LPJE681BFNL 1X1 Port Vertical RJ45 Jack Connector without Integrated Magnetics Green/Green LED
P/N:
LPJE681BFNL
Manufacturer:
LINK-PP
Compatible Brand:
LINK-PP
Compatible P/N:
LPJE681BFNL
- Compatible Brands: LINK-PP
- Number of Ports: 1x1
- Pin Type: THT SOLDER
- LED Option: Green/Green
- Latch: Up
- Temperature: -40℃ to +85℃
- Shield EMI Tabs: NO
- Orientation: 180° Angle
- P/N: LPJE681BFNL
- Manufacturer: LINK-PP
- Compatible Brand: LINK-PP
- Compatible P/N: LPJE681BFNL
Packaging Details:
N.W/pCS:
0.007kg
Package:
Tray
SPQ:
100pcs
Qty/carton:
3000pcs
Carton size:
46.5*29.5*36cm
G.W/carton:
20.1kg
Product Specifications
| LINK-PP Part Number | LPJE681BFNL | Connector Type | RJ45 Modular Jack (Without Magnetics) |
| Part Status | Active | Mounting Type | Through Hole (THT) |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | External Magnetics Dependent |
| Number of Ports | Single Port (1×1) | Speed | External PHY / Magnetics Dependent |
| Latch Orientation | Up (Tab-Up) | Cores per Port | Non-Magnetic (External Discrete Required) |
| Orientation | 180° Vertical (Top Entry) | PCB Mount Angle | Vertical / Straight Entry |
| Shield EMI Tabs | Without EMI Tabs | LED Option | Green / Green |
| PCB Material | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.665 / 16.90 | Package Length (Inches/mm) | 0.657 / 16.70 |
| Package Width (Inches/mm) | 0.630 / 16.00 | Operating Temperature | -40°C to +85°C (Industrial) |
| BST Circuit | External Implementation Supported | AutoMDX | External PHY Dependent |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio (RX/TX) | Discrete Transformer Dependent | Configuration (RX/TX) | Discrete Transformer Dependent |
Vertical 180° 8P8C RJ45 Modular Jack (Without Magnetics)
The LINK-PP LPJE681BFNL is an industrial-grade single-port 8P8C RJ45 modular jack connector engineered in a vertical 180° top-entry through-hole configuration without integrated magnetics. Designed for hardware architectures utilizing discrete LAN transformers or non-magnetic differential interfaces, the connector provides direct copper pass-through, dual Green status LEDs, and reliable physical contact performance across the specified -40°C to +85°C operating temperature range.
The mechanical assembly features a Tab-Up latch orientation, a smooth metal shield without perimeter EMI tabs, and molded T-Post retaining pins. With an installed height of 16.90 mm and a square 16.70 mm × 16.00 mm footprint, the LPJE681BFNL provides a standardized top-entry physical connection suited for embedded single-board computers (SBCs), industrial PCs (IPCs), network switches, routers, and entrance guard systems.
Compatibility and Design Positioning
The LPJE681BFNL can be evaluated as an alternative sourcing option for standard 8P8C single-port vertical 180° top-entry modular RJ45 jacks without integrated magnetics. It provides direct design relevance for hardware designs requiring vertical through-hole mounting, dual Green LED status indicators, a smooth tab-less shield exterior, and an industrial -40°C to +85°C temperature range. Engineering teams should cross-reference terminal pin assignments, T-Post hole locations, LED drive circuits, and mechanical clearances against the official LINK-PP technical drawing before production release.
Procurement and OEM Qualification
For sourcing teams and OEM engineering programs evaluating the LPJE681BFNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical contact parameters, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning.
Vertical 180° Top-Entry Topology and Chassis Design Optimization
Implementing a vertical 180° modular RJ45 jack provides distinct mechanical and packaging advantages for specific enclosure formats:
- Perpendicular Cable Access: The 180° top-entry orientation allows network cables to mate perpendicularly to the host PCB plane, supporting top-facing faceplates in DIN-rail controllers, machine enclosures, and shallow wall-mount terminals.
- 16.90 mm Vertical Height: The 16.90 mm housing height provides adequate mechanical engagement for standard RJ45 plugs while fitting compact vertical enclosure envelopes.
- -40°C to +85°C Industrial Operating Range: The -40°C to +85°C specification defines the stated operating temperature range of the connector assembly, ensuring contact spring retention and plastic housing integrity across extreme thermal swings.
- Shield Without EMI Tabs: A smooth shield exterior devoid of external spring fingers prevents mechanical snagging, binding, or bending during insertion into tight front-panel bezels or non-conductive enclosures.
- Mechanical T-Post Retention: Molded plastic posts anchor the connector housing to the FR4 PCB, absorbing vertical mating forces and cable pull stresses to protect electrical solder joints.
Electrical Contact Architecture and Discrete Magnetics Flexibility
As a non-magnetic modular jack, the LPJE681BFNL provides a direct 8-contact electrical pathway without internal transformer cores, common-mode chokes, or termination resistors. This architecture delivers critical layout and protocol flexibility for hardware designers:
By decoupling the physical I/O jack from signal magnetics, designers are free to select discrete transformer modules matched to specific Ethernet PHY requirements (such as specialized isolation ratings, high surge tolerances, or multi-port discrete transformers). Furthermore, the direct-contact architecture supports non-Ethernet differential standards, such as RS-485, RS-422, custom serial buses, or specialized telecom protocols where internal magnetics would otherwise block DC bias or low-frequency signaling. When deployed in Ethernet applications, Bob Smith termination (BST) circuits and AutoMDX functionality are implemented on the host PCB alongside the chosen discrete transformer.
Mechanical Envelope and PCB Layout Considerations
When integrating the LPJE681BFNL into host hardware layouts, engineering teams should account for the following structural and electrical parameters:
1. Package Dimensions and Vertical Headroom
The connector body measures 16.90 mm (0.665 inches) in height, 16.70 mm (0.657 inches) in length, and 16.00 mm (0.630 inches) in width. Enclosure designers must ensure adequate vertical clearance above the jack to accommodate the connector height plus the minimum bend radius of the mating patch cable.
2. Vertical Top-Entry Mating Mechanics and T-Post Retention
Because vertical top-entry connectors experience direct downward insertion and upward extraction forces, accurate drill hole sizing for the molded T-Posts is critical. Proper mechanical anchoring ensures physical stress is absorbed by the PCB substrate rather than through-hole solder joints.
3. Shield Grounding Without EMI Tabs
With an exterior shield lacking perimeter spring fingers, chassis grounding is achieved via dedicated through-hole shield solder pins. These pins should connect directly to a low-impedance chassis ground plane on the host PCB.
4. Status LED Circuitry
The connector incorporates dual Green status indicators. Hardware engineers should implement suitable series current-limiting resistors matching the host drive voltage and target forward current specifications.
Design Consideration Comparison: Modular RJ45 Jack vs. Integrated MagJack
| Design Consideration | LPJE681BFNL Vertical Modular RJ45 Jack |
Integrated Vertical RJ45 MagJack |
|---|---|---|
| Magnetics Integration | Non-magnetic; requires external discrete LAN transformer | Integrated internal transformer and choke assembly |
| Protocol & Signal Flexibility | Broad (Ethernet, RS-485, Serial, Custom Telecom) | Fixed standard Ethernet signaling only |
| PCB Assembly Operations | Multiple placements (Discrete transformer + Jack) | Single through-hole placement |
| Vertical Height Envelope | 16.90 mm profile | Model-dependent vertical profile |
| PCB Placement Flexibility | Discrete magnetics placeable near PHY; jack placed at edge | Magnetics and connector constrained to board edge |
| Primary Engineering Focus | Custom magnetic matching and multi-protocol flexibility | Consolidated single-component Ethernet interface |
Application Considerations for LPJE681BFNL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Embedded SBCs & Industrial PCs (IPCs) | Vertical top-entry mating enables perpendicular cable connection in compact, shallow enclosures. |
| Network Switches, Routers & Gateways | Allows pairing with customized discrete magnetics solutions tailored to multi-port PHY transceiver requirements. |
| Building Entrance Guard & Security Intercoms | Tab-less shield allows smooth insertion into flush-mount panel bezels and wall-mount enclosures. |
| Multi-Protocol Serial & Fieldbus Controllers | Direct 8P8C pass-through supports DC-coupled RS-485, RS-422, or proprietary serial signaling over RJ45 cabling. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials using the LPJE681BFNL, hardware engineers should confirm the following design parameters against official documentation:
- Footprint and Pinout Verification: Verify 8P8C signal pin layout, LED pin locations, and T-Post drill sizes against the official LINK-PP LPJE681BFNL drawing.
- Enclosure Headroom & Cable Strain Relief: Confirm that the chassis provides sufficient vertical clearance above the connector for plug insertion, latch release, and cable bend radius.
- LED Drive Polarity and Resistors: Check the host drive circuitry and select appropriate series current-limiting resistors for the dual Green LEDs.
- Chassis Grounding Path: Verify that the PCB shield pins connect to a low-impedance ground plane to ensure shielding continuity without exterior EMI tabs.
- Discrete Magnetics Integration: When used in Ethernet systems, confirm that an external discrete LAN transformer matching the PHY's turns ratio and isolation requirements is implemented on the host PCB.
- Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified -40°C to +85°C industrial temperature range.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJE681BFNL?
The LPJE681BFNL is an industrial-grade single-port 8P8C RJ45 modular jack without integrated magnetics. It features a vertical 180° top-entry through-hole configuration, Tab-Up latch orientation, a metal shield without EMI tabs, dual Green LEDs, T-Post PCB retention, and an operating temperature range of -40°C to +85°C.
Why select an RJ45 modular jack without integrated magnetics?
Non-magnetic modular jacks give hardware designers complete flexibility to select external discrete transformers matched to specific PHY silicon or specialized isolation requirements. Additionally, non-magnetic jacks support non-Ethernet protocols—such as RS-485, RS-422, or custom serial buses—where internal magnetics would block DC or low-frequency signals.
What are the engineering benefits of the 180° vertical top-entry orientation?
A 180° vertical orientation allows network cables to plug in perpendicularly to the PCB surface. This is advantageous for DIN-rail automation controllers, top-accessible industrial computers, and compact security terminals where cables must connect directly through the top or front faceplate rather than along a crowded board edge.
Why does the LPJE681BFNL feature a shield without EMI tabs?
A shield without exterior spring tabs provides a smooth exterior contour that prevents mechanical snagging when installing the connector into flush-fitting front-panel bezels or non-conductive enclosures. Grounding is achieved securely through through-hole PCB shield pins connected to the system chassis ground.
How are the dual Green LEDs driven on the host PCB?
The connector includes dual Green status indicators. The LED functions should be configured according to host system logic and the connector's electrical specifications. Series current-limiting resistors should be sized according to host supply voltages to achieve target brightness levels.
Can the LPJE681BFNL be used in Power over Ethernet (PoE) applications?
Because the LPJE681BFNL is a modular jack without integrated magnetics, PoE suitability depends on the external discrete magnetics, power extraction circuitry, and PCB trace current ratings implemented on the host board. The physical connector contacts and plating must be verified against the intended PoE DC current and mating cycle requirements.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
FAQ
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































