LPJE4713CNL 1X1 Port Without LED PCB Edge THT Shielded Low Profile RJ45 Jack Without Integrated Magnetics
P/N:
LPJE4713CNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJE4713CNL
- Compatible Brands: LINK-PP
- Number of Ports: 1x1
- Pin Type: THT SOLDER
- LED Option: No LEDs
- Latch: Up
- Temperature: -40℃ to +85℃
- Shield EMI Tabs: YES
- Orientation: 90° Angle
- P/N: LPJE4713CNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJE4713CNL
Packaging Details:
N.W/pCS:
0.004kg
Package:
Tray
SPQ:
100pcs
Qty/carton:
3000pcs
Carton size:
54.5*28.5*27cm
G.W/carton:
13.1kg
Product Specifications
| LINK-PP Part Number | LPJE4713CNL | Connector Type | Jack |
| Part Status | Active | Mounting Type | Through Hole |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | - |
| Number of Ports | 1x1 Port | Speed | - |
| Latch | Up | Cores per Port | - |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Without Leds |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.449/11.40 | Package Length (Inches/mm) | 0.781/19.84 |
| Package Width (Inches/mm) | 0.726/18.45 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
LINK-PP LPJE4713CNL Technical Overview
The LINK-PP LPJE4713CNL is a single-port (1x1) low-profile (11.40mm height) non-magnetic RJ45 modular jack featuring Tab-Up latch orientation, a non-LED faceplate, and external EMI spring tabs. Designed for PCB edge through-hole technology (THT) side-entry mounting on FR4 substrates, it accommodates space-constrained motherboard layouts requiring discrete PCB-mounted magnetics across an extended industrial operating temperature range of -40°C to +85°C.
- Low-Profile 11.40mm Package Height: Reduced 0.449-inch package height optimizes vertical clearance in thin intercom enclosures, IPCs, and slim routers.
- Unmagnetized Modular Architecture: Designed without internal transformers to mate with discrete, PCB-mounted magnetic modules or custom PHY topologies.
- Industrial Operating Temperature (-40°C to +85°C): Fully rated for harsh environmental conditions, unconditioned outdoor cabinets, and industrial networking hardware.
- Metal Shielding With EMI Spring Tabs: External EMI spring tabs establish multi-point grounding contact with chassis panel cutouts for enhanced EMC performance.
Key Design Benefits
- Vertical Space Optimization: The 11.40mm (0.449 in) package height frees up vertical clearance in slim single-board computers, 1U chassis sub-assemblies, and industrial PCs.
- Discrete Magnetics Compatibility: Allows hardware designers to pair the connector with specialized discrete isolation transformers or PHY reference designs on the motherboard.
- Extended Industrial Thermal Range: Operates reliably across -40°C to +85°C, making it suitable for outdoor IP intercoms, industrial PCs, and field routers.
- Integrated Chassis EMI Grounding: External EMI spring tabs ensure grounding continuity against the enclosure panel cutout, helping suppress radiated EMI.
- Supply Chain Continuity: Offers hardware engineering and procurement teams an industrial-grade, low-profile 1x1 THT footprint option for secondary sourcing.
Mechanical & Substrate Integration
Designed for automated through-hole technology (THT) assembly, the LPJE4713CNL incorporates compact package dimensions of 11.40mm (H) x 18.45mm (W) x 19.84mm (L) [0.449 x 0.726 x 0.781 in]. The Tab-Up 90-degree right-angle side-entry profile aligns with thin chassis panel cutouts. Contact mating areas are available with Gold 6u", 15u", or 30u" plating options to ensure corrosion resistance across repeated mating cycles.
Target Applications
- IP Intercom Systems & Access Control: Low-profile (-40°C to +85°C) non-magnetic RJ45 interface for shallow intercom panels and security controllers.
- Industrial PCs & Thin Client Mainboards: Space-saving 11.40mm modular jack for compact IPC mainboards and embedded automation hardware.
- Switches & Compact Routers: Low-profile PCB-edge modular jack for thin network appliances and industrial Ethernet switches using discrete PHY magnetics.
LINK-PP LPJE4713CNL Design Verification Checklist
When evaluating the LINK-PP LPJE4713CNL for new designs or second-sourcing qualification, hardware engineers should verify the following parameters against their system specification:
- Discrete Magnetics Requirement: Confirm that your circuit design utilizes discrete board-mounted transformers rather than an integrated magnetic module (ICM).
- Low-Profile Height Clearance: Confirm that your front-panel cutout matches the 11.40mm (0.449 in) package height specification.
- Thermal Class Verification: Confirm that the -40°C to +85°C industrial temperature rating meets your target operating environment requirements.
- Tab-Up Latch & EMI Tabs: Verify that your enclosure faceplate accommodates a Tab-Up top-latching profile and chassis EMI spring tab grounding.
Frequently Asked Questions
What are the primary mechanical and electrical specs of the LINK-PP LPJE4713CNL?
The LPJE4713CNL is a single-port (1x1) low-profile (11.40mm height) unmagnetized RJ45 modular jack featuring Tab-Up latching, non-LED faceplate, external EMI spring tabs, 90-degree THT side-entry mounting, and an extended industrial operating temperature rating of -40°C to +85°C.
What is the mechanical advantage of the 11.40mm low-profile package height on the LPJE4713CNL?
At 11.40mm (0.449 inches) in height, the LPJE4713CNL is significantly lower than standard 13.30mm/13.40mm RJ45 jacks, allowing engineers to save valuable vertical clearance in thin industrial PCs, intercom panels, and compact routers.
What engineering assets are available for LPJE4713CNL PCB design-in?
LINK-PP provides complete design-in support assets, including 3D STEP models for mechanical enclosure clearance, 2D dimensional CAD drawings, PCB footprint land patterns for EDA software (Altium, Cadence, KiCad), and product specification sheets.
How can procurement and engineering teams request samples or a quotation for LINK-PP LPJE4713CNL?
Procurement and engineering teams can contact LINK-PP to request LPJE4713CNL evaluation samples for mechanical, electrical, and PCB compatibility verification. After qualification, our technical sales team can provide competitive pricing, production lead-time estimates, MOQ terms, and volume-order support.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































