HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LQD-CW400-LR4C-1.jpg
  • LQD-CW400-LR4C.jpg
  • LQD-CW400-LR4C-2.jpg
  • LQD-CW400-LR4C-3.jpg
  • LQD-CW400-LR4C-4.jpg

FS QSFPDD-LR4-400G 1310nm 10km SMF Optical Transceiver Modules Compatible LINK-PP LQD-CW400-LR4C 400GBASE-LR4 QSFP-DD

P/N:

LQD-CW400-LR4C

Manufacturer:

LINK-PP

Compatible Brand:

FS

Compatible P/N:

QSFPDD-LR4-400G

  • Compatible Brands: FS
  • Form Factor: QSFP-DD
  • Data Rate: 400G
  • Distance: ≤10km
  • Connector: Duplex LC
  • Model: LR4
  • Wavelength: 1310nm
  • P/N: LQD-CW400-LR4C
  • Manufacture: LINK-PP
  • Compatible Brand: FS
  • Compatible P/N: QSFPDD-LR4-400G

Product Specifications

LINK-PP Part Number LQD-CW400-LR4C FS Part Number QSFPDD-LR4-400G
Form Factor QSFP-DD Max Data Rate 400Gbps
Wavelength 1310nm Max Cable Distance 10km
Connector Duplex LC (UPC) Media SMF
Transmitter Type CWDM EML Receiver Type PIN
Max power consumption 9.5W Protocols IEEE 802.3bs, QSFP-DD MSA
DDM/DOM Supported Case Temperature range 0°C to +70°C
Warranty 5 Years    

FS QSFPDD-LR4-400G Compatible LINK-PP LQD-CW400-LR4C 400GBASE-LR4 QSFP-DD Transceiver Technical Overview

The LINK-PP LQD-CW400-LR4C (engineered as a direct optical, electrical, and firmware drop-in replacement for FS.com QSFPDD-LR4-400G) is a hyperscale-grade 400GBASE-LR4 QSFP-DD optical transceiver module delivering 400 Gbps aggregate bandwidth over 10 km on standard Single-Mode Fiber (SMF, G.652) via Duplex LC (UPC) connectors. Powered by an internal DSP gearbox converting 8x 53.125 Gb/s PAM4 electrical lanes into 4x 106.25 Gb/s PAM4 optical channels over a 1310nm CWDM EML laser array, a PIN receiver with optical DEMUX, and CMIS-compliant Digital Diagnostic Monitoring (DDM/DOM), it provides an energy-efficient (≤9.5W) long-reach interconnect solution backed by a 5-Year Warranty.

  • 400G PAM4 DSP Gearbox Architecture: Integrates a high-performance DSP chip that gearboxes 8 electrical lanes of 50G PAM4 into 4 optical CWDM lanes of 100G PAM4, compliant with IEEE 802.3bs, QSFP-DD MSA, and 100G Lambda MSA standards.
  • 4-Lane CWDM EML Optical Engine: Multiplexes four 106.25 Gbps PAM4 optical channels across the CWDM grid (1271nm, 1291nm, 1311nm, 1331nm) onto a single duplex LC SMF cable pair, bypassing expensive multi-fiber MTP/MPO trunks.
  • Thermal-Optimized ≤9.5W Power Budget: Energy-efficient optical driver and 7nm/12nm DSP design keep maximum power draw at ≤9.5W, preventing port thermal throttling in dense 32-port 1U 400G switches.
  • Multi-Vendor Interoperability & 5-Year Warranty: Fully pre-coded for FS.com, Cisco, Arista, Juniper, and Dell 400G platforms, providing true plug-and-play deployment backed by a 5-Year Warranty.

LINK-PP LQD-CW400-LR4C 400GBASE-LR4 QSFP-DD Optical Transceiver Overview

LINK-PP LQD-CW400-LR4C is a hot-pluggable 400Gbps QSFP-DD Double-Density optical transceiver module engineered for long-reach hyperscale data center interconnects up to 10 kilometers. Utilizing four uncooled 100G CWDM EML lasers, an optical de-multiplexer, Duplex LC (UPC) optical interfaces, and full Digital Diagnostic Monitoring (DDM/DOM) capabilities, this module maintains clean PAM4 eye diagrams and ultra-low post-FEC bit error rates. Pre-coded for seamless compatibility with FS.com hardware, it serves as a fully qualified secondary-source replacement for FS QSFPDD-LR4-400G OEM transceivers.

Key Benefits of LINK-PP LQD-CW400-LR4C / FS QSFPDD-LR4-400G Compatible Transceiver

  • Full 400G Speed over Duplex LC Single-Mode Fiber: Transmits 400 Gbps aggregate bandwidth over a standard Duplex LC SMF pair, avoiding the high cost and density penalties of 16-fiber parallel MTP/MPO cabling plants used by 400G-SR8 or 400G-DR4 optics.
  • Advanced PAM4 DSP Gearbox for Low BER & Clean Eye Diagrams: Houses an advanced digital signal processor (DSP) with integrated Host and Line Forward Error Correction (FEC) engine, compensating for chromatic dispersion and transmission noise over 10 km G.652 SMF.
  • Energy-Efficient Thermal Design (≤9.5W Max Power Draw): Draws ≤9.5W under full load, complying with strict thermal dissipation requirements in high-density 400G spine switches and core routers.
  • CMIS Compliant Digital Diagnostic Monitoring (DDM/DOM): Features comprehensive telemetry reporting mapped per Common Management Interface Specification (CMIS), providing real-time visibility into per-lane optical TX power, RX power, EML laser bias current, module voltage, and operating temperature.
  • Seamless Secondary Sourcing backed by 5-Year Warranty: Pre-programmed EEPROM firmware guarantees error-free initialization in FS.com, Cisco, Arista, Juniper, and Dell switches, fully covered by a 5-Year replacement warranty.

400GBASE-LR4 PAM4 Optics & CWDM EML Architecture

The LINK-PP LQD-CW400-LR4C operates under the 400GBASE-LR4 protocol defined in IEEE 802.3bs and QSFP-DD MSA hardware specifications, utilizing 4-level Pulse Amplitude Modulation (PAM4) to transmit 400 Gbps aggregate optical data.

CWDM Wavelength Grid & 100G Lambda PAM4 Gearbox

The electro-optic engine utilizes four CWDM Electro-absorption Modulated Lasers (EML) centered on the ITU G.694.2 grid: 1271nm, 1291nm, 1311nm, and 1331nm. Internal DSP gearbox circuitry takes 8 electrical input lanes running at 53.125 Gb/s PAM4 and multiplexes them into 4 optical channels running at 106.25 Gb/s PAM4. On the receive side, an optical de-multiplexer separates the incoming composite 400G signal and routes each 100G wavelength to high-sensitivity PIN photodiodes, delivering a robust 10 km single-mode link budget.

CMIS & Digital Diagnostic Monitoring (DDM/DOM) Telemetry

Utilizing an I2C 2-wire serial interface mapped per CMIS 4.0/5.0 standards, the transceiver provides granular telemetry. Network operations engineers can query live transceiver diagnostics per lane—including optical launch power, receive power, and EML bias current—allowing proactive link budget tracking and fault isolation across 10km data center interconnects.

Switch Interoperability & ≤9.5W Thermal Efficiency

High thermal density in 32-port 1U 400G switches requires strict power budget control. The LQD-CW400-LR4C addresses this through energy-efficient 7nm/12nm DSP architecture and low-power EML laser drivers.

≤9.5W Power Dissipation & Plug-and-Play EEPROM

Operating at ≤9.5W max per port, the LQD-CW400-LR4C prevents heat accumulation in switch line cards. Pre-programmed with accurate vendor EEPROM data maps, it passes host optical verification in FS.com, Cisco, Arista, and Juniper 400G switches without manual CLI overrides or throwing vendor-lock alarms.

Target Applications: Hyperscale Data Centers, 400GbE Core, and DCI

Combining 400Gbps PAM4 aggregate speed, 10km CWDM SMF reach, CMIS DDM/DOM telemetry, and FS.com compatibility, the LINK-PP LQD-CW400-LR4C supports critical optical infrastructure:

  • Hyperscale Data Center Spine-to-Leaf & Core Interconnects: Ideal for high-density 400GbE inter-rack spine-to-leaf connections and campus building-to-building backbones up to 10 km.
  • 400GbE Enterprise Core Routers & Aggregation Switched Fabrics: Deployed in next-generation enterprise core routers and 400G cloud switching platforms requiring long-reach LC duplex optics.
  • Data Center Interconnect (DCI) & Metro Optical Transport: Suitable for metro optical transport networks, DCI link extensions, and service provider 400G backhaul.

How to Select and Verify LQD-CW400-LR4C vs. FS QSFPDD-LR4-400G

Network architects and optics procurement specialists evaluating the LINK-PP LQD-CW400-LR4C as a secondary-source alternative for FS QSFPDD-LR4-400G should verify the following core parameters:

  • Optical Cable & Connector Matching: Confirm that your installed fiber cabling uses 9/125µm Single-Mode Fiber (SMF, G.652) with Duplex LC (UPC) connectors, rather than 16-fiber parallel MTP/MPO cables used by 400G-DR4 or 400G-SR8 optics.
  • 10km Link Budget & Distance Verification: Ensure your fiber link distance does not exceed 10 kilometers (6.2 miles) and total optical attenuation remains within the 400GBASE-LR4 power budget.
  • CMIS DDM Telemetry Verification: Verify per-lane optical power levels via switch CLI commands such as `show interfaces transceiver` or `show controller optics` to inspect individual CWDM channel launch and receive power levels.
  • Power Consumption Budget & Warranty: Confirm that host switch port thermal budgets accommodate ≤9.5W per QSFP-DD slot, and verify the 5-Year replacement warranty.

Frequently Asked Questions

Is LINK-PP LQD-CW400-LR4C compatible with FS.com QSFPDD-LR4-400G?

Yes. LINK-PP LQD-CW400-LR4C is a 100% optical, electrical, and firmware drop-in replacement for FS.com QSFPDD-LR4-400G, pre-programmed for seamless compatibility with FS.com, Cisco, Arista, Juniper, and Dell 400G switches.

What optical cable type and connector are required for LQD-CW400-LR4C?

The module operates over standard 9/125µm Single-Mode Fiber (SMF, G.652) using Duplex LC (UPC) connectors, supporting maximum link distances up to 10 km (6.2 miles).

How does the DSP gearbox convert electrical lanes to optical lanes in 400GBASE-LR4?

The internal DSP gearbox converts 8 electrical input channels of 53.125 Gb/s PAM4 into 4 optical output channels of 106.25 Gb/s PAM4 across four CWDM wavelengths (1271nm, 1291nm, 1311nm, 1331nm) via CWDM EML lasers.

Does LINK-PP LQD-CW400-LR4C support DDM/DOM optical diagnostics?

Yes. The module features full DDM / DOM support compliant with CMIS 4.0/5.0, providing real-time telemetry monitoring for per-lane TX power, RX power, bias current, supply voltage, and internal temperature.

What is the maximum power consumption of LQD-CW400-LR4C?

The module features an energy-efficient power draw rated at ≤9.5W max, ensuring cool operation and thermal compatibility with dense 32-port 1U 400G switch chassis.

What warranty is provided with the LINK-PP LQD-CW400-LR4C transceiver?

The LINK-PP LQD-CW400-LR4C transceiver is backed by a 5-Year replacement warranty, ensuring long-term operational reliability in enterprise and cloud data center environments.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

400G QSFP-DD Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify QSFPDD-LR4-400G compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

400G QSFP-DD Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

SFP Download