Juniper Compatible 10G SFP+ BiDi (1270nm-TX/1330nm-RX,20km,LC SMF,DOM,Industrial,Compatible With EX-SFP-10GE-BX23-20-I)
P/N:
LS-BL273310-20I
Manufacturer:
LINK-PP
Compatible Brand:
Juniper
Compatible P/N:
EX-SFP-10GE-BX23-20-I
- Compatible Brands: Juniper
- Form Factor: SFP+
- Data Rate: 10G
- Distance: ≤20km
- Type: Single Mode
- Connector: Simplex LC
- Model: LR
- Wavelength: 1270nm-TX/1330nm-RX
- P/N: LS-BL273310-20I
- Manufacture: LINK-PP
- Compatible Brand: Juniper
- Compatible P/N: EX-SFP-10GE-BX23-20-I
Before You Deploy: 10G BiDi Safety & Pairing Checklist
Deploying BiDi (Bidirectional) optics instantly doubles your fiber capacity, but requires strict architectural discipline. Before deploying, verify the following:
- Mandatory Asymmetrical Pairing: This module transmits at 1270nm and receives at 1330nm. It will not link if connected to another identical module. It MUST be paired with its counterpart (Tx:1330nm / Rx:1270nm) at the remote site.
- Simplex LC Cabling: BiDi optics use a single LC port. Ensure your patch panels are equipped with Simplex LC/UPC patch cords. Standard duplex cables are mechanically incompatible.
- Lab Testing Safety: With a robust PIN Receiver Overload threshold of +0.5 dBm, this module is highly resistant to saturation. It is safe to test back-to-back on a lab bench using a short patch cord without immediate risk of hardware damage.
Comprehensive Technical Specifications
Manufactured with a high-stability DFB laser and backed by a comprehensive 5-Year replacement warranty.
SFP+ 20km Application
● 10G Ethernet
● 10G Fibre Channel
● 10G CPRI
● 10Gbps Optical systems
● 10GBASE-LR at 10.3125Gbps
● 10GBASE-LW at 9.953Gbps
● LTE systems
● Other Optical links
| LINK-PP Part Number | LS-BL273310-20I | Juniper Compatible | EX-SFP-10GE-BX23-20-I |
| Form Factor | SFP+ | Max Data Rate | 10.7Gbps |
| Wavelength | 1270nm-TX/1330nm-RX | Max Cable Distance | 20km |
| Connector | Simplex LC | Media | SMF |
| Transmitter Type | DFB | Receiver Type | PIN |
| TX Power | -6.5 to +2dBm | RX Power | -17 to +1dBm |
| Receiver Sensitivity | -14.4dBm | Receiver Overload | 0.5dBm |
| Industrial Temperature Range | -40 to 85°C | Protocols | SFP+ MSA Compliant, CPRI, eCPRI |
| DDM/DOM | Supported | Warranty | 5 Years |
Optical Power & Link Budget Analysis
Evaluate these optical thresholds against your OTDR trace reports to ensure zero bit-error-rate (BER) over your 20km links.
| Parameter | Specification Limit | Diagnostic Note |
|---|---|---|
| Transmit Power (Tx) | -6.5 dBm to +2.0 dBm | Stable DFB laser output optimized for low-dispersion 1270nm windows. |
| Receiver Sensitivity (Rx) | -14.4 dBm | Values dropping below -14.4 dBm indicate dirty splices or excessive distance. |
| Receiver Overload | +0.5 dBm | Highly resilient PIN receiver; optical attenuators are generally not required. |
| Optical Link Budget | 7.9 dB | (Calculated from minimum Tx of -6.5dBm and Rx sensitivity of -14.4dBm). |
Procurement Strategy: Why Choose 10G BiDi over 10GBASE-LR?
Slashing Dark Fiber Costs by 50%: Standard 10GBASE-LR (10km) optics require two strands of fiber (one for Tx, one for Rx). By utilizing WDM (Wavelength-Division Multiplexing), this BiDi module transmits 10.7Gbps CPRI or Ethernet traffic over a single strand. For ISPs leasing municipal dark fiber or telecom operators wiring outdoor 5G cellular towers, deploying BiDi optics immediately doubles the capacity of the existing physical fiber plant, dramatically reducing ongoing CAPEX and OPEX.
Engineering Validation: Native Recognition in Juniper Junos OS
Unlike third-party optics that trigger Syslog errors or require hidden unlock commands, the LINK-PP LS-BL273310-20I features a bit-matched EEPROM signature. It is natively recognized by the Junos OS on EX, QFX, and MX series platforms.
1. Verify Hardware Recognition:
user@juniper> show chassis hardware
Hardware inventory:
Item Version Part number Serial number Description
Chassis JM021948123 EX4300-48P
...
Xcvr 0 REV 01 740-053075 LPP27331020I SFP+-10G-BX20-U
2. Poll Real-time DOM (Digital Optical Monitoring):
user@juniper> show interfaces diagnostics optics xe-0/0/0
Physical interface: xe-0/0/0
Laser bias current : 35.200 mA
Laser output power : 0.8100 mW / -0.92 dBm
Module temperature : 42.50 degrees C
Module voltage : 3.3100 V
Receiver signal average optical power : 0.1510 mW / -8.21 dBm
Diagnostic Baseline: In the Junos OS output above, the Receiver signal average optical power is -8.21 dBm. Since this module has a defined Receiver Sensitivity limit of -14.4 dBm, this provides a highly secure 6.19 dB operating margin. As long as your Rx power stays above -14.4 dBm, the 10Gbps Layer-1 link will remain perfectly stable.
Frequently Asked Questions
What module must I pair with the EX-SFP-10GE-BX23-20-I?
This is a WDM BiDi module that transmits at 1270nm and receives at 1330nm. It must be paired with the complementary BiDi module, typically the BX32 variant, which transmits at 1330nm and receives at 1270nm over the same single fiber.
Do I need to bypass vendor locks in Juniper Junos OS?
No. The LINK-PP LS-BL273310-20I EEPROM is programmed to match the original Juniper module identification, allowing Junos OS to recognize it as a compatible 10GBASE-BX transceiver without requiring third-party transceiver overrides.
Why is this module rated for 10.7Gbps instead of just 10G?
The 10.7Gbps data rate supports applications beyond standard 10 Gigabit Ethernet, including CPRI, eCPRI, and OTU2 transport protocols commonly used in 5G mobile fronthaul and optical transport networks.
Is it safe to test this module back-to-back in a lab?
Yes. The module's PIN receiver has a receiver overload specification of +0.5dBm, making it more tolerant of short-distance testing than many long-reach optics. However, using a 3dB optical attenuator is still recommended as a best practice during extended bench testing.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
10G SFP+ Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify EX-SFP-10GE-BX23-20-I compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
10G SFP+ Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
SFP Download
Product Drawing
Juniper Compatible 10G EX-SFP-10GE-BX23-20-I FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































