LPJE4016AHNL Tab Up Green/Yellow LED 1X4 Port RJ45 Modular Jacks Without Integrated Magnetics
P/N:
LPJE4016AHNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJE4016AHNL
- Compatible Brands: LINK-PP
- Number of Ports: 1x4
- Pin Type: THT SOLDER
- LED Option: Green/Yellow
- Latch: Up
- Temperature: -40℃ to +85℃
- Shield EMI Tabs: YES
- Orientation: 90° Angle
- P/N: LPJE4016AHNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJE4016AHNL
Packaging Details:
N.W/pCS:
0.026kg
Package:
Tray
SPQ:
30pcs
Qty/carton:
600pcs
Carton size:
46.5*27.5*24.5cm
G.W/carton:
15.8kg
Product Specifications
| LINK-PP Part Number | LPJE4016AHNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | - |
| Number of Ports | 1x4 Port | Speed | - |
| Latch | Up | Cores per Port | - |
| Orientation | 90° Angle (Right) | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Green / Yellow |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.516 / 13.10 | Package Length (Inches/mm) | 0.620 / 15.75 |
| Package Width (Inches/mm) | 2.510 / 63.75 | Temperature | -40°C to +85°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
1x4 Multi-Port Non-Magnetic RJ45 Modular Jack with LEDs for Embedded Mainboards and Network Equipment
The LINK-PP LPJE4016AHNL is a 1x4 multi-port (ganged) RJ45 modular jack designed for systems requiring four 8P8C Ethernet ports within a single horizontal board-edge assembly. Built without internal magnetics, it serves as a passive physical-layer connector, allowing hardware designers to place discrete Ethernet transformers and protection circuitry separately on the host PCB.
The connector features a 90° right-angle, side-entry through-hole mounting profile with a Tab-Up latch, integrated Green and Yellow status LEDs per port, T-Post mechanical PCB retention, and metal shielding with EMI tabs. Rated for an industrial operating temperature range of -40°C to +85°C, its 63.75 mm overall width provides high port density for embedded mainboards, multi-port routers, industrial PCs, and power supply monitoring hardware.
Hardware engineers should review the mechanical drawing, pin assignment, PCB land pattern, and panel cutout dimensions against system requirements before releasing board layouts for production.
Multi-Port 1x4 Ganged Architecture and Board-Edge Efficiency
Integrating four RJ45 ports into a single ganged housing provides structural and manufacturing advantages over placing four individual single-port jacks along the PCB edge:
- Unified Panel Alignment: A one-piece 1x4 housing eliminates port-to-port tolerance stack-up during assembly, ensuring consistent port pitch and simplified front-panel bezel cutouts.
- Manufacturing Efficiency: Handling a single 1x4 through-hole component reduces component pick-and-place cycles and simplifies wave or selective soldering processes compared to multiple discrete connectors.
- Continuous Shielding: The shared metal shield provides a unified ground structure across all four ports, facilitating chassis grounding through integrated perimeter EMI tabs.
Non-Magnetic Architecture and Discrete PHY/Magnetics Layout
Because the LPJE4016AHNL is a non-magnetic modular jack without internal transformer toroids, the Ethernet physical layer (PHY), isolation transformers, common-mode chokes, and transient voltage suppression (TVS) diodes are implemented externally on the host motherboard.
This discrete architecture provides hardware engineers with flexibility in component selection and board layout:
- Independent Magnetics Selection: Designers can choose discrete transformer modules tailored to specific isolation ratings, PHY transceiver vendor recommendations, or multi-port magnetic ICs.
- Physical Layer Routing Freedom: Differential pairs can be routed with optimized ground isolation boundaries between the PHY, discrete magnetics, and connector terminals.
- Thermal Decoupling: High-density multi-port PHY heat is dissipated on the board rather than trapped inside the connector cavity.
The connector operates as a passive mechanical interface; actual Ethernet speed, insertion loss, return loss, and EMC compliance are determined by the complete physical layer design, including discrete magnetics, PCB layout, PHY selection, and cabling.
Mechanical Design and Multi-Port Stress Distribution
Multi-port connectors experience combined mechanical forces during simultaneous cable mating, extraction, and cable pull:
1. 1x4 Package Dimensions
The connector measures 13.10 mm (0.516 inches) in height, 15.75 mm (0.620 inches) in length, and 63.75 mm (2.510 inches) in overall width, providing four standardized 8P8C ports along the board edge.
2. T-Post Mechanical Retention
Molded T-Post retention pegs anchor the connector housing into the PCB. These locating posts help distribute lateral shear and insertion forces across the substrate, reducing mechanical strain on the through-hole solder joints.
3. Tab-Up Latch Orientation
The Tab-Up configuration positions the RJ45 plug release latches toward the top surface of the connector, allowing unobstructed cable access when the board is mounted near the bottom of an enclosure.
4. Shielding and Chassis Integration
The integrated metal shield incorporates EMI grounding tabs that establish contact with the equipment front panel or bezel cutout. System-level EMC performance depends on PCB grounding, chassis bonding, and cable shielding continuity.
Contact Plating and LED Integration
The LPJE4016AHNL offers configurable options for mating durability and port status indication:
- Contact Plating Options: Available with 6µ", 15µ", or 30µ" gold plating in the contact mating area over nickel underplate. Thicker gold plating (15µ" or 30µ") is recommended for industrial applications subject to frequent mating cycles or harsh operating environments.
- Integrated Status LEDs: Each port incorporates Green and Yellow LEDs for visual link and activity status. Current-limiting resistors and drive circuitry must be implemented on the host PCB in accordance with PHY specifications.
Architecture Comparison: 1x4 Non-Magnetic Jack vs. Alternative Implementations
| Evaluation Metric | LPJE4016AHNL 1x4 Non-Magnetic Jack |
4 x Single-Port Non-Magnetic Jacks |
1x4 Integrated MagJack |
|---|---|---|---|
| Port Density & Pitch | Fixed 1x4 ganged alignment (63.75 mm width) | Variable — depends on discrete placement spacing | Fixed 1x4 ganged alignment |
| Magnetics Architecture | Discrete PCB magnetics | Discrete PCB magnetics | Integrated magnetics inside housing |
| Assembly Complexity | Low — single through-hole component | Higher — four individual placements required | Low — single component |
| Mechanical Anchoring | Multiple T-Posts & shield pins | Individual post per connector | Multiple posts & shield pins |
| Layout Flexibility | High — independent transformer selection | High — independent transformer selection | Fixed internal magnetic topology |
| Primary Application | Multi-port switches, embedded mainboards, routers | Distributed or custom-spaced port layouts | Standard I/O panels with integrated magnetics |
Application Considerations for LPJE4016AHNL
| Target Application Profile | Potential Configuration | Primary Engineering Consideration |
|---|---|---|
| Embedded Mainboards & Single-Board Computers | Gold 15µ" / 30µ" | Four-port consolidation, -40°C to +85°C thermal stability, and flexible discrete physical-layer routing. |
| Multi-Port Routers & Network Gateways | Gold 15µ" | Compact 1x4 front-panel I/O, integrated status LEDs, and uniform port alignment. |
| Industrial PCs & Automation Controllers | Gold 15µ" / 30µ" | Robust T-Post mechanical anchoring, industrial operating temperature range, and vibration resistance. |
| Switched-Mode Power Supplies (SMPS) & Monitors | Gold 6µ" / 15µ" | Galvanic isolation implemented via specialized discrete magnetics on the host PCB. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJE4016AHNL, hardware engineers should confirm the following parameters against the official product drawing:
- Package Dimensions & Pitch: Verify the 63.75 mm width, 13.10 mm height, and port-to-port center spacing against front-panel cutout drawings.
- PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes on the manufacturer's footprint.
- LED Pinout & Polarity: Verify LED anode/cathode pin assignments and implement appropriate series current-limiting resistors on the host board.
- Discrete Magnetics Placement: Ensure adequate board space between the connector pins and discrete LAN transformers for differential trace routing.
- Thermal & Operating Environment: Confirm the operating environment is within the specified -40°C to +85°C temperature range.
- Mechanical Clearances: Check vertical clearance for Tab-Up plug latch release within the equipment enclosure.
Frequently Asked Questions
What are the primary design features of the LINK-PP LPJE4016AHNL?
The LPJE4016AHNL is a 1x4 multi-port (ganged) non-magnetic RJ45 modular jack. It features an 8P8C contact configuration, 90° right-angle side-entry through-hole mounting, Tab-Up latches, integrated Green/Yellow LEDs for each port, T-Post PCB retention, EMI shielding tabs, and an operating temperature range of -40°C to +85°C.
Why choose a 1x4 non-magnetic RJ45 jack instead of an integrated 1x4 MagJack?
A non-magnetic RJ45 jack allows hardware designers to place discrete Ethernet transformers, common-mode chokes, and surge protection components separately on the PCB. This architecture provides flexibility to select customized magnetics, implement specific isolation ratings, and optimize board-level thermal dissipation away from the connector cavity.
What mechanical advantage does a ganged 1x4 connector offer over individual single-port jacks?
A ganged 1x4 connector provides fixed port spacing and precise alignment within a single 63.75 mm housing, eliminating cumulative assembly tolerances associated with placing four individual jacks. It also simplifies PCB assembly and front-panel bezel cutout design.
How should the integrated Green/Yellow LEDs be driven on the host PCB?
The integrated LEDs are passive indicators with through-hole pins routed to the PCB. Designers must implement external current-limiting resistors and drive circuits connected to the Ethernet PHY LED outputs according to the forward voltage and current ratings in the product datasheet.
What is the purpose of the T-Post retention structure on this multi-port connector?
The molded T-Post retention pegs provide mechanical locating and anchoring into the PCB. Across a 63.75 mm multi-port connector, these posts help distribute mechanical stresses from cable insertion, extraction, and cable pull, protecting the soldered signal pins from mechanical fatigue.
What contact plating options are available for the LPJE4016AHNL?
The LPJE4016AHNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options in the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































