LF-BL32TG-10Dx 10Gbps SFP+ Tx1330nm/Rx1270nm BiDi 10Km Transceiver
P/N:
LF-BL32TG-10Dx
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LF-BL32TG-10Dx
- Compatible Brands: LINK-PP
- Form Factor: SFP+
- Data Rate: 10G
- Distance: ≤10km
- Type: Single Mode
- Connector: Simplex LC
- Model: SR
- P/N: LF-BL32TG-10Dx
- Manufacture: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LF-BL32TG-10Dx
Product Specifications
| LINK-PP Part Number | LF-BL32TG-10Dx | Vendor Name | LINK-PP |
| Form Factor | SFP+ | Max Data Rate | 10.3Gbps |
| Wavelength | TX1330nm/RX1270nm | Max Cable Distance | 10km |
| Connector | Simplex LC | Media | SMF |
| Transmitter Type | DFB | Receiver Type | PIN |
| TX Power | -6.5 to +2dBm | RX Power | -17 to +1dBm |
| Receiver Sensitivity | -14.4dBm | Receiver Overload | 0.5dBm |
| Operating case temperature | Commercial 0 to 70°C Industrial -40~85℃ |
Protocols | SFP+ MSA Compliant, CPRI, eCPRI |
LINK-PP LF-BL32TG-10Dx Technical Overview
The LINK-PP LF-BL32TG-10Dx is a hot-pluggable 10.3Gbps SFP+ BiDi (Bidirectional) single-fiber optical transceiver module designed for 10G Ethernet, CPRI, and eCPRI optical links. Operating over a single strand of single-mode fiber (SMF) via a Simplex LC/UPC connector, it transmits at 1330nm using a DFB laser and receives at 1270nm via a PIN photodiode receiver for transmission distances up to 10km. Featuring full Digital Optical Monitoring (DOM/DDM) support per SFF-8472 and SFF-8431 specifications, it is available in commercial (0°C to 70°C) and industrial (-40°C to +85°C) operating temperature options for 5G wireless fronthaul and fiber-constrained network infrastructure.
- Single-Fiber BiDi Efficiency (TX1330nm / RX1270nm): Doubles fiber capacity by transmitting and receiving 10.3 Gbps traffic over a single strand of single-mode fiber.
- 10.3 Gbps Multi-Protocol Bandwidth: Supports 10GBASE-BX Ethernet, wireless 5G eCPRI, and 4G CPRI fronthaul protocols over 10km SMF link distances.
- Digital Optical Monitoring (DOM/DDM): Real-time monitoring of TX/RX optical power, laser bias current, module temperature, and supply voltage per SFF-8472.
- Commercial & Industrial Temperature Classes: Available in 0°C to 70°C commercial and -40°C to +85°C industrial operating temperature ratings for outdoor RRU/BBU deployments.
Key Design Benefits
- Fiber Infrastructure Cost Savings: Single-fiber bidirectional transmission reduces required SMF cabling infrastructure by 50% compared to traditional dual-fiber duplex links.
- Real-Time DOM Diagnostics: Internal digital diagnostics interface (DOM) allows network administrators to monitor live transmit/receive optical power levels and thermal parameters.
- 5G Wireless Fronthaul Capability: CPRI and eCPRI protocol support enables direct integration into 4G/5G Remote Radio Units (RRU) and Baseband Units (BBU).
- Hot-Pluggable SFP+ Form Factor: Enables module insertion and replacement in active switch or base station line cards without interrupting system power.
- Multi-Vendor Switch Interoperability: Engineered to comply with SFP+ MSA standards for broad compatibility across commercial network switches, routers, and telecom equipment.
Optical Architecture & Diagnostic Performance
The LF-BL32TG-10Dx incorporates electro-optical subsystems directly within a compact metallic SFP+ enclosure to ensure signal integrity across high-speed optical channels.
Transmitter & Receiver Subsystems
The transmitter incorporates an uncooled 1330nm DFB laser supplying -6.5 to +2.0 dBm optical output power. The receiver incorporates a 1270nm WDM filtered PIN photodiode with an integrated trans-impedance preamplifier (TIA) providing -14.4 dBm receiver sensitivity and a 0.5 dBm overload threshold across 10.3 Gbps data streams.
Complementary BiDi Pairing
Designed to pair across a single fiber strand with a complementary 10G BiDi transceiver operating at TX 1270nm / RX 1330nm to complete the bidirectional optical communication link.
Digital Diagnostic Monitoring (DOM)
An SFF-8472 compliant MCU control unit monitors real-time operational parameters over a 2-wire serial interface. Monitored metrics include transmitted optical power, received optical power, laser bias current, module operating temperature, and internal supply voltage.
Mechanical & Interface Specifications
The LF-BL32TG-10Dx is enclosed in a standard metal SFP+ housing featuring a latching bail mechanism for secure insertion and removal. The optical interface uses an industry-standard Simplex LC/UPC receptacle compatible with single-mode fiber (SMF G.652) patch cables. The module is available in commercial (0°C to 70°C) and extended industrial (-40°C to +85°C) temperature classes, satisfying Class 1 laser safety requirements.
Target Applications
- 5G eCPRI & 4G CPRI Wireless Fronthaul: High-speed optical interconnection between Remote Radio Units (RRU) and Baseband Units (BBU) in cellular base stations.
- 10GBASE-BX Single-Fiber Ethernet Links: Single-mode fiber 10 Gbps Ethernet connectivity for fiber-constrained campus networks and enterprise uplinks.
- Metropolitan & FTTx Optical Transport: Single-fiber bidirectional 10G optical links for telecom access networks and metro aggregation switches.
LINK-PP LF-BL32TG-10Dx Design Verification Checklist
When evaluating the LINK-PP LF-BL32TG-10Dx for optical network expansion or secondary sourcing qualification, network engineers should verify the following parameters against their system specification:
- BiDi Wavelength Pair Matching: Confirm that the opposite end of the single fiber link utilizes a complementary TX 1270nm / RX 1330nm BiDi transceiver.
- Fiber Connector Interface: Confirm Simplex LC/UPC single-mode fiber (SMF G.652) patch cord infrastructure up to 10km link distance.
- Temperature Class Selection: Confirm whether your deployment environment requires the commercial (0°C to 70°C) or industrial (-40°C to +85°C) temperature variant.
- Switch & Protocol Compatibility: Confirm that target switch, router, or baseband unit ports support 10G SFP+ BiDi modules and eCPRI/CPRI protocols.
Frequently Asked Questions
What are the primary optical specifications of the LINK-PP LF-BL32TG-10Dx BiDi transceiver?
The LF-BL32TG-10Dx is a 10.3Gbps SFP+ BiDi optical transceiver transmitting at 1330nm and receiving at 1270nm over a single strand of single-mode fiber (SMF) up to 10km via a Simplex LC connector, featuring DFB/PIN components, DOM support, and CPRI/eCPRI protocol compatibility.
What complementary transceiver module must be paired with the LF-BL32TG-10Dx on the opposite end of the fiber?
Because the LF-BL32TG-10Dx transmits at 1330nm and receives at 1270nm, the far-end of the single-mode fiber link must use a complementary 10G BiDi transceiver operating at TX 1270nm and RX 1330nm.
What engineering and compliance documentation is available for LF-BL32TG-10Dx design-in?
LINK-PP provides complete technical documentation, including product datasheets, EEPROM coding compatibility tables, mechanical 2D/3D drawings, RoHS compliance certificates, and Class 1 laser safety documentation.
How can procurement and engineering teams request samples or a quotation for LINK-PP LF-BL32TG-10Dx?
Procurement and engineering teams can contact LINK-PP to request LF-BL32TG-10Dx evaluation samples for optical, electrical, and switch compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
10G SFP+ Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify LF-BL32TG-10Dx compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
10G SFP+ Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
SFP Download
Product Drawing
LINK-PP Compatible 10G LF-BL32TG-10Dx FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































