HR901105A Compatible LINK-PP LPJ0011DNL 10/100 Base-T MagJack RJ45 Tab Down Without Led
P/N:
LPJ0011DNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJ0011DNL
- Number of Ports: 1X1
- Speed: 100Base-TX
- PoE: Non-PoE
- Latch: Down
- LED Option: No LEDs
- Shield EMI Tabs: NO
- Temperature: 0℃ to 70℃
- P/N: LPJ0011DNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: HR901105A
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1200pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number: | LPJ0011DNL | Part Number | HR901105A |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | Ethernet(NoN PoE) |
| Number of Ports | 1x1 Port | Speed | 10/100 Base-T |
| Latch | Down | Cores per Port | 4 |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | Without | LED Option | Without |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.528/13.40 | Package Length (Inches/mm) | 0.839/21.30 |
| Package Width (Inches/mm) | 0.626/15.90 | Temperature | 0℃ TO 70℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
HanRun HR901105A Compatible LINK-PP LPJ0011DNL Fast Ethernet RJ45 Magjack Technical Overview
The LINK-PP LPJ0011DNL (engineered as a direct 100% pin-to-pin drop-in replacement for HanRun Electronics HR901105A) is a single-port (1x1) Tab-Down non-LED female RJ45 Integrated Connector Module (ICM) with built-in 10/100 Base-T Fast Ethernet magnetics, a smooth metal shield (without EMI tabs), and a Bob Smith Termination (BST) circuit. Compliant with IEEE 802.3u standards, it integrates a 4-core transformer/choke matrix (1CT:1CT turns ratio), delivering 10/100 Mbps Fast Ethernet signal isolation, 1500Vrms Hi-Pot protection, and ESD protection for digital cameras, game controllers, solar inverters, and embedded mainboards.
- Fast Ethernet Magnetics Architecture: 8p8c RJ45 connector integrated with a 4-core magnetic matrix (1CT:1CT turns ratio) supporting 10/100BASE-TX communication over Cat5e/Cat6 wiring.
- Non-LED & Smooth Shield Geometry: Streamlined non-LED faceplate design with a smooth metal shield (without external EMI tabs) for clean bezel cutouts and low insertion force.
- Side-Entry THT Mounting: 90-degree right-angle through-hole mounting with a Tab-Down mechanical latch and T-Post PCB retaining pegs for mechanical strain relief on FR4 boards.
- Direct Cross-Reference Replacement: Fully qualified footprint and electrical drop-in replacement for HanRun Electronics HR901105A for BOM cost optimization and secondary sourcing.
LINK-PP LPJ0011DNL Fast Ethernet Female RJ45 Magjack Connector Overview
LINK-PP LPJ0011DNL is a right-angle side-entry 1x1 Tab-Down non-LED female RJ45 integrated connector module (ICM) designed for non-PoE Fast Ethernet networking platforms. Housing signal transformers, common-mode chokes, and Bob Smith Termination directly inside a smooth metal-shielded jack without LEDs, this connector simplifies motherboard layout by replacing discrete PHY magnetics. It provides a highly reliable, pin-compatible secondary-source alternative to HanRun HR901105A in industrial machine vision cameras, interactive game controllers, solar power inverter gateways, and embedded single-board computers.
Key Benefits of LINK-PP LPJ0011DNL / HanRun HR901105A Compatible Magjack
- Fully Integrated Magjack Architecture (ICM): Consolidates discrete isolation transformers, common-mode chokes, resistors, and capacitors inside the RJ45 jack, reducing motherboard component count and SMT placement cycles.
- Streamlined Non-LED Housing Eliminates Optical Light Leakage: Non-LED faceplate design is ideal for sealed enclosures, camera housings, or internal diagnostic mainboards where status LEDs are unnecessary.
- Smooth Metal Shield (Without EMI Tabs) for Flush Fitment: Engineered without external EMI spring tabs, enabling clean, flush insertion into front-panel bezel cutouts with low insertion force.
- IEEE 802.3u 10/100BASE-TX Fast Ethernet Speed: Embeds a 4-core transformer and common-mode choke matrix that isolates and filters transmit/receive lines, ensuring clean Fast Ethernet eye diagrams with minimal differential insertion loss.
- Integrated Bob Smith Termination (BST) & Auto-MDIX: Built-in 75-ohm BST circuit routes common-mode EMI noise and ESD transients safely to ground, while Auto-MDIX logic supports automatic straight-through or crossover cable detection.
- Direct Second Sourcing for HanRun Electronics HR901105A: Identical 8p8c through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.
Integrated Magnetics & 10/100BASE-TX Signal Architecture
The LINK-PP LPJ0011DNL utilizes an advanced Integrated Connector Module (ICM) architecture that embeds 10/100 Base-T magnetics directly behind the 8p8c contact pins, eliminating high-frequency noise radiation caused by long trace runs on the motherboard.
4-Core Fast Ethernet Transformer & Choke Configuration
Featuring a 1CT:1CT transmit and receive turns ratio with 4 magnetic cores per port, the LPJ0011DNL establishes 1500Vrms galvanic isolation between the Ethernet PHY transceiver chip and the external network cable. The 4-core layout provides precise impedance matching across transmit and receive differential pairs, suppressing inter-channel crosstalk and common-mode noise.
Bob Smith Termination (BST) & ESD Rejection
The integrated Bob Smith Termination (BST) network utilizes high-voltage capacitors and precision resistors to balance line impedance on unused cable pairs. This prevents common-mode noise reflection, reduces radiated EMI emissions, and enhances system ESD immunity during cable plugging.
PCB Mounting & Mechanical Specifications
Designed for automated Through-Hole Technology (THT) assembly, the LPJ0011DNL incorporates robust mechanical features to ensure structural integrity on FR4 substrates.
Tab-Down Latch Geometry & Smooth Shield Profile
With package dimensions of 13.40mm H x 21.30mm L x 15.90mm W, the LPJ0011DNL provides a compact 1U-compatible footprint. The non-LED faceplate aligns cleanly with front-panel cutouts, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Digital Cameras, Game Controllers, and Solar Inverters
Combining IEEE 802.3u Fast Ethernet speed, BST noise suppression, non-LED profile, and smooth metal shield geometry, the LINK-PP LPJ0011DNL supports diverse embedded systems:
- Industrial Machine Vision & Digital Cameras: Ideal for industrial vision cameras, smart inspection sensors, and handheld diagnostic terminals.
- Interactive Game Controllers & Arcade Consoles: Deployed in commercial gaming consoles, arcade controllers, and interactive gaming peripherals.
- Solar Inverters & Photovoltaic (PV) Gateways: Suitable for solar power inverter communications boards, solar data loggers, and PV grid monitoring gateways.
How to Select and Verify LPJ0011DNL vs. HanRun HR901105A
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJ0011DNL as a second-source replacement for HanRun Electronics HR901105A should verify the following core parameters:
- 4-Core Magnetics Compatibility: Confirm that a 4-core magnetic matrix and a 1CT:1CT turns ratio match your Fast Ethernet PHY transceiver reference design.
- Non-LED Configuration Check: Verify that your system enclosure design does not rely on integrated LEDs inside the RJ45 jack housing.
- Mechanical Latch & Footprint Alignment: Verify that the Tab-Down latch direction, 8p8c through-hole pin arrangement, and T-Post peg locations match the HR901105A PCB land pattern.
- Package Height Clearance: Ensure that the 13.40mm package height fits within your front-panel bezel window.
Frequently Asked Questions
Is LINK-PP LPJ0011DNL a direct drop-in replacement for HanRun HR901105A, and what are the BOM cost advantages?
Yes. LINK-PP LPJ0011DNL is engineered as a 100% mechanical, electrical, and footprint drop-in replacement for HanRun Electronics HR901105A. Sourcing managers can achieve 30% to 50% BOM cost savings with standard production lead times of 2 to 3 weeks. Contact our sales team for instant cross-reference checking, 3D STEP models, and tiered volume pricing.
What key mechanical and electrical parameters must design engineers verify before dropping in this Fast Ethernet connector?
Design engineers should verify four core parameters: 1) 8p8c through-hole THT layout with 13.40mm package height and T-Post peg alignment; 2) 4-core 10/100BASE-TX magnetics matrix with 1CT:1CT turns ratio; 3) Non-LED housing profile; and 4) Smooth shield profile (without external EMI tabs) fitment with front-panel bezel cutouts. Complete 3D STEP models and Cadence/Altium PCB footprints (.PcbLib) are available for CAD design-in verification.
What quality certifications, factory testing, and contact plating standards apply to LPJ0011DNL?
LINK-PP LPJ0011DNL is manufactured in ISO9001 and ISO14001 certified facilities and complies with UL, RoHS, and REACH standards. Every connector undergoes 100% automated electrical testing, including 1500Vrms Hi-Pot dielectric isolation and turns ratio testing prior to shipment. Contact mating area plating is available in Gold 6u", 15u", or 30u" options to ensure corrosion resistance across 750+ insertion cycles.
How does LPJ0011DNL ensure signal integrity and EMI protection in commercial operating environments?
Rated for an operating temperature range of 0°C to +70°C, the LPJ0011DNL embeds a 4-core transformer and choke matrix that isolates transmit/receive lines up to 100 MHz. The built-in 75-ohm Bob Smith Termination (BST) circuit and smooth metal shield provide a low-impedance ground return path to suppress radiated emissions and protect host Ethernet PHY chips against ESD transients.
How can procurement and engineering teams request free samples and technical drawings for LPJ0011DNL?
LINK-PP offers free sample kits for qualified engineering and procurement teams for prototype testing and First Article Inspection (FAI). We maintain ready-to-ship buffer stock for common parts and offer flexible MOQs for trial production runs. Click "Request Free Sample" or contact our technical sales team today to receive official mechanical drawings, test reports, and price quotations within 24 hours.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































