LPJD0011-8BENL 10/100 Base-T RJ45 Vertical Connector With Integrated Magnetics Green/Yellow Led
P/N:
LPJD0011-8BENL
Manufacturer:
LINK-PP
Compatible Brand:
LINK=PP
Compatible P/N:
LPJD0011-8BENL
- Compatible Brands: LINK-PP
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Up
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJD0011-8BENL
- Manufacturer: LINK-PP
- Compatible Brand: LINK=PP
- Compatible P/N: LPJD0011-8BENL
Packaging Details:
N.W/pCS:
0.008kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
9kg
Product Specifications
| LINK-PP Part Number | LPJD0011-8BENL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 10P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100BASE-T |
| Latch | Up | Cores per Port | 4 |
| Orientation | 180° Angle (Top Entry) | PCB Mount Angle | THT Solder (Vertical) |
| Shield EMI Tabs | Without | LED Option | Green / Yellow |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.657 / 16.70 | Package Length (Inches/mm) | 0.665 / 16.90 |
| Package Width (Inches/mm) | 0.636 / 16.15 | Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Single-Port 10/100BASE-T Vertical Top-Entry RJ45 MagJack for Intercom and Embedded Industrial Assemblies
The LINK-PP LPJD0011-8BENL is a single-port integrated RJ45 MagJack engineered for 10/100BASE-T Fast Ethernet applications in non-PoE network designs. Featuring a 180° vertical top-entry orientation, it integrates the 8P8C modular interface, 4-core isolation magnetics, Bob Smith termination, and status LEDs inside a compact through-hole housing, allowing network cables to mate perpendicular to the host PCB.
The connector features a compact 16.90 mm length and 16.15 mm width footprint, combined with a 16.70 mm vertical package height. Built with a smooth metal shield (without external EMI tabs), T-Post mechanical PCB retention, and a commercial operating temperature range of 0°C to +70°C, it is suited for vertical panel designs, intercom units, industrial PC motherboards, machine inverters, and embedded automation modules.
Hardware engineers should review the mechanical drawing, pin assignment, PCB footprint, and electrical characteristics against the PHY manufacturer's guidelines before finalizing board layouts for production.
Vertical Top-Entry Orientation in Panel-Mounted and Enclosure Designs
Standard right-angle (90°) RJ45 connectors require placement along the outer edge of a PCB, constraining the board to sit perpendicular to the equipment I/O panel. In contrast, the 180° vertical top-entry configuration of the LPJD0011-8BENL allows the host PCB to mount parallel to the front or top panel of the enclosure.
This vertical orientation enables direct top-down or front-face cable insertion, which is often required in intercom stations, DIN-rail automation housings, machine control panels, and compact embedded enclosures where edge-mounted connectors cannot be accommodated.
When selecting a vertical MagJack, mechanical designers must account for vertical connector height (16.70 mm) plus the additional clearance required for the patch cable plug body and minimum bend radius within the enclosure.
10/100BASE-T Signal Transmission and 4-Core Magnetics Architecture
Fast Ethernet (100BASE-TX) communication utilizes two differential pairs: one dedicated to transmit (TX) and one to receive (RX). The LPJD0011-8BENL incorporates an internal 4-core magnetic design that provides isolation transformation and common-mode filtering specifically for these two active pairs.
Because the connector is engineered for dedicated non-PoE architectures, the internal magnetic layout is optimized for data transmission without the spatial or thermal overhead of DC power center taps. This enables a compact 16.90 x 16.15 mm footprint while maintaining electrical isolation and physical-layer signal coupling.
Hardware designers should evaluate the MagJack in conjunction with the host 10/100 Ethernet PHY, differential trace routing, ground plane design, and enclosure EMC strategy to ensure proper physical-layer performance.
Mechanical and PCB Design Considerations
Physical mounting orientation and board anchoring are key considerations when integrating vertical through-hole RJ45 jacks:
1. 10P8C Interface and Vertical PCB Layout
The 10P8C configuration features an 8-contact RJ45 mating face alongside 10 through-hole pins on the PCB side. These pins accommodate the differential transmit/receive lines, common-mode termination references, and integrated LED connections.
Because vertical pinout geometries differ significantly from right-angle connectors, designers should obtain the official mechanical footprint to verify drill sizes, pad spacing, and trace escape routing.
2. Shield Construction Without External EMI Tabs
The LPJD0011-8BENL is built with a smooth outer metal shield without external spring-finger EMI tabs. This design is suited for enclosures where the connector passes through a close-tolerance panel cutout or where internal clearance around the front bezel prevents the use of protruding grounding tabs.
Chassis grounding and EMC performance should be managed through the soldered shield ground pins and board-level ground plane connections.
3. T-Post Mechanical Retention
A molded T-Post locating peg anchors the connector body securely to the PCB. In vertical connectors, the retention post helps absorb perpendicular axial forces during cable insertion and extraction, reducing mechanical stress on the through-hole solder joints.
Integrated MagJack Architecture: Magnetics, BST, and LED Functions
The LPJD0011-8BENL consolidates several interface functions within a single vertical component:
- 4-Core Integrated Magnetics: Houses an internal 4-core magnetic structure with a 1CT:1CT turns ratio (T, C configuration) specified for 10/100BASE-T physical-layer implementations.
- BST Termination: Integrates Bob Smith termination networks to provide common-mode line termination directly inside the connector body.
- Port Status LEDs: Features integrated Green and Yellow LEDs for direct link and activity indication. Drive circuitry and current-limiting resistors must be implemented on the host PCB according to PHY specifications.
- AutoMDX Support: Specified for AutoMDX-compatible Ethernet PHY implementations.
- Through-Hole Metal Shield: Provides continuous mechanical protection and ground reference through soldered PCB shield pins.
Architecture Comparison: Vertical Top-Entry MagJack vs. Alternative Configurations
| Evaluation Metric | LPJD0011-8BENL 10/100 Vertical MagJack |
Right-Angle 90° 10/100 MagJack |
Vertical Non-Magnetic Jack + Discrete Magnetics |
|---|---|---|---|
| Cable Mating Direction | 180° Vertical (Perpendicular to PCB) | 90° Right-Angle (Parallel to PCB) | 180° Vertical (Perpendicular to PCB) |
| PCB Placement Flexibility | Interior or center board placement | Restricted to PCB board edge | Interior or center board placement |
| Magnetics Integration | 4-Core integrated inside housing | 4-Core integrated inside housing | Separate discrete magnetic IC on PCB |
| PCB Component Count | Reduced — consolidates jack, magnetics, LEDs | Reduced | Higher — separate connector and magnetics module |
| Shielding Style | Smooth shield (Without EMI tabs) | Typically with EMI tabs | Varies by selected connector |
| Primary Advantage | Enables top-facing or parallel-panel designs | Standard front-panel edge I/O | Independent selection of transformer module |
Application Considerations for LPJD0011-8BENL
| Target Application Profile | Potential Plating Option | Primary Engineering Consideration |
|---|---|---|
| Intercom Systems & Building Access Panels | Gold 6µ" / 15µ" | Vertical top-entry mating fits shallow wall-mount enclosures with parallel PCB mounting. |
| Industrial PCs & Embedded Box Motherboards | Gold 15µ" / 30µ" | Top-facing I/O ports for internal expansion boards and compact automation enclosures. |
| Machine Inverters & Motor Drives | Gold 15µ" | Perpendicular cable routing inside industrial drive cabinets; reliable Fast Ethernet interfacing. |
| Commercial Routers & Gateway Hardware | Gold 6µ" / 15µ" | Cost-effective 10/100BASE-T connectivity, integrated LEDs, and simplified physical-layer layout. |
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJD0011-8BENL?
The LPJD0011-8BENL is a single-port vertical 180° top-entry RJ45 MagJack designed for 10/100BASE-T Fast Ethernet. It features an integrated 4-core magnetic structure, 10P8C pinout, Green and Yellow status LEDs, T-Post PCB retention, a smooth metal shield without EMI tabs, and an operating temperature range of 0°C to +70°C.
What is the mechanical advantage of a 180° vertical top-entry RJ45 connector?
A 180° vertical top-entry connector allows Ethernet cables to be inserted perpendicularly to the PCB surface. This enables the printed circuit board to mount parallel to the equipment enclosure faceplate, which is advantageous in shallow housings such as intercom stations, wall-mount controllers, and vertical machine panels.
Is the LPJD0011-8BENL suitable for Power over Ethernet (PoE) applications?
No. The LPJD0011-8BENL is specified as a Non-PoE connector for data-only 10/100BASE-T Ethernet interfaces. For applications requiring PoE power delivery, an RJ45 MagJack with dedicated PoE-rated magnetics and DC current-carrying capability should be selected.
Why does the LPJD0011-8BENL feature a shield without external EMI tabs?
The tabless smooth shield design is intended for enclosures where the connector passes through a tight-clearance bezel cutout or where external spring tabs are not required for mechanical fit. Grounding continuity is maintained through the soldered through-hole shield pins connected to the PCB ground plane.
What function does the 4-core magnetic design serve?
The 4-core magnetic structure integrates isolation transformers and common-mode chokes for the two differential pairs (transmit and receive) used in 10/100BASE-T Fast Ethernet, providing physical-layer signal coupling and common-mode noise filtering.
What gold plating options are available for the contact mating area?
The LPJD0011-8BENL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































