches/mm) | 0.500/12.70 | Temperature | -40℃ TO +85℃ |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C,S |
HR681686 Compatible LINK-PP LP41604ANL 10/100Base-T Low-Profile LAN Transformer
Engineered to resolve severe vertical clearance constraints in precision medical devices and compact networking hardware, the LINK-PP LP41604ANL is an ultra-low-profile, discrete 10/100Base-T (Fast Ethernet) LAN Magnetic Transformer. Boasting an exceptional package height of just 2.29mm (0.090 inches), this 12-pin Surface Mount Technology (SMT) module is specifically designed for space-constrained logic boards where traditional, bulky magnetic components cannot be deployed. By decoupling the isolation magnetics from the physical RJ45 interface, hardware architects gain maximum flexibility for PCB thermal management, advanced electromagnetic interference (EMI) shielding, and specialized faceplate designs.
Manufactured under stringent ISO9001 and ISO14001 quality management protocols, the LP41604ANL is fully compliant with IEEE 802.3, UL, REACH, and RoHS specifications. Rated for a rugged industrial operating temperature range of -40°C to +85°C, this non-PoE transformer delivers uncompromising data integrity and robust galvanic isolation for mission-critical applications ranging from sensitive surgical equipment to ruggedized edge routers and Switched-Mode Power Supplies (SMPS).
HR681686 Cross-Reference & BOM Optimization
Developed as an exact form-fit-function compatible replacement for the HR681686, the LP41604ANL empowers hardware architects and procurement teams to secure their component supply chains and mitigate shortages. Delivering an identical ultra-low SMD footprint, equivalent electrical impedance, and matched magnetic characteristics, it serves as a seamless drop-in alternative. Packaged in standard Tape & Reel format, it integrates flawlessly into high-speed, automated pick-and-place assembly lines without requiring costly printed circuit board (PCB) redesigns, board spins, or reflow profile adjustments.
Ultra-Low Profile SMT Architecture
The mechanical envelope and material composition of the LP41604ANL are explicitly tailored to support miniaturized logic boards subjected to extreme environmental stress.
- 2.29mm Z-Axis Profile: The ultra-thin 2.29mm height makes this transformer ideal for thin-client devices, compact digital cameras, and slimline set-top boxes where Z-axis space is at an absolute premium.
- Open Frame Construction: The open-frame design facilitates superior convection cooling and thermal dissipation compared to fully encapsulated (potted) modules, preventing localized heat entrapment on the PCB.
- Automated Assembly: Optimized for standard SMD reflow soldering processes, ensuring highly reliable, low-impedance solder joints that withstand physical vibration, mechanical shock, and thermal cycling.
- Extreme Thermal Endurance: The industrial-grade -40°C to +85°C rating guarantees that the internal magnetic cores will not saturate and electrical performance will remain stable in freezing outdoor enclosures or high-temperature factory environments.
Advanced Fast Ethernet Magnetic Topology
By placing the isolation magnetics in close proximity to the Ethernet PHY chip, designers can significantly reduce the length of unshielded differential pairs, thereby minimizing crosstalk and enhancing overall Electromagnetic Compatibility (EMC).
- 4-Core Magnetics: Precision-wound transformers and common-mode chokes (4 cores in total) are strictly tuned for 10/100Base-T frequencies, ensuring reliable signal fidelity, minimizing return loss, and aggressively suppressing common-mode noise.
- Galvanic Isolation: Provides robust high-voltage electrical isolation between the external twisted-pair network and the sensitive internal PHY transceivers. This forms a mandatory safety barrier against voltage transients, ESD, and ground loops—an absolute necessity for patient-connected surgical equipment.
- AutoMDIX Support: The symmetrical 1CT:1CT transformer architecture (T, C, S configuration) fully supports AutoMDIX protocols, enabling the physical layer to automatically negotiate and correct straight-through or crossover cable configurations without manual intervention.
Hardware Layout & Signal Integrity Considerations
When routing for the LP41604ANL, hardware architects must ensure that the 100-ohm differential pairs are strictly length-matched between the PHY, the transformer pads, and the discrete RJ45 receptacles to prevent phase skew. Furthermore, the digital ground plane must be physically isolated from the chassis ground directly beneath the transformer to prevent capacitive noise coupling and to preserve the absolute integrity of the galvanic isolation barrier.
Typical Applications
Combining an ultra-low 2.29mm profile, wide-temperature resilience, and uncompromised Fast Ethernet signal isolation, the LP41604ANL is the definitive choice for space-constrained, advanced electronic devices:
- Medical & Surgical Equipment: High-precision diagnostic imaging devices, patient telemetry monitors, and robotic surgical consoles requiring strict galvanic isolation and compact logic boards.
- Networking & Edge Computing: Ultra-thin edge routers, compact broadband set-top boxes, and specialized network firewalls requiring discrete magnetic decoupling.
- Power & Energy: Switched-Mode Power Supplies (SMPS) and smart grid data loggers requiring reliable 10/100Base-T links in noisy electrical environments.
- Consumer & Broadcast Electronics: High-bandwidth digital cameras, NVR/DVR security systems, and compact media controllers where Z-axis clearance is heavily restricted.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































