X Multiple XMK-9742-8824-433D-L1-A Compatible LINK-PP LPJE104AENL Tab Down Green/Yellow LED 1X4 Port RJ45 Modular without Integrated Magnetics
P/N:
LPJE104AENL
Manufacturer:
LINK-PP
Compatible Brand:
X Multiple
Compatible P/N:
XMK-9742-8824-433D-L1-A
- Compatible Brands: X Multiple
- Number of Ports: 1x4
- Pin Type: THT SOLDER
- LED Option: Green/Yellow
- Latch: Down
- Temperature: -40℃ to +85℃
- Shield EMI Tabs: YES
- Orientation: 90° Angle
- P/N: LPJE104AENL
- Manufacturer: LINK-PP
- Compatible Brand: X Multiple
- Compatible P/N: XMK-9742-8824-433D-L1-A
Packaging Details:
N.W/pCS:
0.026kg
Package:
Tray
SPQ:
30pcs
Qty/carton:
600pcs
Carton size:
46.5*27.5*24.5cm
G.W/carton:
15.8kg
Product Specifications
| LINK-PP Part Number: | LPJE104AENL | X Multiple Part Number | XMK-9742-8824-433D-L1-A |
| Part Status | Active | Connector Type | Jack |
| Number of Positions/Contacts | 8p8c (RJ45, Ethernet) | Application-Lan | - |
| Number of Ports | 1x4 Port | Speed | - |
| Latch | Down | Cores per Port | - |
| Orientation | 90° Angle (Right) | PCB Mount Angle | SIDE ENTRY |
| Shield EMI Tabs | With | LED Option | Green/Yellow |
| PCB | FR4 | PCB Retaining Post | T POST |
| Package Height (Inches/mm) | 0.533/13.55 | Package Length (Inches/mm) | 0.839/21.3 |
| Package Width (Inches/mm) | 2.328/59.12 | Temperature | -40℃ TO 85℃ |
| Bst Circuit | Yes | AutomDX | YES |
| Diodes | No | Contact Mating Area Plating | GOLD 6u"/15u"/30u" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T,C |
X Multiple XMK-9742-8824-433D-L1-A Compatible LINK-PP LPJE104AENL 1x4 Multi-Port Non-Magnetic RJ45 Jack Technical Overview
The LINK-PP LPJE104AENL (engineered as a direct 100% pin-to-pin and mechanical drop-in replacement for X Multiple XMK-9742-8824-433D-L1-A) is an industrial-grade 1x4 ganged multi-port (4-port total) non-magnetic RJ45 modular jack featuring integrated Green/Yellow status LEDs, metal EMI shield spring tabs, and solderless T-Post PCB retention. Designed specifically for high-port-count industrial PCs, multi-port routers, and IP intercom controllers utilizing discrete on-board Ethernet transformers and PHY transceivers, it provides a 4-port physical interconnect, 1500Vrms isolation pass-through, and extended operating temperature endurance from -40°C to +85°C.
- 1x4 Ganged 4-Port Integrated Architecture: Consolidates four RJ45 ports side-by-side into a single 59.12mm wide metal-shielded housing, saving PCB front-panel real estate and SMT placement cycles.
- Non-Magnetic Modular Jack Design: Pure 8p8c physical connector array without internal magnetic transformers or chokes, ideal for mainboard architectures with discrete board-mounted magnetics.
- Industrial Temperature Endurance (-40°C to +85°C): Certified for severe thermal operating environments (-40°F to +185°F) with optional 6u", 15u", or 30u" gold contact plating for industrial PCs and intercoms.
- Direct Cross-Reference Replacement: Fully qualified footprint and mechanical drop-in replacement for X Multiple XMK-9742-8824-433D-L1-A for BOM cost optimization and secondary sourcing.
LINK-PP LPJE104AENL 1x4 Ganged Modular RJ45 Jack Overview
LINK-PP LPJE104AENL is a right-angle side-entry 1x4 ganged 4-port RJ45 modular jack without internal magnetics. Designed for hardware architectures where signal transformers and common-mode chokes are placed discretely on the motherboard, this non-magnetic connector array provides a 4-port physical interface. Featuring Green/Yellow visual status LEDs per port, metal EMI spring tabs for 360-degree panel grounding, and T-Post THT mounting, it simplifies high-density layout in Industrial PCs, multi-port routers, commercial intercom consoles, and SMPS power distribution units.
Key Benefits of LINK-PP LPJE104AENL / X Multiple XMK-9742-8824-433D-L1-A Compatible RJ45 Jack
- 1x4 Ganged 4-Port Consolidation Saves Front-Panel Space: Combines four RJ45 ports side-by-side into a single 59.12mm wide housing, streamlining automated Pick & Place insertion compared to discrete single-port connectors.
- Pure Non-Magnetic Architecture for Discrete Transformer Designs: Allows hardware engineers to place specialized high-voltage discrete transformers, multi-channel PHY magnetics, or custom EMI filtering networks directly on the motherboard.
- Industrial Operating Temperature Range (-40°C to +85°C): Built with high-grade FR4 substrate and durable housing to withstand severe thermal fluctuations in unconditioned outdoor equipment and factory automation cabinets.
- EMI Shield Tabs for Enhanced Panel Grounding: Outfitted with external EMI spring tabs on the metal shield frame that press tightly against chassis front panel cutouts, forming a low-impedance grounding loop to suppress radiated emissions.
- Integrated Green/Yellow Diagnostic LEDs per Port: Built-in LED indicators provide clear visual diagnostics for Ethernet link establishment and data activity status on each port.
- Direct Second Sourcing for X Multiple XMK-9742-8824-433D-L1-A: Identical 1x4 through-hole PCB land pattern and pinout allow seamless drop-in secondary sourcing to reduce procurement lead times.
Non-Magnetic Architecture & 1x4 Ganged Board Design Advantages
The LINK-PP LPJE104AENL utilizes a specialized 1x4 Ganged Non-Magnetic Modular Jack architecture that embeds no internal transformers, common-mode chokes, or resistors inside the connector housing.
Discrete Transformer Design Compatibility
In industrial PCs and multi-port commercial routers, system designers frequently place discrete multi-channel transformer chips directly on the mainboard to achieve custom surge protection ratings, high-voltage galvanic isolation (>2KVrms), or to match multi-port PHY transceiver reference designs. The LPJE104AENL provides a robust 4-port physical interconnect without introducing redundant internal inductance or signal distortion.
1x4 Ganged Package Geometry & EMI Shielding
With package dimensions of 13.55mm H x 21.3mm L x 59.12mm W, the LPJE104AENL provides a compact 4-port footprint. The metal shield features dedicated EMI spring tabs that establish 360-degree contact with the chassis faceplate, while T-Post mechanical pegs anchor the housing firmly to the motherboard during cable plugging.
Target Applications: Industrial PCs, Routers, Intercoms, and SMPS
Combining 1x4 4-port ganged density, non-magnetic architecture, Green/Yellow LEDs, EMI shield spring tabs, and industrial thermal endurance (-40°C to +85°C), the LINK-PP LPJE104AENL supports diverse embedded systems:
- Industrial PCs (IPC) & Single Board Computers: Ideal for multi-LAN industrial computers, DIN-rail automation controllers, and embedded mainboard expansion cards.
- Multi-Port Routers & Ethernet Gateways: Deployed in commercial multi-port routers, SD-WAN edge gateways, and industrial security firewalls.
- Commercial IP Intercom Consoles & SMPS Units: Suitable for multi-channel IP door stations, master intercom consoles, and SMPS power distribution modules.
How to Select and Verify LPJE104AENL vs. X Multiple XMK-9742-8824-433D-L1-A
Hardware design engineers and procurement specialists evaluating the LINK-PP LPJE104AENL as a second-source replacement for X Multiple XMK-9742-8824-433D-L1-A should verify the following core parameters:
- Discrete Magnetics Verification: Confirm that your motherboard schematic includes on-board discrete Ethernet transformers and PHY magnetics, as this jack contains no internal magnetics.
- 1x4 Footprint & Package Width Alignment: Confirm that the 1x4 ganged through-hole pin arrangement, 59.12mm package width, and T-Post peg locations match the X Multiple XMK-9742-8824-433D-L1-A PCB land pattern.
- Green/Yellow LED Driving Polarity: Confirm that the Green/Yellow LED configuration and pin driving polarity match your host SMT LED driver schematic.
- Operating Temperature Requirements: Confirm that the -40°C to +85°C industrial temperature envelope satisfies your product's environmental specification.
Frequently Asked Questions
Is LINK-PP LPJE104AENL compatible with X Multiple XMK-9742-8824-433D-L1-A?
Yes. LINK-PP LPJE104AENL is a direct 100% mechanical, electrical, and footprint drop-in replacement for X Multiple XMK-9742-8824-433D-L1-A, featuring the same 1x4 ganged 4-port non-magnetic RJ45 layout with Green/Yellow LEDs.
Does LINK-PP LPJE104AENL contain internal Ethernet magnetics?
No. LPJE104AENL is a pure non-magnetic RJ45 modular jack array designed for board architectures that use discrete isolation transformers and common-mode chokes mounted directly on the motherboard.
What is the port configuration of LPJE104AENL?
LPJE104AENL features a 1x4 ganged port configuration, providing four independent RJ45 Ethernet ports (1 row x 4 columns) in a single 59.12mm wide package.
What is the operating temperature range of LPJE104AENL?
LINK-PP LPJE104AENL is rated for an industrial operating temperature range of -40°C to +85°C (-40°F to +185°F), making it suitable for unconditioned outdoor equipment and telecom racks.
Does LINK-PP LPJE104AENL include integrated status LEDs?
Yes. LPJE104AENL features integrated Green/Yellow status LEDs per port to provide visual link speed and data traffic diagnostics.
Does LINK-PP LPJE104AENL include EMI shielding tabs?
Yes. LPJE104AENL is equipped with external EMI shield spring tabs on the metal housing that press against chassis panel bezel cutouts to establish a low-impedance ground loop and minimize RF radiation.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































