HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 1(1716428560290).webp
  • 3(1716428560281).webp
  • 2(1716428560315).webp
  • 4(1716428560262).webp
  • 5(1716428560261).webp

Belfuse 0826-1X1T-KH-F Compatible LPJT9471AONL 2.5G Base-T rj45 jack with magnetics PoE+ Single Port Tab Up Orange&Green/Yellow Leds

P/N:

LPJT9471AONL

Manufacturer:

LINK-PP

Compatible Brand:

Belfuse

Compatible P/N:

LPJT9471AONL

  • Compatible Brands: Belfuse
  • Number of Ports: 1X1
  • Speed: 2.5GBase-T
  • PoE: PoE+
  • Latch: Up
  • Mounting Type: THT
  • LED Option: Orange&Green / Yellow
  • Shield EMI Tabs: YES
  • Temperature: -40℃ to +85°C
  • P/N: LPJT9471AONL
  • Manufacturer: LINK-PP
  • Compatible Brand: Belfuse
  • Compatible P/N: 0826-1X1T-KH-F

Packaging Details:

N.W/pCS:

0.011kg

Package:

Tray

SPQ:

60pcs

Qty/carton:

840pcs

Carton size:

37*30*30cm

G.W/carton:

9kg

Product Specifications

LINK-PP Part Number LPJT9471AONL Belfuse Part Number 0826-1X1T-KH-F
Part Status Active Connector Type Jack
Number of Positions/Contacts 12P8C (RJ45, Ethernet) Application-LAN Ethernet (PoE+)
Number of Ports 1x1 Port Speed 2.5GBASE-T
Latch Up Cores per Port 8
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Orange & Green / Yellow
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 0.531 / 13.50 Package Length (Inches/mm) 1.280 / 32.50
Package Width (Inches/mm) 0.650 / 16.50 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

Single-Port 2.5GBASE-T Integrated RJ45 Magjack with PoE+ for High-Throughput Network Equipment

The LINK-PP LPJT9471AONL is a single-port integrated RJ45 MagJack designed for 2.5GBASE-T Ethernet applications with PoE+ requirements. It combines the RJ45 interface, Ethernet magnetics, Bob Smith termination, and status LEDs within a shielded connector assembly, helping reduce the number of separate magnetic and interface components required on the host PCB.

The connector uses a 90° right-angle, side-entry configuration with a Tab-Up latch, T-Post PCB retention, EMI shielding tabs, and an operating temperature range of -40°C to +85°C. Its compact 13.50 mm height and 16.50 mm width are suited to board-edge designs where connector height, port density, and front-panel alignment are important mechanical constraints.

LPJT9471AONL is designed as a compatible alternative to Belfuse 0826-1X1T-KH-F. Engineers should verify the mechanical drawing, pin assignment, PCB footprint, panel cutout, electrical specifications, and PoE implementation requirements before production release.

Ethernet Interface: 2.5GBASE-T
Power Architecture: PoE+ Application
Reference Part: Belfuse 0826-1X1T-KH-F
Operating Temperature: -40°C to +85°C
Mechanical Configuration: 1x1, Right-Angle, Tab-Up
Integrated Features: Magnetics, BST, EMI Shield, LEDs

2.5GBASE-T and PoE+ Create a Combined Signal and Power Design Challenge

An integrated 2.5GBASE-T PoE+ MagJack has to accommodate two different electrical functions within the same connector assembly: high-speed differential Ethernet transmission and DC power delivery over the twisted-pair interface.

For 2.5GBASE-T systems, the magnetic interface must preserve the differential signal path while maintaining the isolation and common-mode characteristics required by the Ethernet physical layer. When PoE is also implemented, the magnetic structure must accommodate the DC power path without compromising the intended Ethernet interface characteristics.

This makes magnetics selection more than a simple connector-footprint decision. Hardware designers should evaluate the connector together with the Ethernet PHY, PCB differential routing, PoE controller, cable category, common-mode behavior, isolation requirements, and system-level EMC design.

Magnetics Performance Under DC Bias

PoE introduces DC current into the Ethernet interface. From a magnetic-component perspective, excessive DC bias can affect the operating point of transformer cores and reduce available inductance if the magnetic design is not appropriately specified.

Reduced effective inductance can influence low-frequency signal behavior and contribute to degraded Ethernet link performance. For this reason, PoE-capable integrated magnetics should be evaluated using the applicable OCL, DC resistance, isolation, insertion loss, return loss, and DC-bias specifications rather than treating the connector as a purely mechanical RJ45 component.

The LPJT9471AONL integrates the magnetic interface into the connector assembly, allowing the host-board design to use a single integrated component rather than separately placing a non-magnetic RJ45 jack and external Ethernet magnetics.

Mechanical and PCB Design Considerations

Mechanical compatibility is a critical part of selecting a replacement RJ45 MagJack. The LPJT9471AONL uses a right-angle side-entry configuration with a Tab-Up latch and T-Post PCB retention structure.

1. 12P8C Interface and PCB Termination

The product specification identifies a 12P8C configuration with an 8-contact RJ45 mating interface. The PCB-side termination includes additional connections associated with the integrated magnetic, termination, LED, and application circuitry.

Because integrated MagJacks can use different pin assignments even when their external RJ45 interfaces appear identical, engineers should compare the complete pinout and mechanical drawing before treating two parts as PCB drop-in replacements.

2. Tab-Up Latch Orientation

The Tab-Up configuration places the RJ45 plug latch toward the upper side of the connector. This orientation should be matched to the equipment front-panel opening, cable access direction, neighboring components, and required plug-release clearance.

3. T-Post Mechanical Retention

The T-Post provides an additional mechanical locating and retention feature between the connector body and PCB. It should be considered together with the plated through-hole pattern, soldering process, connector support, and expected cable insertion and extraction forces.

4. Shielding and Chassis Integration

The integrated metal shield includes EMI grounding tabs. These features can form part of the equipment's overall shielding and grounding strategy when properly connected to the PCB or chassis structure.

Actual EMC performance depends on the complete implementation. PCB grounding, chassis bonding, connector-to-panel contact, cable shielding, differential-pair routing, and common-mode noise control must all be considered during system validation.

Integrated MagJack Architecture: Magnetics, BST, and LED Functions

The primary architectural advantage of an integrated MagJack is component consolidation. Instead of placing a non-magnetic RJ45 connector and separate Ethernet magnetics on the PCB, the LPJT9471AONL combines several interface functions within one connector assembly.

  • Integrated Ethernet Magnetics: The internal magnetic structure provides the transformer interface between the Ethernet PHY and the cable-side RJ45 interface.
  • BST Termination: The integrated Bob Smith termination network provides the specified common-mode termination function within the connector assembly.
  • LED Indicators: Integrated Orange & Green and Yellow LED options provide local port-status indication according to the host PHY and LED drive implementation.
  • EMI Shield: The metal shield provides a mechanical and electrical shielding structure around the connector interface.
  • AutoMDX Support: The product specification identifies AutoMDX support for compatible Ethernet PHY implementations.

Integrating these functions can simplify the host-board bill of materials and reduce the number of separate interface components around the Ethernet port. However, the host design still needs to follow the recommended PHY, magnetics, PoE, grounding, and PCB-layout requirements.

Architecture Comparison: Integrated 2.5G PoE+ MagJack vs. Alternative Implementations

Evaluation Metric LPJT9471AONL Integrated 2.5G PoE+ MagJack Discrete 2.5G Magnetics + Non-Magnetic Jack Standard 1GBASE-T PoE+ MagJack
Ethernet Speed 2.5GBASE-T Depends on selected magnetics and PHY Typically up to 1000BASE-T
PoE Architecture Integrated magnetic interface for PoE applications Requires separately specified PoE-capable magnetics Integrated magnetic interface for PoE applications
Component Integration RJ45 + magnetics + BST + LEDs RJ45 and magnetics implemented separately RJ45 + magnetics + related interface functions
PCB Layout Flexibility Moderate — integrated magnetic layout High — magnetics can be positioned independently Moderate
PCB Component Count Reduced — multiple interface functions are integrated Higher — separate connector and magnetic components Reduced
Primary Advantage Compact integrated Ethernet interface with 2.5G capability Greater control over magnetic selection and placement Established 1G Ethernet architecture

Application Considerations for LPJT9471AONL

Target Application Profile Potential Plating Option Primary Engineering Consideration
Industrial Ethernet Switches and Controllers Gold 15µ" / 30µ" -40°C to +85°C operation, mechanical retention, PoE requirements, and Ethernet signal integrity
Enterprise Multi-Gigabit Access Points Gold 15µ" 2.5GBASE-T connectivity combined with PoE+ power delivery
Networked Imaging and Monitoring Equipment Gold 15µ" / 30µ" Multi-gigabit data connectivity, connector durability, thermal range, and system-level isolation requirements
Industrial Vision and Automation Equipment Gold 15µ" / 30µ" High-throughput Ethernet, equipment vibration, thermal cycling, and PoE implementation

Frequently Asked Questions

Is the LINK-PP LPJT9471AONL a compatible alternative to the Belfuse 0826-1X1T-KH-F?

The LPJT9471AONL is designed as a compatible alternative to Belfuse 0826-1X1T-KH-F with a single-port 2.5GBASE-T MagJack configuration, Tab-Up latch, right-angle side entry, integrated magnetics, EMI shielding, and PoE+ application support. Engineers should verify the mechanical drawing, pin assignment, PCB footprint, and electrical specifications before production use.

Does the LPJT9471AONL support 2.5GBASE-T Ethernet?

Yes. The product specification identifies the LPJT9471AONL for 2.5GBASE-T applications. Final link performance depends on the Ethernet PHY, PCB layout, cable, magnetics characteristics, and complete system implementation.

Is the LPJT9471AONL suitable for PoE+ applications?

The product specification identifies the LPJT9471AONL for Ethernet PoE+ applications. The complete PoE implementation must be designed and validated according to the applicable PSE or PD architecture, PoE controller requirements, magnetic specifications, thermal conditions, and relevant Ethernet and PoE standards.

What does the 12P8C specification mean for this RJ45 MagJack?

The 12P8C specification identifies a 12-position connector configuration with 8 contacts at the RJ45 mating interface. The additional PCB-side terminations are associated with the integrated functions of the MagJack and should be verified against the manufacturer's pinout and schematic.

What LED configuration is integrated into the LPJT9471AONL?

The LPJT9471AONL is specified with Orange & Green and Yellow LED options. The host PCB should implement the LED drive circuitry according to the product electrical specifications and the selected Ethernet PHY.

What gold plating options are available for the LPJT9471AONL?

The LPJT9471AONL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be based on the required mating cycles, operating environment, connector qualification requirements, and applicable product specifications.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword:

Download

Q&A

图片名称

What certifications does LINK-PP have?


图片名称

LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.

图片名称

Can i get free samples before i make big quantity purchase?


图片名称

Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.