Dell AOC-QSFP28-100G-3M Compatible LINK-PP 100G QSFP28 Active Optical Cable 3m (10ft)
P/N:
LQ-AOC11100-3M
Manufacturer:
LINK-PP
Compatible Brand:
Dell
Compatible P/N:
AOC-QSFP28-100G-3M
- Compatible Brands: DELL
- Form Factor: QSFP28
- Data Rate: 100G
- Cable Length: 3m
- P/N: LQ-AOC11100-3M
- Manufacture: LINK-PP
- Compatible Brand: Dell
- Compatible P/N: AOC-QSFP28-100G-3M
Product Specifications
| LINK-PP Part Number | LQ-AOC11100-3M | Dell Part Number | AOC-QSFP28-100G-3M |
| Form Factor | QSFP28 to QSFP28 | Max Data Rate | 100Gbps |
| Cable Length | 3m (10ft) | Cable Type | Optical Cable |
| Wavelength | 850nm | Minimum Bend Radius | 7.5mm |
| Transmitter Type | VCSEL | Receiver Type | PIN |
| Power supply | 3.3V | CDR | Support |
| Case Temperature | 0 to 70°C | Protocols | 100G Ethernet |
Dell AOC-QSFP28-100G-3M Compatible LINK-PP LQ-AOC11100-3M 100G QSFP28 AOC Technical Overview
The LINK-PP LQ-AOC11100-3M is a 3-meter (10ft) 100G QSFP28 to QSFP28 Active Optical Cable (AOC) assembly engineered as a 100% drop-in alternative for Dell AOC-QSFP28-100G-3M in high-density data center and enterprise networking platforms. Integrating four 25.78Gbps NRZ parallel optical lanes using 850nm VCSEL transmitters and PIN receivers over multimode fiber, it delivers 100Gbps aggregate throughput, integrated dual-end CDR, an ultra-tight 7.5mm bend radius, and full EEPROM compatibility for Dell EMC PowerSwitch, PowerEdge servers, and InfiniBand EDR fabrics.
- Form Factor & Cable Length: QSFP28 to QSFP28 Active Optical Cable Assembly (3-meter / 10ft length, 7.5mm minimum bend radius).
- Protocol & Speed Ecosystem: Compliant with 100GBASE-SR4 Ethernet, InfiniBand EDR (100G), 128G Fibre Channel, and SFF-8665 / SFF-8636 QSFP28 MSA standards.
- Optical Technology & CDR: 850nm VCSEL transmitter array, PIN photodiode receiver array, and dual-end Tx/Rx Clock and Data Recovery (CDR) operating on 3.3V power supply (0°C to +70°C).
- Cross-Reference Sourcing: LINK-PP LQ-AOC11100-3M provides a direct plug-and-play equivalent to Dell AOC-QSFP28-100G-3M to support multi-source procurement strategies and BOM cost optimization.
Dell AOC-QSFP28-100G-3M Compatible LINK-PP LQ-AOC11100-3M Product Overview
LINK-PP LQ-AOC11100-3M (Dell AOC-QSFP28-100G-3M equivalent) is a 3-meter hot-pluggable QSFP28 Active Optical Cable designed for short-range 100 Gigabit Ethernet and InfiniBand EDR interconnect applications. Pre-terminated with QSFP28 optical transceivers at both ends and programmed with Dell EMC system firmware, this 100G AOC cable provides low power consumption, superior signal integrity, and flexible rack routing across Top-of-Rack (ToR) switches, server network interface cards (NICs), and high-performance computing (HPC) clusters (0°C to +70°C).
Key Benefits of LINK-PP LQ-AOC11100-3M 100G QSFP28 AOC (Dell Compatible)
- 100% Dell EMC System Hardware Compatibility: Pre-coded with OEM EEPROM firmware to ensure seamless recognition and error-free port initialization on Dell PowerSwitch (S5200/S6100 series), PowerEdge servers, and Force10 platforms.
- 100Gbps Parallel Optical Throughput: Combines four 25.78125 Gb/s electrical lanes into an aggregate 100G optical link, supporting 100GbE, InfiniBand EDR, and 128G Fibre Channel protocols.
- Ultra-Tight 7.5mm Bend Radius & Lightweight Cable Routing: Flexible multimode fiber cable profile is significantly thinner and lighter than 3m copper DAC cables, improving cabinet airflow and reducing cable tray strain in dense 42U racks.
- Signal Integrity & Low Bit Error Rate (BER < 1E-12): Integrated transmitter and receiver Clock and Data Recovery (CDR) re-times high-speed signals, suppressing jitter over 3-meter interconnects.
- Low Power Consumption & Thermal Efficiency: Operates on a standard 3.3V power supply with low power dissipation per cable end, reducing overall rack cooling budgets compared to traditional transceiver/LC patch cord combinations.
- Multi-Source Drop-In Availability: Industry-standard SFF-8665 MSA compliance enables secondary sourcing strategies for data center supply chain diversification.
100G QSFP28 Active Optical Cable Architecture & Dell Ecosystem Compatibility
Engineered in compliance with SFF-8665 and SFF-8636 QSFP28 MSA specifications, the LINK-PP LQ-AOC11100-3M (compatible with Dell AOC-QSFP28-100G-3M) incorporates four independent transmit and receive optical channels operating at 25.78125 Gb/s per lane. The factory-terminated 3-meter multimode fiber assembly eliminates optical connector face contamination risks associated with field-patching MTP/MPO optical cables.
850nm VCSEL Array & Integrated CDR Signal Conditioning
The optical transmit side utilizes a 4-channel 850nm VCSEL (Vertical-Cavity Surface-Emitting Laser) array, while the receive side employs a high-sensitivity PIN photodiode array. Integrated dual-end Tx and Rx Clock and Data Recovery (CDR) circuitry re-times incoming electrical signals, ensuring ultra-low jitter transmission and maintaining a Bit Error Rate (BER) better than 1E-12 across Dell PowerSwitch backplanes and server adapters.
Mechanical Cable Design & Airflow Advantage vs 3m 100G DAC Cables
For 3-meter 100G intra-rack and adjacent-rack interconnects, hardware architects frequently evaluate Active Optical Cables (AOC) against Direct Attach Copper (DAC) cables:
- Flexibility & Minimum Bend Radius: At 3 meters, 100G DAC cables require thick 26AWG/28AWG copper conductors with a rigid ~35mm bend radius. The LQ-AOC11100-3M optical cable features an ultra-tight 7.5mm bend radius, enabling smooth routing around tight cable management arms.
- Weight & Airflow Optimization: The lightweight 3m optical cable profile reduces bulk in high-density cable trays, preventing cold-aisle/hot-aisle exhaust airflow blockages behind Dell PowerEdge server chassis.
- EMI Immunity: Multimode fiber cable construction is immune to electromagnetic interference (EMI) and radio frequency interference (RFI) inside dense server racks.
Target Applications: Dell Data Centers, HPC InfiniBand, and SAN Fabrics
Combining SFF-8665 MSA compliance, 3-meter optical reach, and pre-programmed Dell firmware, the LINK-PP LQ-AOC11100-3M supports high-density 100G interconnect deployments:
- Dell EMC PowerSwitch to PowerEdge Server Links: Ideal for 3-meter Top-of-Rack (ToR) switch-to-server interconnects linking Dell PowerSwitch S5248F/S5296F to dual-port 100G QSFP28 server NICs.
- Switch-to-Switch Stacking & Interconnects: Deployed in intra-rack switch aggregation links connecting adjacent Dell 100G enterprise switches.
- InfiniBand EDR High-Performance Computing (HPC): Suitable for 100G InfiniBand EDR supercomputing fabrics and low-latency GPU cluster interconnects.
How to Select and Verify a 100G QSFP28 AOC Cable Replacement
When evaluating or sourcing 3-meter 100G QSFP28 Active Optical Cables for new rack deployments or supply chain diversification, hardware engineers should verify the following core parameters:
- OEM System EEPROM Firmware Coding: Confirm that the AOC cable is pre-programmed with Dell EMC firmware signatures to ensure plug-and-play port recognition on Dell OS10 / Force10 operating systems.
- Interconnect Distance & Cable Type (3m AOC vs DAC): Verify whether a 3-meter active optical cable (AOC) is preferred over a 3-meter direct attach copper cable (DAC) to optimize bend radius (7.5mm vs 35mm), cable weight, and rack ventilation.
- Clock & Data Recovery (CDR) Support: Ensure both transmit and receive channels incorporate integrated CDR circuitry to maintain signal integrity over 25.78Gbps NRZ electrical host interfaces.
- Minimum Bend Radius & Cable Routing: Confirm that the 7.5mm minimum bend radius fits within your server rack cable management arms without exceeding fiber strain limits.
- Parametric & MSA Compliance Verification: Validate electrical, optical, and mechanical specifications against SFF-8665, SFF-8636, and IEEE 802.3bm standards.
Frequently Asked Questions
What is LINK-PP LQ-AOC11100-3M?
LINK-PP LQ-AOC11100-3M is a 3-meter (10ft) 100G QSFP28 to QSFP28 Active Optical Cable (AOC) assembly. It features integrated 850nm VCSEL optics, PIN receivers, and CDR circuitry, serving as a 100% compatible drop-in alternative for Dell AOC-QSFP28-100G-3M.
Is LINK-PP LQ-AOC11100-3M 100% compatible with Dell AOC-QSFP28-100G-3M?
Yes. LINK-PP LQ-AOC11100-3M is pre-programmed with Dell EMC firmware signatures, ensuring seamless plug-and-play compatibility, full I2C digital diagnostics (DDM/DOM) monitoring, and zero port-error warnings on Dell PowerSwitch and PowerEdge server platforms.
Why choose a 3m 100G Active Optical Cable (AOC) over a 3m Direct Attach Copper (DAC) cable?
At 3 meters, 100G DAC cables are thick (26AWG/28AWG), heavy, and rigid with a large ~35mm bend radius that can block rack cooling airflow. In contrast, the 3m AOC cable is lightweight, highly flexible with an ultra-tight 7.5mm bend radius, and immune to electromagnetic interference (EMI).
What protocols are supported by LINK-PP LQ-AOC11100-3M?
LINK-PP LQ-AOC11100-3M supports 100GBASE-SR4 Ethernet (100GbE), InfiniBand EDR (100G), 128G Fibre Channel, and OTN OTU4 protocols, making it suitable for both Ethernet data centers and low-latency InfiniBand supercomputing clusters.
What are the key optical and electrical features of LQ-AOC11100-3M?
Key features include 4-channel 850nm VCSEL transmitter array, PIN receiver array, integrated Tx/Rx CDR, 3.3V power supply, commercial operating temperature (0°C to +70°C), 7.5mm bend radius, and BER better than 1E-12.
Are compatible replacement options available for Dell AOC-QSFP28-100G-3M?
Yes, LINK-PP LQ-AOC11100-3M serves as a direct footprint and firmware-compatible replacement for Dell AOC-QSFP28-100G-3M. Engineers should verify cable length, form factor, and system firmware requirements before final secondary-source qualification.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
100G QSFP28 Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify AOC-QSFP28-100G-3M compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
100G QSFP28 Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
SFP Download
Product Drawing
Dell Compatible 100G AOC-QSFP28-100G-3M FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































