Amphenol RJTX-18FX-XNRX-06 Compatible LINK-PP LPJ1078AHNL 10/100 Base-T Tab Up Green/Yellow Led Single Port Socket RJ45 Ethernet Connector
P/N:
LPJ1078AHNL
Manufacturer:
LINK-PP
Compatible Brand:
Amphenol
Compatible P/N:
LPJ1078AHNL
- Compatible Brands: Amphenol
- Number of Ports: 1X1
- Speed: 10Base-T,100Base-TX
- PoE: Non-PoE
- Latch: Up
- Mounting Type: THT
- LED Option: Green / Yellow
- Shield EMI Tabs: YES
- Temperature: 0℃ to 70℃
- P/N: LPJ1078AHNL
- Manufacturer: LINK-PP
- Compatible Brand: Amphenol
- Compatible P/N: RJTX-18FX-XNRX-06
Packaging Details:
N.W/pCS:
0.009kg
Package:
Tray
SPQ:
50pcs
Qty/carton:
1000pcs
Carton size:
32*30*31cm
G.W/carton:
8.5kg
Product Specifications
| LINK-PP Part Number: | LPJ1078AHNL | Amphenol Part Number | RJTX-18FX-XNRX-06 |
| Part Status | Active | Connector Type | RJ45 MagJack (Integrated Magnetics) |
| Number of Positions/Contacts | 8P8C (RJ45, Ethernet) | Application-LAN | Ethernet (Non-PoE) |
| Number of Ports | 1×1 Port | Speed | 10/100BASE-T |
| Latch | Tab-Up | Cores per Port | 5 |
| Orientation | 90° Right Angle | PCB Mount Angle | Side Entry |
| Shield EMI Tabs | With | LED Option | Green / Yellow |
| PCB | FR4 | PCB Retaining Post | T-Post |
| Package Height (Inches/mm) | 0.530 / 13.45 | Package Length (Inches/mm) | 0.994 / 25.25 |
| Package Width (Inches/mm) | 0.636 / 16.15 | Operating Temperature | 0°C to +70°C |
| BST Circuit | Yes | AutoMDX | Yes |
| Diodes | No | Contact Mating Area Plating | Gold 6µ" / 15µ" / 30µ" |
| Turns Ratio RX/TX | 1CT:1CT | Configuration RX/TX | T, C |
Single-Port 10/100BASE-T RJ45 MagJack
The LINK-PP LPJ1078AHNL is a single-port 10/100BASE-T Fast Ethernet RJ45 MagJack in a right-angle, side-entry through-hole configuration. The Ethernet interface incorporates an internal 5-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The connector also includes Bob Smith termination (BST), AutoMDX support, Green/Yellow LEDs, and a specified operating temperature range of 0°C to +70°C.
The mechanical package features a housing height of 13.45 mm (0.530 inches), a length of 25.25 mm (0.994 inches), and a width of 16.15 mm (0.636 inches). Designed with a Tab-Up latch orientation, perimeter shield EMI tabs, and molded T-Posts for PCB retention, the LPJ1078AHNL provides a compact board-level Ethernet interface for smart cameras, solar inverters, industrial controllers, gaming devices, and embedded networking equipment.
Compatibility and Design Positioning
The LINK-PP LPJ1078AHNL is positioned as a cross-reference and alternative sourcing option for the Amphenol RJTX-18FX-XNRX-06 single-port 10/100BASE-T RJ45 MagJack. It provides a comparable 1×1 port architecture, 10/100BASE-T interface, 1CT:1CT turns ratio, 5-core-per-port configuration, Tab-Up latch orientation, Green/Yellow LEDs, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, LED circuitry, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.
Procurement and OEM Qualification
For sourcing teams and OEM engineering programs evaluating the LPJ1078AHNL as a second-source or BOM alternative, key qualification parameters include PCB mechanical footprint, pinout alignment, LED drive characteristics, electrical characteristics, operating temperature rating, and expected volume demand. LINK-PP can support sample evaluation, mechanical drawing review, and documentation requirements for prototype validation, AVL qualification, and volume production planning. Sourcing teams should verify lead-time requirements, applicable packaging requirements, and contact plating selection (6µ", 15µ", or 30µ") based on project lifecycle demands.
Tab-Up Latch Topology and Enclosure Front-Panel Optimization
Integrating Fast Ethernet magnetics into a Tab-Up RJ45 connector assembly provides practical packaging and mechanical layout considerations for embedded hardware:
- Tab-Up Latch Orientation: The RJ45 plug release latch is positioned on the upper side of the port, which can improve release-tab accessibility in board-edge layouts when sufficient enclosure clearance is provided.
- 13.45 mm Vertical Height: The 13.45 mm (0.530 inches) housing height supports space-constrained board-edge and embedded hardware designs where enclosure clearance is limited.
- 0°C to +70°C Operating Range: The 0°C to +70°C specification defines the stated operating temperature range of the connector assembly. Final system qualification should consider the expected internal equipment temperature together with the PHY, PCB, enclosure, and airflow conditions.
- EMI Tabs & T-Post Retention: The metal shield includes perimeter EMI tabs designed for system-level chassis contact, while molded T-Post features help locate and mechanically retain the connector on the host PCB.
Integrated 5-Core Magnetics and AutoMDX Support
The Ethernet port incorporates an internal 5-core magnetic structure with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection while reducing the need for separate discrete magnetic components on the host board.
The connector includes a Bob Smith termination (BST) circuit and is specified for Ethernet interfaces supporting AutoMDX operation. Hardware designers should evaluate the MagJack together with the selected PHY reference design, differential-pair routing, PCB grounding, and system-level EMC requirements. The LPJ1078AHNL is specified for non-PoE Ethernet applications.
Mechanical Envelope and PCB Layout Considerations
When integrating the LPJ1078AHNL into host hardware layouts, engineering teams should observe the following structural and layout parameters:
1. Package Dimensions and Front-Panel Cutout
The connector body measures 13.45 mm (0.530 inches) in height, 25.25 mm (0.994 inches) in length, and 16.15 mm (0.636 inches) in width. Front-panel openings should provide appropriate clearance for the connector shield profile, EMI tabs, and cable plug access.
2. Tab-Up Latch Headroom and Servicing
Because the release latch is oriented on the top face, designers should provide adequate vertical clearance above the connector port to ensure field technicians can access and depress the plug latch during servicing.
3. RJ45 Interface and PCB Footprint
The connector provides an 8P8C RJ45 Ethernet interface together with through-hole PCB terminations for the integrated magnetics, shield, LEDs, and mechanical retention features. Designers should use the official LPJ1078AHNL drawing to verify terminal numbering, LED connections, drill-hole diameters, T-Post locations, and PCB clearance requirements before releasing the footprint.
4. Status LED Interface
The connector includes Green and Yellow status LEDs. Hardware engineers should verify LED pin assignment, polarity, drive requirements, and any required external components against the LPJ1078AHNL electrical documentation and the selected PHY reference design.
Design Consideration Comparison: Integrated MagJack vs. Discrete Solution
| Design Consideration | LPJ1078AHNL Integrated Tab-Up MagJack |
Discrete 10/100 Magnetics + Modular RJ45 Jack |
|---|---|---|
| Component Integration | Magnetics and RJ45 connector integrated in one housing | Separate magnetics and RJ45 connector components |
| PCB Assembly | Single integrated connector assembly | Multiple placements (SMD transformer + through-hole jack) |
| Connector Selection | Integrated RJ45 port geometry | Flexible external connector selection |
| Board-Edge Layout | Consolidated footprint at board edge | Requires trace routing between discrete magnetics and connector |
| Vertical Height Envelope | Fixed 13.45 mm profile | Model-dependent |
| Front-Panel Shielding | Integrated metal shield with perimeter EMI tabs | Dependent on chosen external RJ45 shield design |
| Primary Engineering Focus | Consolidated 10/100BASE-T interface and integrated connector architecture | Independent component placement and routing flexibility, depending on the selected implementation |
Application Considerations for LPJ1078AHNL
| Target Application Profile | Primary Engineering Consideration |
|---|---|
| Smart Cameras & Vision Systems | Tab-Up latch orientation and compact housing profile support board-edge integration in networked surveillance devices. |
| Solar Inverters & Power Controllers | Perimeter shield tabs support system-level chassis grounding in power management and monitoring hardware. |
| Industrial Controllers & Automation | Integrated 10/100BASE-T magnetics, BST circuitry, and status LEDs consolidate the physical interface into a single through-hole assembly. |
| Gaming Devices & Embedded Equipment | Green and Yellow LEDs can be configured through the host PHY for supported link, speed, or activity indication functions. |
Engineering Verification Checklist
Before releasing a PCB layout or finalizing a bill of materials using the LPJ1078AHNL, hardware engineers should confirm the following design parameters against official documentation:
- Footprint and Pinout Verification: Verify RJ45 interface connections, PCB terminal numbering, LED connections, T-Post locations, and shield-pin positions against the official LINK-PP LPJ1078AHNL drawing.
- Tab-Up Headroom Clearance: Confirm that the enclosure cutout provides sufficient vertical clearance above the port for cable plug latch engagement and release.
- LED Interface Verification: Verify the Green/Yellow LED pin assignment, polarity, drive requirements, and host PHY configuration against the applicable product and PHY documentation.
- Shield and Chassis Grounding: Verify the connector shield-pin and EMI-tab implementation against the host system grounding, enclosure, and EMC design requirements.
- PHY Magnetics Compatibility: Confirm that the 1CT:1CT turns ratio and BST termination topology align with the transceiver manufacturer's reference schematic.
- Thermal Environment: Ensure that the operating environment inside the equipment chassis remains within the specified 0°C to +70°C commercial temperature range.
Frequently Asked Questions
What are the primary specifications of the LINK-PP LPJ1078AHNL?
The LPJ1078AHNL is a single-port 10/100BASE-T non-PoE Ethernet RJ45 MagJack. It features an 8P8C interface, 5-core integrated magnetics per port, a 1CT:1CT turns ratio, Tab-Up latch orientation, side-entry through-hole mounting, Green/Yellow LEDs, an integrated BST circuit, AutoMDX support, and a specified operating temperature range of 0°C to +70°C.
Is the LINK-PP LPJ1078AHNL compatible with the Amphenol RJTX-18FX-XNRX-06?
The LPJ1078AHNL is positioned as a cross-reference and alternative sourcing option for the Amphenol RJTX-18FX-XNRX-06 single-port 10/100BASE-T RJ45 MagJack. It provides a comparable 1×1 port architecture, 10/100BASE-T interface, 1CT:1CT turns ratio, 5-core-per-port configuration, Tab-Up latch orientation, Green/Yellow LEDs, and 0°C to +70°C operating range. Engineering and procurement teams should verify pin assignment, PCB footprint, LED circuitry, electrical characteristics, and mechanical dimensions against the applicable official drawings before approving a component substitution.
What are the advantages of the Tab-Up latch orientation in board-edge layouts?
A Tab-Up orientation places the RJ45 plug release latch on the upper side of the connector. This can improve access to the release tab in board-edge designs where sufficient clearance is available above the connector. Enclosure geometry should be verified against the product drawing.
What is the function of the internal 5-core magnetics architecture?
The LPJ1078AHNL specifies a 5-core integrated magnetic structure for its 10/100BASE-T Ethernet interface, with a 1CT:1CT turns ratio and T, C configuration. The integrated magnetics provide the electrical interface between the Ethernet PHY and the cable-side RJ45 connection. Engineers should refer to the applicable LINK-PP schematic and electrical documentation for the exact magnetic topology and termination arrangement.
How are the Green and Yellow LEDs driven on the host PCB?
The connector includes separate Green and Yellow status indicators. The LED functions should be configured according to the host PHY reference design and the connector's electrical specifications. Depending on the selected LED control scheme, the indicators may be used for link speed, link status, or activity indication.
Does the LPJ1078AHNL support Power over Ethernet (PoE)?
No. The LPJ1078AHNL is specified as a non-PoE Ethernet data interface. For applications requiring PoE power delivery, a connector and magnetics solution specifically rated for the required IEEE 802.3 PoE standard and DC current conditions should be selected.
Packaging, Shipping and Global Delivery for Networking Products
Anti-static packaging, shock-resistant protection, fast order dispatch, and reliable worldwide delivery for all LINK-PP networking products.
Anti-Static Protective Packaging
Protect networking products from electrostatic discharge and handling-related damage.
Shock-Resistant Transport Protection
Protect products against physical impacts during storage and international transportation.
Fast Order Processing and Dispatch
Accelerate order handling to ensure quick warehouse deployment.
Global Logistics and International Delivery
Ship products efficiently to customers across worldwide locations.
Technical Support and Deployment Assistance
LINK-PP provides expert technical support, from product selection and compatibility verification to deployment and long-term operation.
Pre-Sales Technical Consultation
Technical consultation to help you verify compatibility and select the appropriate product for your application.
Compatibility Verification Support
Verification support to help ensure compatibility with your equipment, applications, and deployment requirements.
Deployment & Installation Assistance
Comprehensive step-by-step guidance for installation, configuration, and initial setup, ensuring accurate deployment and reliable, stable operation from the start.
Long-Term Technical Assurance
Ongoing technical support throughout the product lifecycle, delivering long-term stability for enterprise and carrier-grade networks.
Industry Standards, Compliance and Quality Assurance
LINK-PP products are manufactured under recognized quality management systems and designed to support applicable industry standards, regulatory compliance, and long-term deployment requirements, including IEEE 802.3, RoHS, REACH, ISO 9001, and ISO 14001 where applicable. 「View Quality & Compliance Center」
ISO 9001 Quality Management
Manufactured under certified quality management processes to ensure consistent product quality and production control.
IEEE 802.3 Standards Compliance
Designed in accordance with applicable networking and Ethernet standards, including IEEE specifications where relevant.
RoHS Compliance
Manufactured using materials that support restrictions on hazardous substances for global market requirements.
REACH Compliance
Material declarations and supply chain processes support applicable REACH regulatory requirements.
Product Safety Assurance
Selected products support recognized safety and reliability requirements for networking applications.
Reliability Verification Testing
Products undergo verification and quality testing to support stable operation in enterprise, telecom, and industrial environments.
Warranty and After-Sales Service
LINK-PP provides warranty coverage and after-sales support to help ensure stable operation and long-term product performance.
15-day no-reason return and refund
Free replacement for dead-on-arrival (DOA) or defective items within the initial period
Free repair services for manufacturing defects throughout the warranty period
Warranty exclusions and conditions apply
Keyword:
Download
Product Drawing
3D Model
Q&A
What certifications does LINK-PP have?
LINK-PP holds ISO9001:2015 international quality system certification, ROHS environmental certification, UL, Reach, and ISO14001:2015 environmental certification.
Can i get free samples before i make big quantity purchase?
Yes, join us as a business account, we could offer free samples to you for evaluation. Or you could return or pay after you test the samples.
Recommend
-
Nav Menu
-
About LINK-PP
-
All Products
-
Applications







































