HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 1、MIC24210-0104T-LF3(1708740311290).jpg
  • JKM-0011NL(1708740311066).jpg
  • J00005NL Pulse(1708740311155).jpg
  • MIC24210-0104T-LF3 WE(1708740311146).jpg
  • cat 5 rj45 jack(1708740311101).jpg

Pulse J0011D01NL Compatible LINK-PP LPJ0011DNL 10/100 Base-T magnetic RJ45 Modular Jack Tab Down Without Led

P/N:

LPJ0011DNL

Manufacturer:

LINK-PP

Compatible Brand:

Pulse

Compatible P/N:

LPJ0011DNL

  • Compatible Brands: Pulse
  • Number of Ports: 1X1
  • Speed: 100Base-TX
  • PoE: Non-PoE
  • Latch: Down
  • Mounting Type: THT
  • LED Option: No LEDs
  • Shield EMI Tabs: NO
  • Temperature: 0℃ to 70℃
  • P/N: LPJ0011DNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Pulse
  • Compatible P/N: J0011D01NL

Packaging Details:

N.W/pCS:

0.007kg

Package:

Tray

SPQ:

50pcs

Qty/carton:

1200pcs

Carton size:

32*30*31cm

G.W/carton:

8.5kg

Product Specifications

LINK-PP Part Number: LPJ0011DNL Pulse Part Number J0011D01NL
Part Status Active Connector Type Jack
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan Ethernet(NoN PoE)
Number of Ports 1x1 Port Speed 10/100 Base-T
Latch Down Cores per Port 4
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs Without LED Option Without
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.528/13.40 Package Length (Inches/mm) 0.839/21.30
Package Width (Inches/mm) 0.626/15.90 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

LINK-PP LPJ0011DNL Technical & Compatibility Overview

The LINK-PP LPJ0011DNL is a single-port (1x1) Tab-Down non-LED RJ45 Integrated Connector Module (ICM) with built-in 10/100BASE-TX Ethernet magnetics. Designed as a functional and footprint-compatible alternative to the Pulse Electronics J0011D01NL, it integrates a 4-core magnetic assembly (1CT:1CT turns ratio) and a Bob Smith Termination (BST) circuit within a smooth, tabless metal shield.

  • Footprint & Schematic Alignment: Designed for footprint and pinout compatibility with Pulse J0011D01NL, supporting direct board-level evaluation and secondary sourcing.
  • Integrated Magnetics Architecture: Combines signal transformers and common-mode chokes inside the RJ45 housing to provide required signal coupling and isolation per IEEE 802.3.
  • Tabless Smooth Shielding: Features a smooth metal shield profile without external EMI spring tabs, preventing mechanical interference during front-panel cutout insertion.
  • THT Side-Entry Assembly: Right-angle through-hole mounting with T-Post retaining pegs for mechanical strain relief during cable plugging cycles.

Key Design Benefits

  • Component Density Reduction: Consolidates isolation transformers, chokes, resistors, and capacitors into the RJ45 housing, reducing discrete SMT component count and saving PCB real estate.
  • Unobstructed Panel Insertion: The smooth, tabless shield profile is optimized for tight enclosure bezels where external spring tabs might snag or increase insertion force.
  • Non-LED Faceplate: Ideal for enclosed systems, internal network diagnostic ports, or vision devices where status LEDs are not required or could cause stray light leakage.
  • Integrated Bob Smith Termination: Provides a defined common-mode termination path for the cable-side interface to help control common-mode EMI noise.
  • Second-Source Supply Continuity: Offers hardware engineering and procurement teams a pin-compatible alternative to mitigate component lead times and supply chain single-point risks.

Integrated Magnetics & Electrical Architecture

The LPJ0011DNL integrates 10/100BASE-TX magnetics directly behind the 8p8c contact pins, reducing the need for long differential trace runs to discrete magnetics on the motherboard.

4-Core Magnetic Assembly

The integrated magnetic assembly provides the transformer and common-mode filtering functions required for 10/100BASE-TX Ethernet connectivity. With a 1CT:1CT turns ratio across transmit and receive lines, it provides galvanic isolation between the network cabling and the host Ethernet PHY transceiver.

Bob Smith Termination (BST) Circuitry

An integrated Bob Smith Termination network connects the center taps of the isolation transformers to ground through high-voltage capacitors and precision 75-ohm resistors. This provides a defined common-mode termination path for the cable-side interface, helping control common-mode noise and EMI performance.

Mechanical Specifications & PCB Layout

The LPJ0011DNL features standard package dimensions of 13.40mm (H) x 15.90mm (W) x 21.30mm (L). The right-angle side-entry profile aligns with standard board-edge connector layouts. Mechanical stability on FR4 substrates is reinforced by solderable T-Post PCB pegs, which absorb mechanical stress when Ethernet cables are attached.

Target Applications

  • Digital Cameras & Vision Systems: Non-LED housing prevents stray light leakage inside optical enclosures or diagnostic camera housings.
  • Game Controllers & Embedded Peripherals: Right-angle through-hole mounting provides mechanical durability against cable strain in interactive controllers.
  • Solar Inverters & Communication Gateways: Compact side-entry ICM footprint simplifies board layout on embedded solar monitoring and communication cards.

Pulse J0011D01NL Replacement Compatibility Checklist

When evaluating the LINK-PP LPJ0011DNL as an alternative to Pulse Electronics J0011D01NL, hardware engineers should verify the following parameters against their system specification:

  • Schematic & Magnetics Alignment: Confirm that your Ethernet PHY reference design utilizes a 1CT:1CT turns ratio and 4-core 10/100BASE-TX magnetic topology.
  • PCB Footprint & Peg Layout: Verify that the standard 8p8c THT pin grid and T-Post peg locations match your PCB land pattern.
  • Panel Clearance & Shielding: Ensure the 13.40mm height and smooth, tabless shield profile fit your enclosure panel cutout without requiring spring-tab chassis contact.
  • Temperature Class Verification: Confirm that the 0°C to +70°C operating temperature range satisfies your product's operating environment requirements.

Frequently Asked Questions

Is LINK-PP LPJ0011DNL compatible with Pulse J0011D01NL?

Yes. The LPJ0011DNL is designed as a functional and footprint-compatible alternative to Pulse J0011D01NL, designed to match the specified 8p8c THT pin layout, 1CT:1CT magnetics configuration, and package dimensions of the OEM part. We recommend requesting First Article Inspection (FAI) sample units to verify footprint fitment in your PCB layout prior to mass production.

What should engineers verify before replacing Pulse J0011D01NL?

Engineers should review four key areas: 1) Electrical schematic and 1CT:1CT turns ratio; 2) 8p8c THT pin arrangement and T-Post peg dimensions; 3) Front-panel bezel clearance for the tabless smooth shield; and 4) System operating temperature requirements (0°C to +70°C).

What engineering documentation is available for design-in verification?

LINK-PP provides complete engineering documentation, including 2D dimensional mechanical drawings, 3D STEP models, electrical schematics, and product datasheets for CAD design-in and evaluation.

How can engineering or procurement teams request evaluation samples?

Engineering and sourcing teams can request evaluation samples and First Article Inspection (FAI) units by contacting our technical sales team or submitting a request through our product page portal.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.