WE 749022015 Compatible LINK-PP LP6096ANL 1000 Base-T Single Port SMD 24 PIN PoE+ Telecom Transformer
P/N:
LP6096ANL
Manufacturer:
LINK-PP
Compatible Brand:
WE
Compatible P/N:
749022015
- Compatible Brands: Wurth
- Data Rate: 1000 BASE-T
- Mounting Type: Surface Mount
- Turns Ratio TX: 1CT:1CT
- Temperature: -40℃ TO +85°C
- Application -LAN: PoE+
- P/N: LP6096ANL
- Manufacture: LINK-PP
- Compatible Brand: WE
- Compatible P/N: 749022015
Packaging Details:
N.W/pCS:
0.004kg
Package:
Reel
SPQ:
400pcs
Qty/carton:
1600pcs
Carton size:
37*37*25cm
G.W/carton:
5.8kg
Product Specifications
| LINK-PP Part Number | LP6096ANL | WE Part Number Equivalent | 749022015 |
| Transformer Type | LAN Magnetic Transformer | Part Status | Active |
| Number of Ports | Single Port (1-Port) | Application-LAN | Ethernet (PoE+, IEEE 802.3at) |
| Speed | 10/100/1000BASE-T (Gigabit) | PIN Count | 24 Pins |
| Construction | Open Frame | Mounting Type | Surface Mount (SMD) |
| Cores per Port | 8 | Turns Ratio (RX/TX) | 1CT:1CT |
| Configuration (RX/TX) | T, C, S | AutoMDX | Yes |
| Package Length (Inches/mm) | 0.693 / 17.60 | Package Width (Inches/mm) | 0.650 / 16.51 |
| Package Height (Inches/mm) | 0.236 / 6.00 | Packaging | Tape & Reel |
| Operating Temperature | -40°C to +85°C (Industrial) | Standard Compliance | IEEE 802.3at, UL, RoHS, REACH |
Single-Port 10/100/1000BASE-T PoE+ Discrete LAN Transformer
The LINK-PP LP6096ANL is an industrial-grade single-port 10/100/1000BASE-T Gigabit Ethernet discrete LAN magnetic transformer module in a 24-pin surface-mount (SMD) open-frame configuration with Power over Ethernet Plus (PoE+, IEEE 802.3at) capability. Incorporating an internal 8-core magnetic architecture, 1CT:1CT turns ratio, integrated T, C, S choke and autotransformer structure, and AutoMDX support, the component supports Gigabit signal isolation, common-mode noise suppression, and PoE+ DC power carriage across the specified -40°C to +85°C operating temperature range.
Featuring a 6.00 mm vertical height, 17.60 mm length, and 16.51 mm width, the module is supplied in standard Tape & Reel packaging for high-speed automated SMT assembly. With center-tap windings engineered to handle continuous PoE+ DC currents up to 720 mA without magnetic core saturation, the LP6096ANL provides board-level magnetics suited for enterprise routers, rugged handheld field terminals, operation generators, and industrial communication controllers.
Compatibility and Design Positioning
The LINK-PP LP6096ANL is positioned as a cross-reference and alternative sourcing option for the Würth Elektronik (WE) 749022015 single-port Gigabit PoE+ LAN transformer. The two devices share matching 24-pin surface-mount footprints, open-frame construction, 1CT:1CT turns ratios, IEEE 802.3at PoE+ power capabilities, and an industrial -40°C to +85°C operating temperature rating. Engineering teams should verify pinout mapping, pad geometries, reflow soldering limits, and PHY transceiver interface guidelines against the applicable official drawings before approving component substitution.
Procurement and OEM Qualification
For sourcing teams and OEM engineering programs evaluating the LP6096ANL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, SMT solder pad coplanarity, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.
PoE+ Power Delivery and Board-Level Discrete Magnetics Optimization
Implementing Gigabit magnetics with PoE+ support in a discrete surface-mount package provides distinct layout and physical integration advantages for embedded hardware:
- IEEE 802.3at PoE+ Power Handling: Center-tap windings and internal chokes are engineered to conduct continuous DC bias currents up to 720 mA, delivering up to 30 W of DC power without saturating the magnetic cores or degrading data transmission.
- Physical I/O Connector Flexibility: Decoupling the magnetic isolation stage from the physical interface allows hardware designers to choose custom connectors, such as multi-port RJ45 blocks, ruggedized M12 circular connectors, or sealed IP67 terminal interfaces.
- 6.00 mm Vertical Height: The 6.00 mm housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
- -40°C to +85°C Industrial Operating Range: The -40°C to +85°C specification defines the stated operating temperature range of the assembly, ensuring signal stability in outdoor enclosures and power equipment subject to localized thermal heating.
- Tape & Reel SMT Packaging: Standard Tape & Reel packaging supports automated high-speed SMT assembly, protecting lead coplanarity and ensuring consistent manufacturing throughput.
Internal Magnetics Architecture, Gigabit Signaling, and AutoMDX
The LP6096ANL incorporates an internal 8-core magnetic architecture supporting the four differential pairs required for 10/100/1000BASE-T full-duplex Ethernet communication. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C, S configuration enables broad interface compatibility with standard voltage-mode and current-mode Gigabit PHY transceivers.
The internal magnetics combine isolation transformers, common-mode chokes, and autotransformer elements to suppress high-frequency conducted and radiated EMI while maintaining return loss and insertion loss performance. AutoMDX support enables automatic differential pair crossover detection. Electrical isolation complies with IEEE 802.3 specifications as defined in the product documentation, separating host silicon from cable-side transient events and common-mode noise.
Mechanical Envelope and SMT Manufacturing Considerations
When integrating the LP6096ANL into host hardware layouts, engineering teams should observe the following structural and manufacturing guidelines:
1. Package Dimensions and Vertical Clearance
The module body measures 17.60 mm (0.693 inches) in length, 16.51 mm (0.650 inches) in width, and 6.00 mm (0.236 inches) in height. Designers should confirm that PCB component spacing accommodates the 24-pin surface-mount footprint and allows adequate clearance for automated optical inspection (AOI).
2. 24-Pin SMD Land Pattern and Coplanarity
The module features 24 gull-wing leads arranged along two parallel rows. Accurate solder stencil aperture design and precise solder paste volume are critical to ensure uniform solder fillets across all 24 leads, maintain lead coplanarity, and prevent bridging between adjacent fine-pitch pads.
3. High-Current PoE+ PCB Trace Routing
Traces connecting the transformer center-tap pins to the external diode bridge and Powered Device (PD) or Power Sourcing Equipment (PSE) controller must be designed with sufficient copper width and weight to carry up to 720 mA continuous current without excessive DC resistance losses or localized board heating.
4. Open-Frame Construction and Convection Reflow Profile
The open-frame structure minimizes overall component mass and ensures uniform thermal distribution during convection reflow. SMT process engineers should configure the lead-free reflow curve in accordance with IPC/JEDEC J-STD-020 standards, observing the specified maximum peak temperature and time-above-liquidus limits.
Design Consideration Comparison: PoE+ Discrete Transformer vs. Alternative Implementations
| Design Consideration | LP6096ANL Single-Port PoE+ SMD Transformer |
Standard Non-PoE Gigabit SMD Transformer |
Integrated PoE+ Gigabit RJ45 MagJack |
|---|---|---|---|
| Power Delivery Capability | IEEE 802.3at PoE+ (Up to 30 W, 720 mA) | Non-PoE (Data only) | IEEE 802.3at PoE+ (Integrated power paths) |
| PCB Assembly Operations | Single SMT placement | Single SMT placement | Through-hole / hybrid placement |
| Physical Connector Selection | Complete flexibility (RJ45, M12, custom) | Complete flexibility (RJ45, M12, custom) | Fixed RJ45 port geometry |
| Vertical Height Envelope | 6.00 mm profile | ~5.50 mm – 6.00 mm profile | ~13.50 mm – 16.50 mm profile |
| Board Placement Location | Inner-board placement adjacent to PHY | Inner-board placement adjacent to PHY | Constrained to physical board edge |
| Primary Engineering Focus | PoE+ discrete power routing & connector flexibility | Standard data-only networking | Consolidated front-panel connector assembly |
Application Considerations for LP6096ANL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Enterprise Routers & Network Gateways | Transfers Gigabit data and handles PoE+ power extraction for connected wireless access points or network endpoints. |
| Rugged Handheld Devices & Field Terminals | 6.00 mm vertical height fits compact enclosures while delivering wired Gigabit connectivity and battery charging via PoE+. |
| Operation Generators & Power Controllers | -40°C to +85°C rating maintains signal integrity in high-vibration power generation environments exposed to thermal swings. |
| Industrial Vision & Surveillance Controllers | Enables pairing with ruggedized M12 connectors to deliver PoE+ power to external motorized or heated cameras. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials using the LP6096ANL, hardware engineers should confirm the following design parameters against official documentation:
- SMD Footprint and Pad Geometry: Verify 24-pin pad dimensions, pitch spacing, and solder mask expansion against the official LINK-PP LP6096ANL footprint drawing.
- PoE+ Trace Width and Copper Weight: Ensure host PCB copper traces connecting to the center-tap pins comply with IPC-2152 standards for 720 mA continuous DC current.
- Top-Layer PCB Keep-Out Zone: Ensure an unbroken copper keep-out zone is maintained directly beneath the open-frame module on the top PCB layer to prevent capacitive noise coupling.
- External Connector Protection & Termination: Place Bob Smith termination networks and TVS diode arrays near the physical connector interface to suppress ESD and common-mode transients.
- SMT Reflow Profile Compliance: Verify that the assembly facility's convection reflow thermal profile adheres to standard lead-free soldering thresholds for 24-pin open-frame components.
- Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified -40°C to +85°C industrial temperature range, factoring in PoE+ DC bias heating.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LP6096ANL?
The LP6096ANL is an industrial-grade single-port 10/100/1000BASE-T PoE+ (IEEE 802.3at) discrete LAN magnetic transformer module. It features a 24-pin surface-mount (SMD) open-frame construction, 8 magnetic cores, a 1CT:1CT turns ratio for both transmit and receive stages, AutoMDX support, Tape & Reel packaging, and an operating temperature range of -40°C to +85°C.
Is the LINK-PP LP6096ANL compatible with the WE 749022015?
The LP6096ANL is positioned as a cross-reference and alternative sourcing option for the Würth Elektronik (WE) 749022015. Both devices share matching 24-pin SMD footprints, open-frame profiles, 1CT:1CT turns ratios, IEEE 802.3at PoE+ capabilities, and industrial -40°C to +85°C temperature ratings. Engineering teams should cross-reference official product drawings before volume changeovers.
How does the LP6096ANL support Power over Ethernet Plus (PoE+)?
The LP6096ANL incorporates internal magnetic windings and center taps engineered to conduct continuous DC bias currents up to 720 mA (supporting up to 30 W per IEEE 802.3at). This allows simultaneous Gigabit differential data transmission and DC power delivery over twisted-pair Ethernet cables without saturating the magnetic cores.
Why choose a discrete PoE+ transformer over an integrated RJ45 MagJack?
Discrete LAN transformers allow hardware designers to place the magnetics directly adjacent to the PHY transceiver for optimal differential routing, while retaining complete flexibility in connector selection (such as ruggedized M12 circular connectors, custom RJ45 blocks, or sealed IP67 jacks). Additionally, with a height of only 6.00 mm, discrete modules fit inside compact handhelds and low-profile enclosures where integrated MagJacks are physically too tall.
What PCB layout guidelines apply beneath the LP6096ANL footprint?
A strict copper keep-out zone should be maintained directly under the LP6096ANL footprint on the top PCB layer. No high-speed digital traces, ground planes, or power planes should run beneath the open-frame magnetics to prevent capacitive noise coupling and preserve dielectric isolation between PHY-side and cable-side circuits.
What trace widths are recommended for the PoE+ center-tap power lines?
PCB copper traces routing from the transformer center taps to the diode bridge and PD/PSE power controller should be sized according to IPC-2152 guidelines to conduct up to 720 mA continuous DC current without excessive voltage drop or thermal rise, typically requiring a minimum width of 20 to 30 mils depending on copper weight.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































