HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJE17208CNL带另一种弹片(1715745687432).jpg
  • LPJE17208CNL带另一种弹片2(1715745687825).jpg
  • LPJE17208CNL带另一种弹片3(1715745687562).jpg
  • LPJE17208CNL带另一种弹片4(1715745687560).jpg
  • LPJE17208CNL带另一种弹片1(1715745687519).jpg

Wurth 615016240521 Compatible LINK-PP LPJE17208CNL RJ45 2X1 Pcb Jacks without Magnetics transformer Without Leds

P/N:

LPJE17208CNL

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

Wurth

Compatible P/N:

615016240521

  • Compatible Brands: WE
  • Number of Ports: 2x1
  • Pin Type: THT SOLDER
  • LED Option: No LEDs
  • Latch: Both
  • Temperature: -40℃ to +85℃
  • Shield EMI Tabs: YES
  • Orientation: 90° Angle
  • P/N: LPJE17208CNL
  • Manufacturer: LINK-PP
  • Compatible Brand: Wurth
  • Compatible P/N: 615016240521

Packaging Details:

N.W/pCS:

0.016kg

Package:

Tray

SPQ:

35pcs

Qty/carton:

1400pcs

Carton size:

47*32*30.5cm

G.W/carton:

23kg

Product Specifications

LINK-PP Part Number LPJE17208CNL Wurth Part Number 615016240521
Part Status Active Connector Type Jack
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN -
Number of Ports 2x1 Port Speed -
Latch Both Cores per Port -
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Without LEDs
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 1.004 / 25.50 Package Length (Inches/mm) 1.122 / 28.50
Package Width (Inches/mm) 0.680 / 17.28 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

High-Density Stacked 2x1 RJ45 Modular Jack for Space-Constrained Industrial and Telecom Equipment

The LINK-PP LPJE17208CNL is a stacked 2x1 RJ45 modular jack designed for applications requiring two 8P8C Ethernet ports within a compact board-edge configuration. The connector features a right-angle side-entry orientation, integrated EMI shielding tabs, T-Post PCB retention, and an operating temperature range of -40°C to +85°C.

Its 2x1 stacked architecture places two RJ45 ports vertically rather than consuming the horizontal PCB space required by side-by-side connectors. This can help increase I/O port density where PCB edge space and front-panel dimensions are constrained. The connector is also positioned as an alternative to Wurth 615016240521 for designs requiring a comparable mechanical configuration, subject to final footprint and mechanical drawing verification.

Port Configuration: Stacked 2x1, 8P8C Dual Port
Reference Part: Wurth 615016240521
Operating Temperature: -40°C to +85°C
EMI Shielding: Shield with EMI Grounding Tabs
PCB Retention: T-Post Mechanical Retention
Contact Plating: Gold 6µ" / 15µ" / 30µ"

Why Stacked 2x1 RJ45 Connectors Matter in High-Density PCB Designs

When multiple Ethernet ports must be positioned along a restricted PCB edge, connector geometry becomes an important part of the overall mechanical and electrical design. A conventional side-by-side 1x2 configuration consumes additional horizontal board-edge space, while a stacked 2x1 configuration uses the vertical dimension to accommodate two ports.

For industrial Ethernet equipment, telecom line cards, network interface assemblies, embedded computing platforms, and other space-constrained systems, this topology can provide a practical way to increase port density without extending the connector footprint across a larger portion of the PCB edge.

The LPJE17208CNL combines the stacked port arrangement with a right-angle side-entry interface, T-Post PCB retention, and an EMI-shielded connector structure. These characteristics should be evaluated together with the PCB footprint, panel cutout, mating cable clearance, mounting method, and enclosure constraints during the mechanical design stage.

Mechanical Design Considerations for a Stacked RJ45 Modular Jack

Stacked RJ45 connectors introduce mechanical considerations that are less significant in some single-port connector layouts. Two cable interfaces are concentrated within the same connector body, so the mechanical design must account for insertion and extraction forces, PCB retention, solder-joint loading, connector height, and available clearance around the I/O panel.

1. T-Post PCB Retention

The LPJE17208CNL incorporates a T-Post retention structure in addition to its electrical terminals. The retaining structure helps locate and mechanically secure the connector body to the PCB during assembly and operation.

For production designs, engineers should verify the T-Post dimensions, hole locations, soldering process, and mechanical clearances against the manufacturer's mechanical drawing before releasing the PCB layout. Proper mechanical anchoring is particularly important for connectors exposed to repeated cable insertion, extraction, and external cable forces.

2. Right-Angle Side-Entry Configuration

The 90° right-angle configuration positions the RJ45 mating interface at the PCB edge and allows the connector to be integrated into equipment front panels and other side-entry I/O structures.

Mechanical verification should include the connector body dimensions of 25.50 mm height, 28.50 mm length, and 17.28 mm width, together with the required panel opening, cable bend radius, adjacent-port spacing, and enclosure clearance.

3. EMI Shielding Structure

The LPJE17208CNL includes an EMI shield with grounding tabs around the connector assembly. The shield provides a conductive mechanical structure that can be incorporated into the equipment's grounding and EMC strategy.

Actual EMI performance depends on the complete system implementation, including PCB grounding, chassis bonding, connector-to-panel contact, cable construction, signal layout, and shielding continuity. Therefore, connector-level shielding should not be treated as a substitute for system-level EMC validation.

Non-Magnetic Modular Jack Architecture and Discrete Magnetics

For designs using a non-magnetic modular jack, the Ethernet magnetics are implemented separately on the PCB rather than being integrated into the RJ45 connector housing. This architecture gives the hardware designer greater control over the selection and placement of transformer modules, common-mode filtering, protection components, and PHY-side circuitry.

A discrete magnetics architecture can be useful when the design requires a specific electrical isolation implementation, customized magnetic components, dedicated surge protection, or a particular PCB placement strategy.

When to Consider a Non-Magnetic RJ45 Jack

  • Discrete Ethernet magnetics are already specified elsewhere on the PCB.
  • The design requires independent selection of transformer or common-mode filtering components.
  • PCB layout requires greater control over the physical separation between the RJ45 interface, magnetics, PHY, and protection circuitry.
  • The equipment architecture requires a modular connector without integrated magnetics.
  • Available enclosure or thermal constraints make a discrete component arrangement preferable.

Engineers should distinguish between the mechanical connector interface and the complete Ethernet physical layer. A modular RJ45 jack does not by itself determine Ethernet speed, isolation performance, insertion loss, return loss, or EMC compliance. Those characteristics depend on the complete connector, magnetics, PCB, PHY, cable, and system implementation.

Contact Plating Selection: 6µ", 15µ", and 30µ" Gold

The contact mating area is available with 6µ", 15µ", or 30µ" gold plating options. Contact plating is an important consideration when selecting an RJ45 connector for equipment with different mating-cycle requirements and environmental conditions.

Thicker gold plating can provide increased protection of the mating interface against wear and environmental degradation, but the appropriate plating specification should be selected according to the actual mating-cycle requirement, environmental exposure, connector interface requirements, and applicable qualification data.

For high-cycle or harsher operating environments, engineers should confirm the applicable mating durability, plating construction, underplate material, and qualification results in the product documentation rather than selecting a plating thickness based solely on the numerical gold thickness.

Architecture Comparison: Stacked 2x1 Modular Jack vs. Alternative Configurations

Connector selection should consider more than the number of ports. PCB area, connector height, front-panel geometry, magnetics architecture, mechanical retention, thermal constraints, and EMC requirements all influence the appropriate RJ45 implementation.

Evaluation Metric LPJE17208CNL Stacked 2x1 Horizontal 1x2 Side-by-Side Stacked 2x1 Integrated Magjack
Port Density High — two ports arranged vertically Moderate — two ports arranged horizontally High — two ports arranged vertically
PCB Edge Utilization Reduced horizontal width Greater horizontal board-edge usage Reduced horizontal width
Magnetics Architecture Discrete PCB magnetics Discrete PCB magnetics Integrated magnetics
Mechanical Retention T-Post retention structure Depends on connector design Depends on connector design
Design Flexibility High — discrete magnetics can be independently selected High — discrete magnetics can be independently selected Magnetics configuration determined by connector design
Primary Design Trade-Off Requires adequate vertical clearance Consumes more horizontal PCB edge space Less flexibility in magnetics selection and placement

Application Considerations for LPJE17208CNL

Target Application Potential Configuration Primary Design Consideration
Industrial Ethernet Switches and Routers 15µ" / 30µ" gold options Temperature range, mechanical retention, vibration exposure, and mating-cycle requirements
Dual-Port Network Interface Cards 15µ" gold option High port density within a constrained PCB and bracket envelope
Telecom Access and Line Cards 15µ" / 30µ" gold options Discrete magnetics architecture, PCB layout, grounding, and environmental requirements
Embedded Computing and Carrier Boards 6µ" / 15µ" gold options Mechanical footprint, connector height, panel alignment, and PCB clearance

Frequently Asked Questions

Is the LINK-PP LPJE17208CNL a compatible alternative to the Wurth 615016240521?

The LPJE17208CNL is designed as a compatible alternative to Wurth 615016240521 with a stacked 2x1 configuration, right-angle side-entry orientation, 25.50 mm height, 28.50 mm length, 17.28 mm width, EMI shielding tabs, and T-Post PCB retention. Before production use, engineers should verify the mechanical drawing, PCB footprint, panel opening, and mating interface against the original component requirements.

What is the difference between a non-magnetic RJ45 jack and an integrated Magjack?

A non-magnetic RJ45 jack does not integrate the Ethernet magnetics into the connector housing. The transformer, common-mode filtering, protection, and related circuitry are instead implemented separately on the PCB. An integrated Magjack combines the RJ45 interface with Ethernet magnetics in one component. The appropriate architecture depends on the required electrical design, PCB layout, isolation strategy, and available space.

What is the purpose of the T-Post PCB retention mechanism?

The T-Post is a mechanical retention feature used to help locate and secure the stacked RJ45 connector body to the PCB. It provides additional mechanical support alongside the electrical terminals and should be evaluated together with the PCB hole pattern, soldering process, and expected cable insertion and extraction forces.

What gold plating options are available for the contact mating area?

The LPJE17208CNL is available with 6 micro-inch, 15 micro-inch, and 30 micro-inch gold plating options for the contact mating area. The appropriate option should be selected according to the required mating cycles, environmental conditions, and applicable product qualification requirements.

Does the LPJE17208CNL include integrated LED indicators?

No. The LPJE17208CNL is specified in a without-LED configuration. Link and activity indication can therefore be implemented separately according to the equipment's front-panel and PCB design requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword: