HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • HFJ11-S114.jpg
  • HFJ11-S114ERL.jpg
  • HFJ11-S114E.jpg
  • HFJ11-S114ERL Halo.jpg
  • rj45 jack with led.jpg

Halo HFJ11-S114 Compatible LINK-PP LPJ0125CNL 10 Base-T Tab Down Without Led Single Port Shielded RJ-45 Network Socket

P/N:

LPJ0125CNL

Manufacturer:

LINK-PP

Compatible Brand:

Halo

Compatible P/N:

LPJ0125CNL

  • Compatible Brands: Halo
  • Number of Ports: 1X1
  • Speed: 10Base-T
  • PoE: Non-PoE
  • Latch: Down
  • LED Option: No LEDs
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0125CNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Halo
  • Compatible P/N: HFJ11-S114

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number LPJ0125CNL Halo Part Number Equivalent HFJ11-S114
Connector Type RJ45 MagJack (Integrated Magnetics) Part Status Active
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN Ethernet (Non-PoE)
Number of Ports Single Port (1×1) Speed 10BASE-T
Latch Orientation Down (Tab-Down) Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle Side Entry (Through Hole)
Shield EMI Tabs With EMI Tabs LED Option Without LEDs
PCB Material FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.524 / 13.30 Package Length (Inches/mm) 0.837 / 21.25
Package Width (Inches/mm) 0.627 / 15.93 Operating Temperature 0°C to +70°C (Commercial)
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio (RX/TX) 1CT:1CT Configuration (RX/TX) T, C

Single-Port 10BASE-T RJ45 MagJack

The LINK-PP LPJ0125CNL is a single-port 10BASE-T Ethernet RJ45 integrated connector module (MagJack) in a right-angle, side-entry through-hole configuration. Designed with an internal 4-core magnetic structure, 1CT:1CT turns ratio, integrated Bob Smith termination (BST), and AutoMDX support, the connector supports IEEE 802.3-compliant Ethernet signal isolation and common-mode noise suppression across the specified 0°C to +70°C operating temperature range.

The mechanical assembly incorporates a Tab-Down latch orientation, perimeter shield EMI tabs, an unilluminated (LED-free) front face, and molded T-Post retaining pins. With a housing height of 13.30 mm, the LPJ0125CNL provides a standardized physical interface suited for solar inverters, operation generators, residential intercoms, game controllers, and set-top box hardware.

Lifecycle: Active
Ethernet Speed: Single-Port 10BASE-T
Cross Reference: Halo HFJ11-S114
Mounting & Latch: Through Hole (THT) / Tab-Down
Operating Temperature: 0°C to +70°C Commercial
Qualification Support: Sample Evaluation / Second Source

Compatibility and Design Positioning

The LINK-PP LPJ0125CNL is positioned as a cross-reference and alternative sourcing option for the Halo HFJ11-S114 single-port 10BASE-T RJ45 MagJack. The two devices share key characteristics including 8P8C through-hole construction, Tab-Down orientation, 1CT:1CT turns ratio, an unilluminated non-LED configuration, and integrated Ethernet magnetics. Engineering teams should verify pin assignments, footprint dimensions, shield tab geometry, and mechanical tolerances against the applicable official drawings before approving component substitution.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJ0125CNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical isolation parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.

Tab-Down Latch Topology and Enclosure Front-Panel Optimization

Integrating 10BASE-T magnetics into a standardized Tab-Down connector format provides practical packaging and mechanical advantages for embedded systems:

  • Board-Edge Ergonomics: The Tab-Down latch positions the RJ45 plug release latch on the lower edge, preventing mechanical conflict with upper enclosure bezels, display frames, or protruding chassis overhangs during cable disconnection.
  • 13.30 mm Vertical Height: The specified housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
  • 0°C to +70°C Commercial Operating Range: The 0°C to +70°C specification defines the stated operating temperature range of the connector assembly, supporting commercial power equipment, monitoring systems, and consumer electronics.
  • Perimeter Shield EMI Tabs: Exterior spring tabs establish multi-point contact with the equipment front panel, assisting with chassis-level grounding and shielding continuity.
  • Mechanical T-Post Retention: Molded plastic posts help align the connector during assembly and distribute mechanical insertion and extraction stresses directly into the FR4 PCB substrate.

Internal Magnetics Architecture, 1CT:1CT Turns Ratio, and AutoMDX

The LPJ0125CNL incorporates an internal 4-core magnetic architecture supporting 10BASE-T Ethernet signaling. A symmetrical 1CT:1CT turns ratio across transmit and receive stages in a T, C configuration enables broad interface compatibility with standard voltage-mode and current-mode Ethernet PHY transceivers.

The integrated magnetics include Bob Smith termination (BST) to help manage common-mode noise, while AutoMDX support enables automatic transmit/receive pair crossover detection. Electrical isolation is specified according to the applicable LINK-PP product documentation, separating PHY circuitry from line-side transients and cable common-mode noise.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJ0125CNL into host hardware layouts, engineering teams should account for the following structural and electrical parameters:

1. Package Dimensions and Front-Panel Cutout

The connector body measures 13.30 mm (0.524 inches) in height, 21.25 mm (0.837 inches) in length, and 15.93 mm (0.627 inches) in width. Front-panel openings must be designed with appropriate clearances to allow unhindered deflection of the perimeter EMI spring tabs.

2. Tab-Down Latch Headroom

Because the release latch is oriented on the bottom face, designers should provide adequate clearance beneath the connector port to ensure field technicians can easily depress the plug latch during servicing.

3. Through-Hole T-Post Anchoring

Molded T-Posts position the component securely on the PCB. Verification of drill hole diameters and tolerance spacing against the official footprint drawing is essential to ensure proper mechanical seating and solder joint reliability.

4. Unilluminated Non-LED Pinout Routing

Eliminating integrated status LEDs simplifies PCB trace routing near the board edge. With no LED drive pins on the footprint, layout designers benefit from fewer component-layer routing channels, reduced risk of high-frequency digital noise coupling, and simplified PCB stackups.

Design Consideration Comparison: Integrated MagJack vs. Discrete Solution

Design Consideration LPJ0125CNL
Integrated Tab-Down MagJack
Discrete 10BASE-T Magnetics
+ Modular RJ45 Jack
Component Integration Magnetics and RJ45 connector integrated in one housing Separate magnetic transformer and modular RJ45 jack
PCB Assembly Operations Single through-hole placement Multiple placements (SMD transformer + through-hole jack)
Board-Edge Layout Consolidated footprint at board edge Requires trace routing between discrete magnetics and connector
Vertical Height Envelope Fixed 13.30 mm profile Variable based on selected modular jack profile
Front-Panel Shielding Integrated metal shield with perimeter EMI tabs Dependent on chosen external RJ45 shield design
Primary Engineering Focus Compact layout, unified assembly, standard 10BASE-T I/O Custom physical placement flexibility across board zones

Application Considerations for LPJ0125CNL

Target Application Profile Primary Engineering Consideration
Solar Inverters & Energy Monitoring Integrated Bob Smith termination and robust metal shielding assist with EMI suppression near power conversion stages.
Operation Generators & Power Subsystems Provides reliable 10BASE-T data communication and IEEE 802.3 electrical isolation for localized telemetry controllers.
Residential Intercoms & Audio Terminals Tab-Down latch orientation prevents interference with front-panel display bezels and microphones in flush wall units.
Game Controllers & Set-Top Boxes Unilluminated front face provides a clean aesthetic for consumer appliances where external LEDs are not required.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJ0125CNL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify 8P8C signal pin layout, T-Post drill sizes, and shield pin locations against the official LINK-PP LPJ0125CNL drawing.
  • Tab-Down Headroom Clearance: Confirm that the enclosure cutout provides sufficient clearance beneath the port for cable plug latch engagement and release.
  • Unilluminated PCB Layout: Confirm that the schematic symbol and PCB footprint reflect an LED-free 8P8C configuration, eliminating unused LED routing.
  • Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance chassis ground plane to support front-panel EMI tab performance.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0°C to +70°C commercial temperature range.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJ0125CNL?

The LPJ0125CNL is a single-port 10BASE-T Ethernet RJ45 MagJack. It features an 8P8C contact configuration, 4-core internal magnetics, 1CT:1CT turns ratio, Tab-Down latch orientation, side-entry through-hole mounting, unilluminated non-LED design, integrated BST circuit, AutoMDX support, and an operating temperature range of 0°C to +70°C.

Is the LINK-PP LPJ0125CNL compatible with the Halo HFJ11-S114?

The LPJ0125CNL is positioned as a cross-reference and alternative sourcing option for the Halo HFJ11-S114. Both devices share matching 8P8C pinouts, 1CT:1CT turns ratios, Tab-Down latch profiles, unilluminated front faces, and through-hole PCB footprints. Engineering teams should cross-reference official product drawings before volume changeovers.

What are the engineering benefits of an unilluminated (LED-free) RJ45 MagJack?

An unilluminated MagJack eliminates LED drive pins from the PCB footprint, freeing up space near the board edge. This simplifies trace routing, reduces component count on host drive circuitry, and prevents digital switching noise on LED lines from coupling into sensitive differential Ethernet pairs.

How does the Tab-Down latch orientation benefit front-panel design?

A Tab-Down latch positions the RJ45 plug release latch on the underside of the connector. This orientation avoids mechanical interference with upper enclosure bezels, display frames, or protruding chassis lips, making it easier for technicians to disconnect network cables in compact equipment.

What is the function of the internal 4-core magnetics and BST circuit?

The 4-core magnetics provide signal coupling and electrical isolation for the 10BASE-T transmit and receive channels. The integrated Bob Smith termination (BST) network helps manage common-mode energy and provides high-voltage capacitive decoupling to support electromagnetic compatibility.

Is the LPJ0125CNL suitable for Power over Ethernet (PoE) applications?

No. The LPJ0125CNL is specified as a Non-PoE connector for data-only 10BASE-T interfaces. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required PoE standard and DC current conditions should be selected.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.