HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 1(1714017322443).jpg
  • 2(1714017322587).jpg

Pulse H1197NL Compatible LINK-PP LP1197NL 10/100 Base-T Single Port SMD 16PIN PoE Ethernet Telecom Transformer

P/N:

LP1197NL

Manufacturer:

LINK-PP

Compatible Brand:

Pulse

Compatible P/N:

H1197NL

  • Compatible Brands: Pulse
  • Data Rate: 10 BASE-T,100 BASE-TX
  • Mounting Type: Surface Mount
  • Turns Ratio TX: 1CT:1CT
  • Temperature: -40℃ TO +85°C
  • Application -LAN: PoE
  • P/N: LP1197NL
  • Manufacture: LINK-PP
  • Compatible Brand: Pulse
  • Compatible P/N: H1197NL

Packaging Details:

N.W/pCS:

0.002kg

Package:

Reel

SPQ:

750pcs

Qty/carton:

4500pcs

Carton size:

37*37*25cm

G.W/carton:

7kg

Product Specifications

LINK-PP Part Number LP1197NL Pulse Part Number H1197NL
Part Status Active Transformer Type LAN Transformer
Construction Open Frame Application-LAN Ethernet (PoE)
Number of Ports Single Port Speed 10/100BASE-T
Package Tape & Reel Cores per Port 2
AutoMDX Yes Comment Same as NL Version
PIN Number 16 Mounting Type Surface Mount
Package Height (Inches/mm) 0.244 / 6.20 Package Length (Inches/mm) 0.500 / 12.70
Package Width (Inches/mm) 0.366 / 9.30 Temperature -40°C to +85°C
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C, S

Pulse H1197NL Compatible Single-Port 10/100BASE-T Discrete LAN Transformer for PoE Applications

The LINK-PP LP1197NL is a single-port discrete 10/100BASE-T Fast Ethernet LAN transformer module specified for network designs with Power over Ethernet (PoE) requirements. Built in a 16-pin surface-mount (SMD) open-frame construction, it integrates an internal magnetic structure with a 1CT:1CT turns ratio (T, C, S configuration) to provide physical-layer isolation and differential signal coupling for Fast Ethernet circuits.

Featuring a 6.20 mm package height and a 12.70 mm by 9.30 mm board footprint, the module operates across an extended industrial temperature range of -40°C to +85°C and is supplied in Tape & Reel packaging for automated SMT assembly. It is positioned as a compatible alternative to the Pulse H1197NL discrete transformer for routers, set-top boxes, switched-mode power supplies (SMPS), digital cameras, and networked medical equipment interfaces where discrete physical-layer isolation and PoE capability are required.

Hardware designers should verify the mechanical land pattern, pin assignment, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.

Ethernet Interface: 10/100BASE-T Fast Ethernet
Reference Part: Pulse H1197NL
Application: Ethernet (PoE)
Package / Mounting: 16-Pin SMD (Open Frame)
Operating Temperature: -40°C to +85°C Industrial
Turns Ratio: 1CT:1CT (T, C, S)

Pulse H1197NL Compatible Design Positioning

The LP1197NL is positioned as a compatible alternative to the Pulse H1197NL for 10/100BASE-T Fast Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and electrical interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.

10/100BASE-T Signal Transmission and PoE Power Delivery

Fast Ethernet (100BASE-TX) communication utilizes two differential pairs: one dedicated to transmit (TX) and one to receive (RX). The LP1197NL incorporates an internal magnetic structure with a 1CT:1CT turns ratio (T, C, S configuration) to provide galvanic isolation and common-mode filtering specifically for these active pairs.

For PoE applications, the internal transformer center taps are structured to accommodate DC power currents delivered over the network cabling. The magnetic structure maintains required electrical isolation and signal coupling across the extended -40°C to +85°C industrial operating temperature range.

Hardware designers should evaluate the component in conjunction with the host Fast Ethernet PHY transceiver, controlled-impedance differential PCB trace routing, PoE controller circuitry, and system-level EMC grounding.

Mechanical and PCB Considerations

Physical mounting and board layout are critical factors when implementing discrete surface-mount LAN magnetics:

1. 16-Pin Open-Frame Package

The open-frame construction provides a vertical height of 6.20 mm (0.244 inches) with a compact board footprint of 12.70 mm by 9.30 mm. This form factor suits high-density assemblies and space-constrained communication boards.

2. Tape & Reel Packaging for SMT Assembly

Supplied in Tape & Reel format, the LP1197NL is engineered for automated pick-and-place equipment and standard surface-mount assembly workflows.

3. PCB Land Pattern and Pinout Verification

The module incorporates a 16-pin SMD footprint. Because pin arrangements and internal schematic connections can differ between manufacturers, engineers should confirm the land pattern, pin pitch, and schematic against official product drawings prior to finalizing board artwork.

Discrete Transformer vs. Integrated MagJack Solutions

Selecting between a discrete LAN transformer and an integrated MagJack involves several hardware design trade-offs:

  • Layout and Placement Flexibility: Discrete transformers allow engineers to place the magnetics independently on the PCB, optimizing the physical separation between the host PHY and the board edge.
  • Connector Selection Freedom: A discrete transformer architecture allows the design to be paired with a separate RJ45 connector, including standard right-angle jacks, vertical top-entry connectors, multi-port ganged arrays, or specialized enclosure-specific interfaces.
  • Thermal Separation: Separating the transformer from the physical I/O connector helps distribute heat dissipation across the board rather than concentrating thermal load at the front-panel connector cavity.

Architecture Comparison: Discrete Fast Ethernet Transformer vs. Alternative Implementations

Evaluation Metric LP1197NL
10/100BASE-T PoE Transformer
LP7019FNL
10GBASE-T PoE+ Transformer
Integrated 10/100BASE-T
PoE MagJack
Ethernet Data Rate 10/100BASE-T (Fast Ethernet) 10GBASE-T (Multi-Gigabit) 10/100BASE-T
PoE Capability Specified for PoE applications Specified for PoE+ applications Integrated PoE capability
Component Form Factor 16-Pin SMD (Open Frame) 24-Pin SMD (Open Frame) RJ45 connector with integrated magnetics
Operating Temperature -40°C to +85°C (Industrial) 0°C to +70°C Model-dependent
I/O Connector Selection Independent (Can be paired with a separate RJ45 connector) Independent (Can be paired with a separate RJ45 connector) Fixed by connector assembly
Primary Application PoE-enabled routers, SMPS, embedded I/O High-bandwidth 10G PoE+ routing Standard front-panel Ethernet ports

Application Considerations for LP1197NL

Target Application Profile Mounting / Packaging Primary Engineering Consideration
Networked Medical & Diagnostic Interfaces 16-Pin SMD / Tape & Reel Physical-layer galvanic isolation and compact surface-mount mounting for diagnostic instrumentation.
Commercial Routers & Set-Top Boxes 16-Pin SMD (6.20 mm Height) Cost-effective 10/100BASE-T Fast Ethernet signal coupling, automated SMT assembly compatibility.
Switched-Mode Power Supplies (SMPS) & Monitors 16-Pin SMD (-40°C to +85°C) -40°C to +85°C operating temperature range; PoE center-tap current path support.
Digital Cameras & Embedded Vision Units 16-Pin SMD Compact 12.70 x 9.30 mm board footprint preserves space for image processing circuitry.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LP1197NL, hardware engineers should confirm the following design parameters against the official datasheet:

  • Pinout and Schematic Alignment: Verify the 16-pin terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
  • PCB Land Pattern: Check pad dimensions, pitch, and solder mask clearances on the manufacturer's recommended footprint.
  • Package Clearances: Confirm the 6.20 mm package height and 12.70 mm x 9.30 mm footprint within the enclosure or card envelope.
  • PoE Power Circuitry: Ensure PCB copper trace widths connecting transformer center taps to PSE or PD power controllers meet the current requirements of the target PoE architecture.
  • Thermal Conditions: Validate that the component operating environment remains within the specified -40°C to +85°C industrial temperature range.
  • SMT Process Compatibility: Verify Tape & Reel feeder setup and SMT placement parameters for the open-frame package.

Frequently Asked Questions

Is the LINK-PP LP1197NL a compatible alternative to the Pulse H1197NL?

The LP1197NL is designed as a compatible alternative to the Pulse H1197NL with a 16-pin SMD open-frame package, 10/100BASE-T Fast Ethernet capability, PoE application support, 1CT:1CT turns ratio, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

How does the LP1197NL support Power over Ethernet (PoE)?

The LP1197NL is specified for Ethernet PoE applications, incorporating transformer center-tap terminations structured to carry DC power currents across the differential data pairs while maintaining Fast Ethernet signal isolation across an extended -40°C to +85°C operating range.

When should hardware designers select a discrete LAN transformer instead of an integrated MagJack?

A discrete LAN transformer is typically selected when the board layout requires physical separation between the Ethernet PHY and the board edge, when thermal dissipation needs to be distributed away from the I/O panel, or when the design uses non-standard, vertical, or ruggedized RJ45 connectors.

What is the package type and physical height of the LP1197NL?

The LP1197NL features an open-frame 16-pin surface-mount (SMD) construction with a package height of 6.20 mm (0.244 inches), length of 12.70 mm (0.500 inches), and width of 9.30 mm (0.366 inches), supplied in Tape & Reel format for automated SMT lines.

Does the LP1197NL support AutoMDX?

Yes. The product specification lists AutoMDX as supported. Engineers should verify the selected PHY interface and complete reference design before production use.

What is the operating temperature range for the LP1197NL?

The LP1197NL is rated for an extended industrial operating temperature range of -40°C to +85°C, making it suitable for outdoor gateways, power supply systems, and harsh industrial environments.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download