HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 1(1716432152965).webp
  • 2(1716432152951).webp
  • 5(1716432152911).webp
  • 4(1716432152909).webp
  • 3(1716432152907).webp

Halo HFJT1-2GHPRL Compatible LPJT95282-8CNL 2.5G Base-T RJ45 High Speed Modular Jack PoE+ Single Port Tab Up Without Led

P/N:

LPJT95282-8CNL

Manufacturer:

LINK-PP

Compatible Brand:

Halo

Compatible P/N:

LPJT95282-8CNL

  • Compatible Brands: Halo
  • Number of Ports: 1X1
  • Speed: 2.5GBase-T
  • PoE: PoE+
  • Latch: Up
  • Mounting Type: THT
  • LED Option: No LEDs
  • Shield EMI Tabs: YES
  • Temperature: 0℃ to 70℃
  • P/N: LPJT95282-8CNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Halo
  • Compatible P/N: HFJT1-2GHPRL

Packaging Details:

N.W/pCS:

0.011kg

Package:

Tray

SPQ:

60pcs

Qty/carton:

840pcs

Carton size:

37*30*30cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number LPJT95282-8CNL Halo Part Number HFJT1-2GHPRL
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 16p8c (RJ45, Ethernet) Application-Lan Ethernet(PoE+)
Number of Ports 1x1 Port Speed 2.5G Base-T
Latch Up Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs With LED Option Without
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.531/13.50 Package Length (Inches/mm) 1.280/32.50
Package Width (Inches/mm) 0.650/16.50 Temperature 0℃ TO 70℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

Single-Port 2.5GBASE-T PoE+ RJ45 MagJack

The LINK-PP LPJT95282-8CNL is a single-port 2.5G Base-T multi-gigabit Ethernet RJ45 MagJack engineered with Power over Ethernet Plus (PoE+, IEEE 802.3at) capability in a right-angle, side-entry through-hole configuration. The Ethernet interface incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The connector also includes Bob Smith termination (BST), AutoMDX support, an unilluminated (LED-free) front face, and a specified operating temperature range of 0℃ TO 70℃.

The mechanical package features a housing height of 13.50 mm (0.531 inches), a length of 32.50 mm (1.280 inches), and a width of 16.50 mm (0.650 inches). Designed with a 16P8C through-hole PCB termination footprint, Tab-Up latch orientation, perimeter shield EMI tabs, and molded T-Posts for PCB retention, the LPJT95282-8CNL provides a consolidated board-level interface for surgical equipment, patient care monitoring hubs, medical imaging devices, and high-speed communications equipment.

Lifecycle: Active
Ethernet Speed: Single-Port 2.5G Base-T
PoE Capability: Ethernet(PoE+) / IEEE 802.3at
Cross Reference: Halo HFJT1-2GHPRL
Mounting & Latch: Through Hole (THT) / Tab-Up
Sourcing Position: Cross-Reference / Second-Source Evaluation

Compatibility and Design Positioning

The LINK-PP LPJT95282-8CNL is positioned as a cross-reference and alternative sourcing option for the Halo HFJT1-2GHPRL single-port 2.5G Base-T PoE+ RJ45 MagJack. It provides a comparable 1×1 port architecture, 2.5GBASE-T interface, IEEE 802.3at PoE+ power handling, 1CT:1CT turns ratio, 8-core-per-port configuration, Tab-Up latch orientation, unilluminated non-LED front face, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.

Procurement and OEM Qualification

For sourcing teams and OEM engineering programs evaluating the LPJT95282-8CNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, electrical characteristics, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.

Tab-Up Latch Topology and Enclosure Front-Panel Optimization

Integrating 2.5G Base-T magnetics and PoE+ power delivery into a Tab-Up RJ45 connector assembly provides practical packaging and mechanical layout considerations for embedded hardware:

  • Tab-Up Latch Orientation: The RJ45 plug release latch is positioned on the upper side of the port. Board and enclosure designers should provide sufficient clearance above the connector for plug insertion, latch engagement, and cable removal.
  • 13.50 mm Vertical Height: The 13.50 mm (0.531 inches) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
  • 0°C to +70°C Operating Range: The 0°C to +70°C specification defines the stated operating temperature range of the connector assembly. Final system qualification should consider the expected internal equipment temperature together with the PHY, PCB, enclosure, and airflow conditions.
  • Unilluminated Front Face: The LPJT95282-8CNL is specified without integrated status LEDs in the connector housing, making it suitable for systems that use separate board-level or front-panel status indicators.
  • EMI Tabs & T-Post Retention: The metal shield includes perimeter EMI tabs that can be incorporated into the system-level chassis and EMC design, while molded T-Post features help locate and mechanically retain the connector on the host PCB.

Internal Magnetics Architecture, 2.5GBASE-T Signaling, and PoE+ Power Delivery

The Ethernet port incorporates an internal 8-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the 2.5G PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.

The connector includes a Bob Smith termination (BST) circuit and is specified for Ethernet interfaces supporting AutoMDX operation. Internal center-tap windings are engineered to conduct continuous DC bias currents according to IEEE 802.3at PoE+ specifications without saturating the magnetic cores. Hardware designers should evaluate the MagJack together with the selected PHY reference design, differential-pair routing, PCB grounding, and system-level EMC requirements. The LPJT95282-8CNL is specified for Ethernet(PoE+) applications.

Mechanical Envelope and PCB Layout Considerations

When integrating the LPJT95282-8CNL into host hardware layouts, engineering teams should observe the following structural and layout parameters:

1. Package Dimensions and Enclosure Depth

The connector body measures 13.50 mm (0.531 inches) in height, 32.50 mm (1.280 inches) in length, and 16.50 mm (0.650 inches) in width. Designers should confirm that PCB component placement accommodates the extended 32.50 mm body depth required for integrated multi-gigabit magnetics and PoE+ power paths.

2. Tab-Up Latch Headroom and Servicing

Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can access and depress the plug latch during servicing.

3. 16P8C Interface and PCB Footprint

The connector provides an 8P8C RJ45 Ethernet interface together with a 16P8C through-hole PCB termination pattern accommodating 2.5G differential pairs and PoE+ power center taps. Designers should use the official LPJT95282-8CNL drawing to verify terminal numbering, drill-hole diameters, T-Post locations, and follow the manufacturer's recommended copper keep-out and clearance requirements on the host PCB.

4. PoE+ DC Current Trace Routing

Power traces routing from the center-tap pins to the host PD or PSE circuitry must be sized with sufficient copper width and weight to handle continuous DC currents according to IEEE 802.3at PoE+ requirements without excessive voltage drop or localized heating.

Design Consideration Comparison: Integrated MagJack vs. Discrete Solution

Design Consideration LPJT95282-8CNL
Integrated PoE+ 2.5G MagJack
Standard Non-PoE
2.5G MagJack
Discrete 2.5G PoE+ Magnetics
+ Modular RJ45 Jack
Power Delivery Capability Ethernet(PoE+) / IEEE 802.3at Non-PoE (Data only) PoE+ Supported (via discrete component)
Component Integration 2.5G magnetics and PoE+ center taps in one housing 2.5G magnetics without power paths Separate discrete PoE+ transformer and modular jack
PCB Assembly Single integrated connector assembly Single integrated connector assembly Separate magnetics and RJ45 connector components
Board-Edge Layout Consolidated footprint; power paths routed from jack pins Consolidated standard footprint Requires trace routing between discrete magnetics and connector
Vertical Height Envelope Fixed 13.50 mm profile Fixed ~13.50 mm profile Variable based on selected modular jack profile
Primary Engineering Focus Integrated PoE+ power delivery & 2.5G data Standard data-only networking Custom physical placement flexibility across board zones

Application Considerations for LPJT95282-8CNL

Target Application Profile Primary Engineering Consideration
Surgical Equipment & Patient Monitoring Systems Supports 2.5 Gbps multi-gigabit data rates and draws operating power over PoE+ within clinical equipment envelopes.
Medical Imaging & Diagnostic Hubs Transfers high-bandwidth diagnostic data streams while consolidating power and data over a single network line.
Multi-Gigabit Wireless Access Points (Wi-Fi 6) Provides 2.5 Gbps Ethernet uplinks and handles PoE+ power extraction for high-throughput dual-band wireless radios.
Commercial Network Gateways & Security Appliances Tab-Up latch orientation supports board-edge connector layouts, while perimeter shield tabs assist with system-level grounding and EMC design.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials using the LPJT95282-8CNL, hardware engineers should confirm the following design parameters against official documentation:

  • Footprint and Pinout Verification: Verify the 16P8C through-hole terminal layout, T-Post drill sizes, and shield pin locations against the official LINK-PP LPJT95282-8CNL drawing.
  • PoE+ Trace Current Capacity: Ensure host PCB copper traces connecting to the center-tap pins comply with IPC-2152 standards for IEEE 802.3at PoE+ continuous DC current levels.
  • Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the port for cable plug latch engagement and release.
  • Unilluminated Configuration: Confirm that the schematic symbol and PCB footprint match the LED-free LPJT95282-8CNL configuration shown in the official product drawing.
  • PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
  • Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0℃ TO 70℃ commercial temperature range, factoring in PoE+ DC bias heating.

Frequently Asked Questions

What are the primary specifications of the LINK-PP LPJT95282-8CNL?

The LPJT95282-8CNL is a single-port 2.5G Base-T Ethernet(PoE+) RJ45 MagJack. It features an 8P8C interface with a 16P8C through-hole PCB termination footprint, 8-core integrated magnetics, a 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, an unilluminated (Without LEDs) design, a metal shield with EMI tabs, an integrated BST circuit, AutoMDX support, and a specified operating temperature range of 0℃ TO 70℃.

Is the LINK-PP LPJT95282-8CNL compatible with the Halo HFJT1-2GHPRL?

The LPJT95282-8CNL is positioned as a cross-reference and alternative sourcing option for the Halo HFJT1-2GHPRL single-port 2.5G Base-T PoE+ RJ45 MagJack. It provides a comparable 1×1 port architecture, 2.5GBASE-T interface, IEEE 802.3at PoE+ power handling, 1CT:1CT turns ratio, 8-core-per-port configuration, Tab-Up latch orientation, unilluminated design, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.

What are the design considerations for a Tab-Up latch orientation?

A Tab-Up orientation positions the RJ45 plug release latch on the upper side of the connector. Board and enclosure designers should verify sufficient clearance above the port for plug insertion, latch engagement, and cable removal against the applicable mechanical drawing.

What does the unilluminated (LED-free) configuration mean?

The LPJT95282-8CNL is specified without integrated status LEDs in the RJ45 connector housing. This configuration can be considered for equipment that uses separate board-level or front-panel indicators. Engineers should refer to the official product drawing and schematic to verify the connector pin configuration and PCB footprint.

How does the LPJT95282-8CNL support Power over Ethernet Plus (PoE+)?

The LPJT95282-8CNL incorporates internal magnetic windings and center taps engineered to conduct continuous DC bias currents according to IEEE 802.3at PoE+ standards (supporting up to 30 W). This allows simultaneous 2.5 Gbps differential data transmission and DC power delivery over twisted-pair Ethernet cables without saturating the magnetic cores.

What is the function of the internal 8-core magnetics architecture?

The LPJT95282-8CNL specifies an 8-core integrated magnetic structure for its 2.5G Base-T Ethernet interface, with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection. Engineers should refer to the applicable LINK-PP schematic and electrical documentation for the exact magnetic topology and termination arrangement.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.