HOT CROSS-REFERENCE SEARCHES All Products
HR911105A Cisco GLC-LH-SMD Pulse J1011F21PNL LPJG0926HENL TE 2170704-1 SFP-10G-SR
POPULAR CATEGORIES
Matched Parts (Real-time ES) Use ↑ ↓ to select, Enter to open
+
  • 2(1715222781687).jpg
  • 4(1715222781657).jpg
  • 3(1715222781598).jpg
  • 5(1715222781715).jpg
  • 1(1715222781487).jpg

X Multiple XRJD-S-24-8-8-4 Compatible LINK-PP LPJE108XAHNL Tab Up Green/Yellow LED 2X4 Port Connector Ethernet without Integrated Magnetics

P/N:

XRJD-S-24-8-8-4

Manufacturer:

LINK-PP

Classification:

Compatible Brand:

X Multiple

Compatible P/N:

XRJD-S-24-8-8-4

  • Compatible Brands: X Multiple
  • Number of Ports: 2x4
  • Pin Type: THT SOLDER
  • LED Option: Green/Yellow
  • Latch: Both
  • Temperature: -40℃ to +85℃
  • Shield EMI Tabs: YES
  • Orientation: 90° Angle
  • P/N: XRJD-S-24-8-8-4
  • Manufacturer: LINK-PP
  • Compatible Brand: X Multiple
  • Compatible P/N: XRJD-S-24-8-8-4

Packaging Details:

N.W/pCS:

0.071kg

Package:

Tray

SPQ:

10pcs

Qty/carton:

200pcs

Carton size:

37.5*24*34.5cm

G.W/carton:

14.2kg

Product Specifications

LINK-PP Part Number LPJE108XAHNL X Multiple Part Number XRJD-S-24-8-8-4
Part Status Active Connector Type Jack
Number of Positions/Contacts 8P8C (RJ45, Ethernet) Application-LAN -
Number of Ports 2x4 Port Speed -
Latch Both Cores per Port -
Orientation 90° Angle (Right) PCB Mount Angle Side Entry
Shield EMI Tabs With LED Option Green / Yellow
PCB FR4 PCB Retaining Post T-Post
Package Height (Inches/mm) 1.000 / 25.40 Package Length (Inches/mm) 1.108 / 28.15
Package Width (Inches/mm) 2.514 / 63.86 Temperature -40°C to +85°C
BST Circuit Yes AutoMDX Yes
Diodes No Contact Mating Area Plating Gold 6µ" / 15µ" / 30µ"
Turns Ratio RX/TX 1CT:1CT Configuration RX/TX T, C

X Multiple XRJD-S-24-8-8-4 Compatible Stacked 2x4 Port Non-Magnetic RJ45 Modular Jack with LEDs

The LINK-PP LPJE108XAHNL is a high-density stacked 2x4 multi-port (8-port) RJ45 modular jack engineered for networking and embedded hardware applications requiring a passive physical interconnect without integrated magnetics. For hardware engineers, it arranges eight 8P8C ports into a dual-row (2-over-4) matrix within a 63.86 mm width, providing integrated Green/Yellow LEDs, dual latching, and a defined mechanical envelope for discrete physical-layer designs. For OEM and procurement teams, the LPJE108XAHNL provides an alternative sourcing option for the X Multiple XRJD-S-24-8-8-4, consolidating eight ports into a single through-hole component to reduce BOM line items and streamline assembly.

Featuring a 90° right-angle, side-entry profile with perimeter EMI grounding tabs, T-Post mechanical PCB retention, and an extended industrial operating temperature range of -40°C to +85°C, the connector is suited for intercom master stations, embedded mainboards, multi-port switches, and routers. Engineering and procurement teams should verify the mechanical drawing, pin assignment, PCB land pattern, and PHY interface documentation before production release.

Port Layout: Stacked 2x4 (8 Ports Total)
Connector Type: Non-Magnetic Modular Jack
Reference Part: X Multiple XRJD-S-24-8-8-4
Operating Temperature: -40°C to +85°C Industrial
Latching: Dual Latch (Both)
LED Option: Green / Yellow LEDs

X Multiple XRJD-S-24-8-8-4 Compatible Design Positioning

The LPJE108XAHNL is positioned as a compatible alternative to the X Multiple XRJD-S-24-8-8-4 for multi-port Ethernet applications, providing hardware engineering and procurement teams with a potential second-source option for designs requiring comparable package dimensions, pinout footprints, and mechanical interface characteristics.

To ensure proper integration on existing or new motherboard designs, engineering teams should cross-reference the mechanical drawing, pin assignment, solder pad geometry, and LED pinout against original design requirements prior to volume release.

Stacked 2x4 Multi-Port Topology and Board-Edge Space Optimization

Arranging multiple Ethernet interfaces into a stacked vertical matrix provides packaging and layout advantages for high-density systems:

  • 8-Port Density Consolidation: Arranging eight RJ45 ports into a dual-row (2-over-4) 63.86 mm housing provides a substantially narrower board-edge footprint than placing eight single-port connectors or two horizontal 1x4 ganged jacks side-by-side.
  • Unified Front-Panel Faceplate Alignment: A single stacked 2x4 component ensures consistent port spacing and precise alignment across all eight ports, simplifying enclosure bezel cutout design and tolerance management.
  • -40°C to +85°C Industrial Operating Range: The -40°C to +85°C specification defines the stated operating temperature range of the connector assembly, making it relevant to industrial hardware exposed to wider ambient temperature conditions.

Non-Magnetic Architecture and Discrete PHY/Magnetics Layout

Because the LPJE108XAHNL is a non-magnetic modular jack without internal transformer toroids, the Ethernet physical layer (PHY), isolation transformers, common-mode chokes, and surge protection components are implemented externally on the host motherboard.

This discrete architecture provides hardware engineers with flexibility in component selection and board layout:

  • Independent Magnetics Selection: Designers can pair the connector with discrete single-port, dual-port, or quad-port LAN transformer modules tailored to specific isolation ratings, PHY transceiver recommendations, or custom magnetic circuits.
  • Physical Layer Routing Freedom: Differential pairs can be routed with optimized ground isolation boundaries between multi-channel PHY transceivers, discrete magnetics, and connector terminals.
  • Thermal Separation: Heat generated by high-density multi-port PHY chips is dissipated across the motherboard rather than concentrated inside the connector cavity.

The connector operates as a passive mechanical interface; actual network speed, insertion loss, return loss, and EMC compliance are determined by the complete physical-layer design, including discrete magnetics, PCB layout, PHY selection, and cabling.

Mechanical Design and Stacked Multi-Port Considerations

High-port-count stacked connectors require careful review of mechanical dimensions and user interface accessibility:

1. 2x4 Package Envelope

The connector body measures 25.40 mm (1.000 inch) in height, 28.15 mm (1.108 inches) in length, and 63.86 mm (2.514 inches) in width. Mechanical designers must verify vertical clearance within 1U enclosure envelopes including motherboard standoff heights.

2. Dual Latch Configuration (Latch: Both)

The connector uses opposing latch orientations, with Tab-Up latches on the upper row of ports and Tab-Down latches on the lower row. This arrangement can improve access to individual plug-release tabs in a stacked 8-port configuration, subject to surrounding enclosure geometry.

3. T-Post Mechanical Retention

Molded T-Post retention features help position and mechanically retain the 63.86 mm wide connector housing on the FR4 PCB. The host PCB design should be evaluated together with the connector solder joints to provide adequate mechanical support during repeated cable insertion, extraction, and handling.

4. Shielding and Status LEDs

The connector is wrapped in a metal shield equipped with perimeter EMI grounding tabs designed to interface with the equipment front-panel structure as part of the system-level shielding and grounding design. Green and Yellow status LEDs provide visual indication of link status and network activity for each port.

Architecture Comparison: Stacked 2x4 Non-Magnetic Jack vs. Alternative Implementations

Evaluation Metric LPJE108XAHNL
Stacked 2x4 Non-Magnetic
Stacked 2x4
Integrated MagJack
8 x Single-Port
Non-Magnetic Jacks
Port Configuration 2x4 (8 Ports Total) 2x4 (8 Ports Total) 8 x Discrete Ports
Magnetics Architecture Discrete PCB magnetics Integrated magnetics inside housing Discrete PCB magnetics
Horizontal Board Width 63.86 mm Model-dependent Model-dependent (Typically wider)
Vertical Height Profile 25.40 mm 25.40 mm – 28.00 mm Typically 13.50 mm
Assembly Placements Single connector assembly Single connector assembly Eight individual placements
Primary Design Focus Consolidates 8 ports for discrete magnetics designs All-in-one connector with internal magnetics Custom-spaced or distributed port layouts

Application Considerations for LPJE108XAHNL

Target Application Profile Primary Engineering Consideration
IP Intercom Master Stations & Access Hubs Consolidates eight network ports in a compact 63.86 mm width; -40°C to +85°C operating range.
Multi-Port Network Switches & Routers Allows pairing with customized multi-channel discrete LAN transformers on the host motherboard.
Embedded Single-Board Computers & Mainboards Stacked 2-over-4 architecture saves horizontal board-edge space for power and expansion interfaces.
Industrial Automation & Factory Controller Racks T-Post mechanical retention across 63.86 mm width; integrated Green/Yellow status LEDs.

Engineering Verification Checklist

Before releasing a PCB layout or finalizing a bill of materials (BOM) using the LPJE108XAHNL, hardware engineers should confirm the following design parameters against the official product drawing:

  • Package Dimensions & Vertical Clearance: Verify the 25.40 mm height, 63.86 mm width, and 28.15 mm length against enclosure height and front-panel cutout dimensions.
  • PCB Land Pattern: Check through-hole pad diameters, T-Post hole locations, and shield ground pin drill sizes across the entire 8-port footprint drawing.
  • Discrete Magnetics Placement: Ensure adequate board area between connector pins and discrete LAN transformer modules for multi-channel differential trace routing.
  • Dual Latch Clearances: Ensure adequate clearance above and below the connector faceplate cutout for both upper (Tab-Up) and lower (Tab-Down) plug latch disengagement.
  • LED Drive Circuitry: Implement suitable series current-limiting resistors and drive circuits on the host PCB matched to the selected PHY.
  • Thermal Operating Environment: Confirm that the component operating environment remains within the specified -40°C to +85°C industrial temperature range.

Frequently Asked Questions

Is the LINK-PP LPJE108XAHNL a compatible alternative to the X Multiple XRJD-S-24-8-8-4?

The LPJE108XAHNL is designed as a compatible alternative to the X Multiple XRJD-S-24-8-8-4 with a stacked 2x4 (8-port) non-magnetic RJ45 modular jack configuration, dual latching (Both), Green/Yellow LEDs, 90° right-angle through-hole mounting, T-Post PCB retention, metal shield with EMI tabs, and an industrial operating temperature range of -40°C to +85°C. Engineers should verify the mechanical drawing, pin assignments, and PCB land pattern before production use.

Why choose a stacked 2x4 non-magnetic RJ45 jack over an integrated MagJack?

A non-magnetic RJ45 jack allows hardware designers to place discrete Ethernet transformers, common-mode chokes, and surge protection components separately on the PCB. This architecture provides flexibility to select customized magnetics, implement specific high-voltage isolation ratings, and optimize board-level thermal dissipation away from the connector cavity.

What is the mechanical benefit of a stacked 2x4 connector configuration?

A stacked 2x4 connector arranges eight ports in a 2-over-4 matrix occupying 63.86 mm of horizontal board width, providing a substantially narrower board-edge footprint than placing eight discrete jacks side-by-side. This supports higher port density on front panels where horizontal space is constrained.

What does the "Both" latch specification indicate?

The "Both" latch specification indicates that the connector uses dual-direction latching: the top row of four ports features Tab-Up latches, while the bottom row features Tab-Down latches. This orientation can improve access to individual release tabs across the 8-port matrix, subject to surrounding enclosure geometry.

How should the integrated Green/Yellow LEDs be driven?

The integrated LEDs are passive indicators with through-hole pins routed to the PCB. Designers must implement external current-limiting resistors and drive circuits connected to the Ethernet PHY LED outputs according to the forward voltage and current ratings in the product datasheet.

What contact plating options are available for the LPJE108XAHNL?

The LPJE108XAHNL is available with 6 micro-inch, 15 micro-inch, or 30 micro-inch gold plating options at the contact mating area. Selection should be evaluated based on the expected mating cycles, operating environment, and application durability requirements.

Packaging, Shipping and Global Delivery for Networking Products

Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.

Anti-Static Protective Packaging

Anti-Static Protective Packaging

Protect networking products from electrostatic discharge and handling-related damage.

Shock-Resistant Transport Protection

Shock-Resistant Transport Protection

Protect products against physical impacts during storage and international transportation.

Fast Order Processing and Dispatch

Fast Order Processing and Dispatch

Accelerate order handling to ensure quick warehouse deployment.

Global Logistics and International Delivery

Global Logistics and International Delivery

Ship products efficiently to customers across worldwide locations.

Technical Support and Deployment Assistance

LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.

Pre-Sales Technical Consultation

Pre-Sales Technical Consultation

Technical consultation to help you verify compatibility and select the appropriate product for your application.

Compatibility Verification Support

Compatibility Verification Support

Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.

Deployment & Installation Assistance

Deployment & Installation Assistance

Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.

Long-Term Technical Assurance

Long-Term Technical Assurance

Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.

Industry Standards, Compliance and Quality Assurance

LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」

ISO 9001 Quality Management System Certification

ISO 9001 Quality Management

Manufactured under certified quality management processes to ensure consistent product quality and production control.

IEEE 802.3 Ethernet Standard Compliance

IEEE 802.3 Standards Compliance

Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.

RoHS Compliance

RoHS Compliance

Manufactured using materials that support restrictions on hazardous substances for global market requirements.

REACH Compliance

REACH Compliance

Material declarations and supply chain processes support applicable REACH regulatory requirements.

Product Safety Assurance

Product Safety Assurance

Selected products support recognized safety and reliability requirements for networking applications.

Reliability Verification Testing

Reliability Verification Testing

Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.

Warranty and After-Sales Service

LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.

15 days

15-day no-reason return and refund

Free maintenance or replacement

Free replacement for dead-on-arrival (DOA) or defective items within the initial period

Free maintenance

Free repair services for manufacturing defects throughout the warranty period

Limitations

Warranty exclusions and conditions apply

Keyword: