Pulse JX80-0019NL Compatible LINK-PP LPJ26404AFNL 10/100 Base-T 8p8c Tab Down Green/Green LED 1x2 Port RJ45 Jack
P/N:
LPJ26404AFNL
Manufacturer:
LINK-PP
Compatible Brand:
Pulse
Compatible P/N:
LPJ26404AFNL
- Compatible Brands: Pulse
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Down
- LED Option: Green / Green
- Shield EMI Tabs: YES
- Temperature: -40℃ to +85°C
- P/N: LPJ26404AFNL
- Manufacturer: LINK-PP
- Compatible Brand: Pulse
- Compatible P/N: JX80-0019NL
Packaging Details:
N.W/pCS:
0.015kg
Package:
Tray
SPQ:
30pcs
Qty/carton:
600pcs
Carton size:
37*30*30cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number | LPJ26404AFNL | Pulse Part Number | JX80-0019NL |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1x2 Port | Speed | 10/100BASE-T |
| Latch | Down | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Green / Green |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.536 / 13.61 | Package Length (Inches/mm) | 0.841 / 21.36 |
| Package Width (Inches/mm) | 1.228 / 31.18 | Temperature | -40°C to +85°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Pulse JX80-0019NL Compatible Dual-Port 1x2 10/100BASE-T Integrated RJ45 MagJack
The LINK-PP LPJ26404AFNL is a dual-port (1x2) horizontal integrated RJ45 MagJack engineered for 10/100BASE-T Fast Ethernet applications in harsh, wide-temperature non-PoE network architectures. Featuring a Tab-Down (bottom latch) orientation, an ultra-short package length of 21.36 mm (0.841 inches), and an extended operating temperature range of -40°C to +85°C, it combines two 8P8C modular interfaces, integrated 4-core isolation magnetics per port, Bob Smith termination, and Green/Green status LEDs inside a shielded through-hole housing.
The connector features a 90° right-angle, side-entry profile with perimeter EMI grounding tabs, T-Post mechanical PCB retention, and a 31.18 mm overall horizontal width. It is positioned as a compatible alternative to the Pulse JX80-0019NL for network interface cards (NICs), optical network terminals (ONT), industrial webcams, switching power controllers, and embedded computing systems where board depth, dual-port alignment, and upper panel clearances are primary design constraints.
Hardware designers should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY manufacturer interface guidelines against product documentation before releasing PCB layouts for production.
Pulse JX80-0019NL Compatible Design Positioning
The LPJ26404AFNL is positioned as a compatible alternative to the Pulse JX80-0019NL for 10/100BASE-T Fast Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package, footprint, and electrical interface characteristics.
To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and electrical characteristics against original design requirements prior to volume release.
Horizontal 1x2 Topology and Tab-Down Latch Geometry
Multi-port board layout and enclosure geometry influence connector selection for front-panel Ethernet interfaces:
- Unified 1x2 Dual-Port Alignment: Solder-mounting a single 1x2 ganged connector ensures consistent port spacing and precise alignment within a single 31.18 mm housing, eliminating cumulative assembly tolerances compared to placing two discrete single-port connectors.
- Tab-Down Accessibility: In systems where the connector is positioned near the upper edge of an enclosure, under an overhang, or beneath a display bezel, a standard Tab-Up latch can be difficult to reach. The Tab-Down (bottom latch) configuration places the plug release tab on the lower side, ensuring unobstructed cable disengagement.
- Compact 21.36 mm Package Length: Standard dual-port MagJacks commonly feature package lengths of 25.40 mm or greater. The LPJ26404AFNL's compact 21.36 mm depth frees valuable PCB space directly behind the connector, facilitating shorter trace routing to dual-channel PHY transceivers, decoupling capacitors, and power management circuits.
- Metal Shielding with EMI Tabs: Perimeter spring-finger grounding tabs around the metal shell establish multi-point contact with the equipment front panel or bezel cutout, supporting the system-level shielding and grounding architecture.
10/100BASE-T Signal Transmission and 4-Core Magnetics per Port
Fast Ethernet (100BASE-TX) communication utilizes two differential pairs per port: one dedicated to transmit (TX) and one to receive (RX). The LPJ26404AFNL incorporates an internal 4-core magnetic structure per channel (8 cores total across the 1x2 assembly) with a 1CT:1CT turns ratio (T, C configuration), providing galvanic isolation and common-mode filtering for both ports.
Specified for operation across -40°C to +85°C, the magnetic core materials maintain stable open-circuit inductance (OCL) and baseline wander compensation across harsh thermal excursions. Because the connector is engineered specifically for non-PoE architectures, the internal magnetic layout is dedicated to differential data transmission without allocating space or thermal margins to high-current DC power paths.
Hardware designers should evaluate the MagJack in conjunction with the host Fast Ethernet PHY transceivers, differential trace layout, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.
Mechanical and PCB Design Considerations
Physical mounting orientation and board anchoring are key considerations when integrating dual-port through-hole RJ45 jacks:
1. 8P8C Interface per Port and PCB Termination
Each port features a standard 8-contact RJ45 mating face alongside through-hole termination pins on the PCB side. The terminal pins accommodate differential data lines, common-mode termination references, and integrated LED connections.
Engineers should consult the official mechanical drawing to verify pin pitch, drill diameters, and trace clearance requirements before releasing board artwork.
2. T-Post Mechanical Retention
Molded T-Post locating pegs anchor the dual-port connector body securely to the FR4 PCB. They assist in absorbing lateral and axial forces during simultaneous cable insertion and extraction, supporting solder-joint reliability under mechanical stress.
3. Status LED Indicators
The connector incorporates Green LEDs on both the left and right positions of each port for visual link and network activity indication. Current-limiting resistors and drive circuits must be implemented on the host PCB in accordance with PHY specifications and LED electrical ratings.
Architecture Comparison: Dual-Port 1x2 MagJack vs. Alternative Implementations
| Evaluation Metric | LPJ26404AFNL 1x2 Tab-Down 10/100 MagJack |
2 x Single-Port 10/100 MagJacks |
Stacked 2x1 10/100 MagJack |
|---|---|---|---|
| Port Configuration | 1x2 Horizontal Ganged | 2 x Discrete Single Ports | Stacked 2x1 (Vertical 2-Port) |
| Vertical Height Profile | Low-Profile (~13.61 mm) | Low-Profile (~13.50 mm) | Tall (~25.50 mm) |
| Operating Temperature | -40°C to +85°C (Industrial) | Model-dependent | Model-dependent |
| Package Length (Depth) | Compact (21.36 mm / 0.841 in) | Typically 25.25 mm – 32.50 mm | Typically 28.50 mm |
| Latch Orientation | Tab-Down (Bottom Latch) | Tab-Up or Tab-Down | Dual Latch (Both) |
| Assembly Placement | Single placement cycle | Two individual placements required | Single placement cycle |
| Primary Advantage | Low vertical profile with compact depth for dual I/O | Flexible port spacing | Saves horizontal board-edge space |
Application Considerations for LPJ26404AFNL
| Target Application Profile | Potential Plating Option | Primary Engineering Consideration |
|---|---|---|
| Network Interface Cards & Server Adapters | Gold 15µ" / 30µ" | Low-profile 13.61 mm height fits PCIe bracket envelopes; dual-port consolidation reduces component count. |
| Optical Network Terminals (ONT) & Gateways | Gold 15µ" | -40°C to +85°C operating range, compact 21.36 mm length, perimeter EMI tabs for enclosure bonding. |
| Switching Power Supply Management Boards | Gold 6µ" / 15µ" | Stable physical-layer isolation, T-Post mechanical PCB anchoring against vibration. |
| Industrial Box PCs & Security Webcams | Gold 15µ" / 30µ" | Dual-port 10/100BASE-T connectivity; Tab-Down latch facilitates maintenance access in tight enclosures. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJ26404AFNL, hardware engineers should confirm the following design parameters against the official product drawing:
- Package Dimensions & Clearances: Verify the 13.61 mm height, 21.36 mm length, and 31.18 mm width against internal enclosure clearances.
- Pinout and Schematic Alignment: Verify the terminal numbering, center-tap connections, and differential-pair assignments against the official product drawing and selected PHY reference design.
- Tab-Down Latch Clearance: Ensure adequate clearance below the front-panel cutout for RJ45 plug latch disengagement during maintenance.
- PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint drawing.
- EMI Tab Contact Geometry: Confirm front-panel cutout dimensions ensure continuous mechanical contact with the shield EMI spring tabs.
- LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the selected PHY.
- Thermal Operating Environment: Confirm the operating environment remains within the specified -40°C to +85°C industrial temperature range.
Frequently Asked Questions
Is the LINK-PP LPJ26404AFNL a compatible alternative to the Pulse JX80-0019NL?
The LPJ26404AFNL is designed as a compatible alternative to the Pulse JX80-0019NL with a dual-port (1x2) 10/100BASE-T MagJack configuration, Tab-Down latch, compact 21.36 mm package length, 8P8C pinout per port, Green/Green LEDs, T-Post PCB retention, metal shield with EMI tabs, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.
What is the mechanical advantage of a 1x2 horizontal ganged connector?
A 1x2 horizontal ganged connector integrates two ports into a single rigid 31.18 mm housing, maintaining precise port pitch and simplifying front-panel cutout alignment. It also reduces component placement cycles compared to mounting two separate single-port connectors.
What is the design benefit of the Tab-Down latch and 21.36 mm package length?
The Tab-Down latch places the release tab on the bottom of the connector, facilitating plug removal when mounted near the upper edge of an enclosure or under a display bezel. The compact 21.36 mm length reduces board depth requirements, freeing space behind the connector for host-board routing.
What is the significance of the -40°C to +85°C operating temperature rating?
The -40°C to +85°C rating indicates that the internal magnetics, winding insulation, and housing materials maintain required electrical isolation, baseline wander compensation, and signal coupling across industrial temperature extremes, making the connector suitable for outdoor cameras, switching power controllers, and harsh factory environments.
Is the LPJ26404AFNL suitable for Power over Ethernet (PoE)?
No. The LPJ26404AFNL is specified as a Non-PoE connector for data-only Fast Ethernet interfaces. For systems requiring PoE power delivery, a MagJack with dedicated PoE-rated magnetics and DC current paths should be selected.
What contact plating options are available for the LPJ26404AFNL?
The LPJ26404AFNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































