HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJG26906ABNL-2.jpg
  • LPJG26906ABNL-2-1.jpg
  • LPJG26906ABNL-2-2.jpg
  • LPJG26906ABNL-2-3.jpg
  • LPJG26906ABNL-2-4.jpg

WE 7499121211 Compatible LINK-PP LPJG26906ABNL-2 10/100/1000 Base-T Tab Down Green/Yellow LED 1x2 Port Lan Ethernet RJ45

P/N:

LPJG26906ABNL-2

Manufacturer:

LINK-PP

Compatible Brand:

WE

Compatible P/N:

LPJG26906ABNL-2

  • Compatible Brands: Wurth
  • Number of Ports: 1X2
  • Speed: 10Base-T,100Base-TX,1000Base-T
  • PoE: Non-PoE
  • Latch: Down
  • LED Option: Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJG26906ABNL-2
  • Manufacturer: LINK-PP
  • Compatible Brand: WE
  • Compatible P/N: 7499121211

Packaging Details:

N.W/pCS:

0.017kg

Package:

Tray

SPQ:

30pcs

Qty/carton:

600pcs

Carton size:

37*30*30cm

G.W/carton:

10kg

Product Specifications

LINK-PP Part Number: LPJG26906ABNL-2 WE Part Number 7499121211
Part Status Active Connector Type Jack
Number of Positions/Contacts 10p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x2 Port Speed 10/100/1000 Base-T
Latch Down Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Green/Yellow
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.527/13.39 Package Length (Inches/mm) 0.839/21.30
Package Width (Inches/mm) 1.213/30.8 Temperature -40℃ TO 85℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

WE 7499121211 Compatible LINK-PP LPJG26906ABNL-2 10/100/1000Base-T 1x2 RJ45 Connector

Engineered to maximize faceplate I/O density and deliver uncompromising signal integrity in harsh environments, the LINK-PP LPJG26906ABNL-2 is a high-performance 1x2 (2-port) ganged Gigabit RJ45 modular jack with integrated magnetics. Designed to support robust full-duplex 10/100/1000Base-T (Gigabit Ethernet) throughput, this highly integrated MagJack consolidates two physical networking interfaces and their respective 8-core magnetic isolation circuits into a single, unified shielded block. Operating flawlessly within a rugged industrial temperature envelope of -40°C to +85°C, it provides an exceptionally stable, non-PoE physical layer interface for advanced Ethernet control systems, remote monitoring hubs, and network firewalls.

Manufactured under stringent ISO9001 and ISO14001 quality management protocols, the LPJG26906ABNL-2 guarantees full compliance with IEEE 802.3, UL, REACH, and RoHS regulatory standards. By integrating active signal conditioning and galvanic isolation into a robust 1x2 ganged form factor, hardware architects can drastically optimize printed circuit board (PCB) real estate and streamline automated chassis assembly workflows.

WE 7499121211 Cross-Reference & BOM Optimization

Developed as an exact form-fit-function compatible replacement for the Wurth Electronics (WE) 7499121211, the LPJG26906ABNL-2 empowers procurement teams and hardware engineers to secure their component supply chains and mitigate shortages. Delivering an identical printed circuit board (PCB) footprint, matched electrical impedance, and a precise 10P8C pin-out configuration, this cross-reference component acts as a seamless drop-in alternative. It facilitates rapid integration into existing motherboard layouts without the costly engineering overhead and delays associated with board respins or recertification.

High-Density 1x2 Ganged Architecture & EMI Shielding

The mechanical envelope of the LPJG26906ABNL-2 is meticulously optimized for spatial efficiency, structural rigidity, and superior electromagnetic compatibility (EMC).

  • 1x2 Port Matrix: Consolidating two Gigabit ports horizontally optimizes PCB real estate. This unified mechanical structure ensures precise port-to-port alignment, eliminating the tolerance stack-up issues associated with mounting standalone jacks side-by-side.
  • Port Configuration: 1x2 ganged, extended 10P8C RJ45 interface, Tab-Down orientation for streamlined, low-profile cable routing in compact desktop or rack-mount enclosures.
  • Mounting Profile: 90-degree right-angle (side entry) utilizing robust Through-Hole Technology (THT) soldering. Reinforced with heavy-duty T-post retaining structures designed to absorb the mechanical stress of frequent cable insertions across multiple ports.
  • EMI Containment: Enclosed in a continuous, heavy-duty metal shield equipped with active EMI grounding tabs. These tabs make direct electrical contact with the metallic chassis bezel, aggressively containing internal high-frequency emissions and blocking external Radio Frequency Interference (RFI).
  • Visual Diagnostics: Each port is equipped with integrated Green and Yellow LEDs, delivering immediate, localized visual feedback for Gigabit link status and network activity directly at the faceplate.

Integrated Gigabit Magnetics & Signal Integrity

Embedding the Ethernet isolation circuitry directly within the shielded 1x2 housing delivers vital board-level signal integrity benefits for high-speed multi-port arrays.

  • 8-Core Gigabit Magnetics: The internal transformers and common-mode chokes utilize an 8-core topology per port, precision-tuned for 1000Base-T transmission. This ensures pristine signal fidelity, minimized return loss, and aggressive suppression of common-mode noise across all four twisted pairs.
  • Galvanic Isolation: Delivers standard-compliant high-voltage electrical isolation between the external network cables and the sensitive internal Gigabit PHY transceivers, guarding against destructive ground loops and electrostatic discharge (ESD).
  • AutoMDIX Support: The internal 1CT:1CT transformer architecture fully supports AutoMDIX protocols, allowing the physical layer to automatically negotiate and correct straight-through or crossover cable configurations without manual intervention.

Hardware Layout & Routing Considerations

To extract optimal Gigabit performance from the LPJG26906ABNL-2, PCB layout engineers must meticulously route the 100-ohm differential pairs between the multi-channel Ethernet PHYs and the RJ45 pins. Because this is a ganged configuration, precise attention must be paid to trace length matching across both ports to prevent phase skew and near-end crosstalk (NEXT). Ensure that the chassis ground (tied to the connector’s EMI tabs) is physically isolated from the motherboard's digital ground plane to prevent capacitive noise coupling along the faceplate.

Typical Applications

Combining reliable industrial-grade thermal performance (-40°C to +85°C), robust EMI containment, and a dual-port horizontal density, the LPJG26906ABNL-2 is purpose-built for bandwidth-intensive control and monitoring equipment:

  • Industrial Automation & Control: Ethernet control and monitoring systems, Programmable Logic Controllers (PLCs), and distributed SCADA gateways operating in harsh factory environments.
  • Networking Infrastructure: Small form-factor enterprise edge servers, network firewalls, and unified threat management (UTM) appliances.
  • Security & Vision Systems: Dual-channel Networked Video Recorders (NVRs) and centralized IP camera distribution hubs requiring resilient data links.
  • Power & Energy: Substation environmental telemetry gateways and smart grid data loggers requiring robust galvanic isolation.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.