HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • LPJE201-0AHNL左绿右黄.jpg
  • 左绿右黄带弹1(1715567644234).jpg
  • 左绿右黄带弹(1715567644169).jpg
  • 左绿右黄带弹2(1715567644288).jpg
  • LPJE201-0AHNL左禄右黄1.jpg

LPJE201-0AHNL RJ45 1X2 Port Jacks Without Integrated Magnetics Tab UP Green/Yellow LED

P/N:

LPJE201-0AHNL

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

LINK-PP

Compatible P/N:

LPJE201-0AHNL

  • Compatible Brands: LINK-PP
  • Number of Ports: 1x2
  • Pin Type: THT SOLDER
  • LED Option: Green/Yellow
  • Latch: Up
  • Temperature: -40℃ to +85℃
  • Shield EMI Tabs: NO
  • Orientation: 90° Angle
  • P/N: LPJE201-0AHNL
  • Manufacturer: LINK-PP
  • Compatible Brand: LINK-PP
  • Compatible P/N: LPJE201-0AHNL

Packaging Details:

N.W/pCS:

0.009kg

Package:

Tray

SPQ:

40pcs

Qty/carton:

2000pcs

Carton size:

58.5*33*25cm

G.W/carton:

18.5kg

Product Specifications

LINK-PP Part Number LPJE201-0AHNL Connector Type Jack
Part Status Active Mounting Type Through Hole
Number of Positions/Contacts 8p8c (RJ45, Ethernet) Application-Lan -
Number of Ports 1x2 Port Speed -
Latch UP Cores per Port -
Orientation 90° Angle (Right) PCB Mount Angle SIDE ENTRY
Shield EMI Tabs Without LED Option Green/Yellow Led
PCB FR4 PCB Retaining Post T POST
Package Height (Inches/mm) 0.516/13.10 Package Length (Inches/mm) 0.620/15.75
Package Width (Inches/mm) 1.270/32.25 Temperature -40℃ TO 85℃
Bst Circuit Yes AutomDX YES
Diodes No Contact Mating Area Plating GOLD 6u"/15u"/30u"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T,C

LINK-PP LPJE201-0AHNL 1x2 Dual-Port Non-Magnetic RJ45 Jack Technical Overview

The LINK-PP LPJE201-0AHNL is an industrial-grade 1x2 ganged dual-port (2-port total) non-magnetic RJ45 modular jack featuring an ultra-low package height of 13.10mm [.516 in], Green/Yellow status LEDs, Tab-Up latching, and solderless T-Post PCB retention. Designed specifically for entrance guard access control panels, industrial PCs, routers, and switches utilizing discrete on-board Ethernet transformers and PHY transceivers, it provides a 2-port physical interconnect, 1500Vrms isolation pass-through, and extended operating temperature endurance from -40°C to +85°C.

  • 1x2 Ganged Dual-Port Architecture: Consolidates two RJ45 ports side-by-side into a single 32.25mm wide metal-shielded housing, saving PCB front-panel real estate and SMT placement cycles.
  • Non-Magnetic Modular Jack Design: Pure 8p8c physical connector array without internal magnetic transformers or chokes, ideal for mainboard architectures with discrete board-mounted magnetics.
  • Industrial Temperature Endurance (-40°C to +85°C): Certified for severe thermal operating environments (-40°F to +185°F) with optional 6u", 15u", or 30u" gold contact plating for entrance guard systems and industrial PCs.
  • Low-Profile Package Height (13.10mm / 0.516 in): Compact 13.10mm package height minimizes vertical clearance for tight industrial enclosures and access control panels.

LINK-PP LPJE201-0AHNL 1x2 Dual-Port Modular RJ45 Jack Overview

LINK-PP LPJE201-0AHNL is a right-angle side-entry 1x2 ganged 2-port RJ45 modular jack without internal magnetics. Designed for hardware architectures where signal transformers and common-mode chokes are placed discretely on the motherboard, this non-magnetic connector array provides a 2-port physical interface. Featuring Green/Yellow visual status LEDs per port, a low package height of 13.10mm (0.516 in), and T-Post THT mounting, it simplifies layout in entrance guard access control systems, Industrial PCs, commercial routers, and Ethernet switches.

Key Benefits of LINK-PP LPJE201-0AHNL Dual-Port Non-Magnetic RJ45 Connector

  • 1x2 Dual-Port Consolidation Saves Front-Panel Space: Combines two RJ45 ports side-by-side into a single 32.25mm wide package, streamlining automated Pick & Place insertion compared to discrete single-port connectors.
  • Pure Non-Magnetic Architecture for Discrete Transformer Designs: Allows hardware engineers to place specialized high-voltage discrete transformers, multi-channel PHY magnetics, or custom EMI filtering networks directly on the motherboard.
  • Industrial Operating Temperature Range (-40°C to +85°C): Built with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor entrance guard panels and factory automation cabinets.
  • Integrated Green/Yellow Diagnostic LEDs per Port: Built-in LED indicators provide clear visual diagnostics for Ethernet link establishment and data activity status on each port.
  • Low-Profile 13.10mm Package Height: Compact vertical profile fits easily into slim entrance guard enclosures, access control boxes, and industrial computers.
  • Customizable Gold Contact Plating: Available in Gold 6u", 15u", or 30u" plating thickness options to ensure low contact resistance and corrosion protection across 750+ mating cycles per port.

Non-Magnetic Architecture & 1x2 Ganged Board Design Advantages

The LINK-PP LPJE201-0AHNL utilizes a specialized 1x2 Ganged Non-Magnetic Modular Jack architecture that embeds no internal transformers, common-mode chokes, or resistors inside the connector housing.

Discrete Transformer Design Compatibility

In entrance guard systems and industrial PCs, system designers frequently place discrete multi-channel transformer chips directly on the mainboard to achieve custom surge protection ratings, high-voltage galvanic isolation (>2KVrms), or to match multi-port PHY transceiver reference designs. The LPJE201-0AHNL provides a robust 2-port physical interconnect without introducing redundant internal inductance or signal distortion.

1x2 Ganged Package Geometry & Low Profile

With package dimensions of 13.10mm H x 15.75mm L x 32.25mm W, the LPJE201-0AHNL provides a compact 2-port footprint. T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging, absorbing insertion forces without straining solder joints.

Target Applications: Entrance Guard Systems, Industrial PCs, and Routers

Combining 1x2 2-port ganged density, non-magnetic architecture, Green/Yellow LEDs, low 13.10mm profile height, and industrial thermal endurance (-40°C to +85°C), the LINK-PP LPJE201-0AHNL supports diverse embedded systems:

  • Commercial Entrance Guard Systems & Access Control Panels: Ideal for door access controllers, commercial security intercom terminals, and smart lock access gateways requiring dual Ethernet ports.
  • Industrial PCs (IPC) & Single Board Computers: Deployed in industrial computers, DIN-rail automation controllers, and embedded mainboard expansion cards.
  • Commercial Routers & Ethernet Switches: Suitable for multi-LAN broadband routers, SD-WAN edge gateways, and unmanaged network switches.

How to Select and Verify LINK-PP LPJE201-0AHNL RJ45 Jack

Hardware design engineers and procurement specialists evaluating the LINK-PP LPJE201-0AHNL for new designs or second-source qualification should verify the following core parameters:

  • Discrete Magnetics Verification: Confirm that your motherboard schematic includes on-board discrete Ethernet transformers and PHY magnetics, as this jack contains no internal magnetics.
  • 1x2 Footprint & Package Width Alignment: Confirm that the 1x2 ganged through-hole pin arrangement, 32.25mm package width, and T-Post peg locations match your PCB land pattern.
  • Green/Yellow LED Driving Polarity: Confirm that the Green/Yellow LED configuration and pin driving polarity match your host SMT LED driver schematic.
  • Operating Temperature Requirements: Confirm that the -40°C to +85°C industrial temperature envelope satisfies your product's environmental specification.

Frequently Asked Questions

What is LINK-PP LPJE201-0AHNL?

LINK-PP LPJE201-0AHNL is a dual-port (1x2) side-by-side non-magnetic RJ45 modular jack featuring Green/Yellow LEDs, a low package height of 13.10mm, and an operating temperature range of -40°C to +85°C.

Does LINK-PP LPJE201-0AHNL contain internal Ethernet magnetics?

No. LPJE201-0AHNL is a pure non-magnetic RJ45 modular jack array designed for board architectures that use discrete isolation transformers and common-mode chokes mounted directly on the motherboard.

What is the port configuration of LPJE201-0AHNL?

LPJE201-0AHNL features a 1x2 ganged port configuration, providing two independent RJ45 Ethernet ports (1 row x 2 columns) in a single 32.25mm wide package.

What is the operating temperature range of LPJE201-0AHNL?

LINK-PP LPJE201-0AHNL is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and entrance guard access panels.

Does LINK-PP LPJE201-0AHNL include integrated status LEDs?

Yes. LPJE201-0AHNL features integrated Green/Yellow status LEDs per port to provide visual link speed and data traffic diagnostics.

What is the package height of LPJE201-0AHNL?

LPJE201-0AHNL features a low profile package height of 13.10mm (0.516 inches), making it ideal for compact entrance guard panels and slim industrial computers.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword: